特性
- This Circuit is Processed in Accordance to MIL-STD-883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1.
- Low "On" Release 100Ω Max
- Wide Analog Signal Range ±15V
- TTL/CMOS Compatible 2.4V (Logic "1")
- Turn-On Time 500ns
- Analog Current Range (Continuous) 25mA
- No Latch-Up
- Replaces DG200
描述
Support is limited to customers who have already adopted these products.
The HI-200/883 is a monolithic device comprising two independently selectable SPST switchers which feature fast switching speeds (240ns typical) combined with low power dissipation (15mW typical @ +25°C) Each switch provides low ON resistance operation for input signal voltages up to the supply rails and for signal currents up to 25mA continuous. Rugged DI construction eliminates latch-up and substrate SCR failure modes. All devices provide break-before-make switching and are TTL and CMOS compatible for maximum application versatility. HI-200/883 is an ideal component for use in high frequency analog switching. Typical applications include signal path switching, sample and hold circuits, digital filters, and op amp gain switching networks. HI-200/883 is available in a 14 pin Ceramic DIP package and a 10 pin Metal Can (TO-100) package.
应用
- High Frequency Analog Switching
- Sample and Hold Circuits
- Digital Filters
- Op Amp Gain Switching Networks
| Part Number | Status | Samples | Stock | Package | Lead Count (#) | Carrier Type | Moisture Sensitivity Level (MSL) | Pb (Lead) Free | Pb Free Category | MOQ | Temp. Range (°C) | CAGE code |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HI2-0200/883 | Obsolete | N/A | Out of Stock | CAN | 10# | Tray | Not Applicable | Yes | Gold Plate-e4 | 140 | -55 to +125°C | 34371 |
加载中
请登录后开启订阅
- EOL 通告英语PDF 200 KB PLC15033 2015年6月11日
- 产品咨询英语PDF 499 KB PA11003 2011年1月05日
- 产品咨询英语PDF 67 KB PA10098 2010年10月21日
- 应用说明英语PDF 843 KB an535 2002年6月05日AI 生成的摘要: A Data Acquisition System (DAS) requires careful design of signal conditioning, transducer selection, and signal transmission to ensure high accuracy. Signal conditioning includes multiplexing, amplification, filtering, and calibration, ideally performed near the transducer. Transducers convert physical variables to electrical signals, often voltage, with low source resistance preferred. Signal paths can be single-ended or differential; differential paths better reject common mode noise, especially for low-level signals. Shielded twisted pairs and balanced lines reduce interference. Filters, typically Butterworth low-pass, prevent aliasing and maintain signal integrity.
- 应用说明英语PDF 468 KB an557 2002年5月24日AI 生成的摘要: The document details recommended test procedures for analog switches, focusing on key parameters such as crosstalk, break-before-make delay, and settling time. It explains how to measure crosstalk using decibel ratios and outlines the importance of break-before-make delay to prevent simultaneous switch closure. Settling time is measured to ensure output stability after input changes. It also covers input thresholds, leakage currents, power dissipation, and various switch capacitances, providing test circuit examples and conditions for accurate measurement.
- 应用说明英语PDF 224 KB an9654 1999年5月05日AI 生成的摘要: The document explains the reliability and failure mechanisms of semiconductor parts, focusing on life testing and wearout. It discusses how switching states cause transient current pulses and hot carrier injection, which only occur briefly during switching. Life testing at elevated temperatures accelerates aging to remove infant mortality failures, improving reliability. The failure rate follows a bathtub curve with infant mortality, useful life, and wearout phases, modeled by lognormal and exponential distributions. The Arrhenius equation relates failure rates at different temperatures. Burn-in and life tests reduce early failures without harming intrinsic reliability.
- 应用说明英语PDF 300 KB an1034 1998年11月20日AI 生成的摘要: The document discusses the use of analog switches and multiplexers in wideband applications, highlighting the HI-524 monolithic wideband CMOS multiplexer and the HA-2541 amplifier. It emphasizes the importance of unity gain stability, fast settling time, and output swing for driving coaxial cables. The HI-524 includes feedback resistance to minimize offset voltage. Proper layout is crucial to avoid feedthrough and excessive capacitance. The document also outlines Renesas Electronics' disclaimers on product use, quality grades, safety responsibilities, environmental compliance, and legal restrictions.
