封装信息
| Lead Count (#) | 16 |
| Pkg. Type | MODULE |
| Pitch (mm) | 1.5 |
| Pkg. Dimensions (mm) | 12.5 x 14.5 x 2.8 |
环境和出口类别
| ECCN (US) | EAR99 |
| HTS (US) | 8542.39.90 |
| Moisture Sensitivity Level (MSL) | 3 |
| Pb (Lead) Free | Yes |
产品属性
| Pkg. Type | MODULE |
| Lead Count (#) | 16 |
| Carrier Type | Tape & Reel |
| ADC | 10-bit x 4-ch |
| Application | Medical, Beacons, Proximity tags & trackers, Disposables, ATLASlite, HID, IoT, Data pipes |
| Flash Memory (KB) | 128, 0 |
| GPIOs (#) | 9 |
| Integrated DCDC | Buck |
| Output Power Range (dBm) | -19.5 - 4 |
| Rx current (mA) | 2.7 |
| Tx Current (mA) | 2.6 |
| Temp. Range | -40 to +85°C |
| Price (USD) | 1ku | 5.35137 |
| Country of Assembly | Thailand |
| 2Mbps | Not Supported |
| AoA | Not Supported |
| AoD | Not Supported |
| Bluetooth® Mesh | Not Supported |
| CPU | M0+ |
| Clock Rate (MHz) | 16 |
| Execute from FLASH | No |
| Extended Advertising | Not Supported |
| External Rails and Load Capacity | None |
| Flexible System Clock | Yes |
| GATT Caching | Not Supported |
| Hardware Crypto Engine | Yes |
| I2C (#) | 1 |
| Integrated Battery Charger | No |
| LE Coded PHY (Long Range) | Not Supported |
| LE Data Length Extensions | Supported |
| MCU/MPU | M0 + |
| MOQ | 1000 |
| Memory Size (OTP) (KB) | 12 |
| Moisture Sensitivity Level (MSL) | 3 |
| Operating Freq (Max) (MHz) | 16 |
| Pb (Lead) Free | Yes |
| Periodic Advertising | Not Supported |
| Pitch (mm) | 1.5 |
| Pkg. Dimensions (mm) | 12.5 x 14.5 x 2.8 |
| Proprietary 2G4 protocol | No |
| QSPI Interface (#) | 0 |
| Qty. per Reel (#) | 1000 |
| RAM (KB) | 64 |
| ROM (KB) | 160 |
| Recommended for new Designs | Yes |
| SPI (#) | 1 |
| Sensitivity (dBm) (dBm) | -92.5 |
| Supply Voltage Vcc Range | 1.8-3.6 |
| UART (#) | 2 |
| USB Ports (#) | 0 |
| Wireless Standard | BLE 5.3 Core specification |
描述
DA14535MOD 是功耗极低且成本低廉的独立式 Bluetooth® Low Energy 5.3 模块，通过全球认证，是多种应用的理想之选，包括将您的产品以无线方式连接到智能手机的快速升级项目，以便快捷而简便地调试/控制/报警/数据收集。 DA14535MOD 是在市场广泛采用的 DA14531MOD 的引脚和功能等效替代产品，两个模块均采用 Cortex-M0+，时钟频率为 16MHz，片上集成 RAM、ROM 和 OTP，并整合了 1Mbit 闪存、32MHz 晶振、功率电感器、射频匹配和印刷天线。 DA14535MOD 与 DA14531MOD 不同之处体现在以下关键特性上：
- 发射输出功率高达 +3dBm
- 64KB RAM、160KB ROM、12KB OTP
- BT5.3 合规性
- 2 线 UART 支持基于主机 MCU 的运行*
*此功能依赖于在工厂烧录期间添加到闪存中的二级引导加载程序。 对于还存在主机 MCU SoC 的应用，此功能允许使用主机 MCU 的存储器来存储和下载用于 BLE 数据泵的 DA14535MOD 代码。 此功能还可消除在最终产品生产测试期间进行 DA14535MOD 工厂烧录的需要。