- 应用说明英语PDF 270 KB an520 1998年11月20日AI 生成的摘要: Adding a pull-up resistor from CMOS inputs to +5V is essential when interfacing TTL outputs with CMOS inputs to improve interchangeability, noise immunity, compatibility, and reliability. A 2kΩ resistor is generally sufficient. CMOS inputs are compatible with CMOS logic at 5V to 15V without pull-ups. Mechanical switches require pull-up or pull-down resistors to prevent noise and contact issues. Renesas disclaims liability for misuse and emphasizes adherence to product specifications and legal regulations.
推荐文档 (2)
数据手册 (2)
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
- 应用说明英语PDF 843 KB an535 2002年6月05日AI 生成的摘要: A Data Acquisition System (DAS) requires careful design of signal conditioning, transducer selection, and signal transmission to ensure high accuracy. Signal conditioning includes multiplexing, amplification, filtering, and calibration, ideally performed near the transducer. Transducers convert physical variables to electrical signals, often voltage, with low source resistance preferred. Signal paths can be single-ended or differential; differential paths better reject common mode noise, especially for low-level signals. Shielded twisted pairs and balanced lines reduce interference. Filters, typically Butterworth low-pass, prevent aliasing and maintain signal integrity.
- 应用说明英语PDF 468 KB an557 2002年5月24日AI 生成的摘要: The document details recommended test procedures for analog switches, focusing on key parameters such as crosstalk, break-before-make delay, and settling time. It explains how to measure crosstalk using decibel ratios and outlines the importance of break-before-make delay to prevent simultaneous switch closure. Settling time is measured to ensure output stability after input changes. It also covers input thresholds, leakage currents, power dissipation, and various switch capacitances, providing test circuit examples and conditions for accurate measurement.
- 应用说明英语PDF 224 KB an9654 1999年5月05日AI 生成的摘要: The document explains the reliability and failure mechanisms of semiconductor parts, focusing on life testing and wearout. It discusses how switching states cause transient current pulses and hot carrier injection, which only occur briefly during switching. Life testing at elevated temperatures accelerates aging to remove infant mortality failures, improving reliability. The failure rate follows a bathtub curve with infant mortality, useful life, and wearout phases, modeled by lognormal and exponential distributions. The Arrhenius equation relates failure rates at different temperatures. Burn-in and life tests reduce early failures without harming intrinsic reliability.
- 应用说明英语PDF 300 KB an1034 1998年11月20日AI 生成的摘要: The document discusses the use of analog switches and multiplexers in wideband applications, highlighting the HI-524 monolithic wideband CMOS multiplexer and the HA-2541 amplifier. It emphasizes the importance of unity gain stability, fast settling time, and output swing for driving coaxial cables. The HI-524 includes feedback resistance to minimize offset voltage. Proper layout is crucial to avoid feedthrough and excessive capacitance. The document also outlines Renesas Electronics' disclaimers on product use, quality grades, safety responsibilities, environmental compliance, and legal restrictions.
- 应用说明英语PDF 270 KB an520 1998年11月20日AI 生成的摘要: Adding a pull-up resistor from CMOS inputs to +5V is essential when interfacing TTL outputs with CMOS inputs to improve interchangeability, noise immunity, compatibility, and reliability. A 2kΩ resistor is generally sufficient. CMOS inputs are compatible with CMOS logic at 5V to 15V without pull-ups. Mechanical switches require pull-up or pull-down resistors to prevent noise and contact issues. Renesas disclaims liability for misuse and emphasizes adherence to product specifications and legal regulations.
应用说明和白皮书 (5)
- EOL 通告英语PDF 200 KB PLC15033 2015年6月11日
- 产品咨询英语PDF 499 KB PA11003 2011年1月05日
- 产品咨询英语PDF 67 KB PA10098 2010年10月21日
产品通告（产品变更、EOL 等） (3)
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
