特性
- 34µA typical supply current
- 10pA typical input bias current
- 200kHz gain bandwidth product
- 2.4V to 5.5V single supply voltage range
- Rail-to-rail input and output
- Enable pin (ISL28168 only)
- Pb-free (RoHS compliant)
ISL28168_ISL28268 Functional Diagram
描述
Support is limited to customers who have already adopted these products.
The ISL28168 and ISL28268 are micro-power operational amplifiers optimized for single supply operation over a power supply range of 2. 4VDC to 5. 5VDC. These devices draw minimal supply current and operate rail-to-rail at the input and output, while providing excellent DC-accuracy, noise and output drive specifications. Competing devices seriously degrade these parameters to achieve micro-power supply current. The parts feature an Input Range Enhancement Circuit (IREC), which enables them to maintain CMRR performance for input voltages greater than the positive supply. The input signal is capable of swinging 0. 25V above the positive supply and to 100mV below the negative supply with only a slight degradation of the CMRR performance. The output operation is rail-to-rail. The 1/f corner of the voltage noise spectrum is at 100Hz. This results in low frequency noise performance, which can only be found on devices with an order of magnitude higher supply current. ISL28168 and ISL28268 can be operated from one lithium cell or two Ni-Cd batteries. The ISL28168 contains an enable pin feature that allows the device to be shutdown when not in use.
应用
- Battery- or solar-powered systems
- 4mA to 20mA current loops
- Handheld consumer products
- Medical devices
- Sensor amplifiers
- ADC buffers
- DAC output amplifiers
| Part Number | Status | Samples | Stock | Package | Lead Count (#) | Carrier Type | Pb (Lead) Free | Temp. Range (°C) |
|---|---|---|---|---|---|---|---|---|
| ISL28168FHZ-T7 | Obsolete | N/A | In Stock | SOT23 | 6# | Reel | No | -40 to +125°C |
| ISL28168FHZ-T7A | Obsolete | N/A | In Stock | SOT23 | 6# | Reel | No | -40 to +125°C |
加载中
- 应用说明英语PDF 564 KB an1993 2018年5月22日AI 生成的摘要: Voltage feedback (VFB) amplifiers use a differential input pair, a high-impedance stage, and an output buffer to convert input voltage differences into output voltage. The VFB amplifier's gain decreases at a dominant pole frequency due to compensation capacitors. Current feedback (CFB) amplifiers include a class AB input amplifier, current mirror, high-impedance stage, and output buffer. CFB amplifiers provide faster switching and higher slew rates by drawing charge/discharge currents directly from supply rails, unlike VFB amplifiers which are limited by biasing current sources.
- 应用说明英语PDF 357 KB an1694 2004年1月19日AI 生成的摘要: The document outlines the four fundamental internal blocks of an operational amplifier and presents a simple 2:1 stage circuit diagram. It includes important legal notices from Renesas Electronics regarding the use, liability, and intellectual property rights of their semiconductor products. The document clarifies product quality grades, intended applications, and restrictions on use in life-critical or hazardous systems. It emphasizes compliance with applicable laws and safety responsibilities when using Renesas products. Contact information for Renesas sales offices worldwide is also provided.
- 应用说明英语PDF 1.02 MB an1613 2004年1月19日AI 生成的摘要: The document details the process of importing SPICE netlists into Allegro Design Entry CIS for simulation. It guides users through verifying no errors during schematic translation, associating and replacing symbols for SPICE models, and mapping model pins to symbol pins. It also explains setting up new projects, creating simulation profiles, adding libraries, and configuring analysis types such as AC Sweep/Noise. The instructions emphasize selecting appropriate symbols based on pin count and ensuring all files reside in the same directory for smooth simulation setup.
- 应用说明英语PDF 556 KB an1561 2004年1月19日AI 生成的摘要: This document investigates radiated interference in audio circuits using precision amplifiers. It compares the ISL28291 bipolar input and EL5220 MOSFET input operational amplifiers across frequencies from 100kHz to 6GHz. Results show the EL5220 exhibits significantly lower interference, especially in Bluetooth frequency bands. Higher feedback resistor values and RFI capacitors reduce interference, but placing the antenna near the IC increases it. MOSFET inputs prove less susceptible to interference than bipolar types. Antenna placement and radiation patterns critically affect circuit performance in sensitive audio applications.
- 应用说明英语PDF 2.04 MB an1560 2004年1月19日AI 生成的摘要: This document explains how to accurately measure voltage and current noise in operational amplifiers down to 0.1Hz. It details the importance of setting the post amplifier gain to overcome the dynamic signal analyzer's noise floor, using external AC coupling to avoid measurement errors, and employing a Faraday cage to reduce environmental noise. It also discusses selecting the appropriate series resistor to distinguish current noise from Johnson noise and optimizing measurement algorithms to separate internal and external noise components.
- 应用说明英语PDF 976 KB an1556 2004年1月19日AI 生成的摘要: The document details building an accurate SPICE model for low noise, low power precision amplifiers, focusing on the ISL28127 device. It explains the modeling of various amplifier stages, including the voltage noise stage, input stage, gain stages, mid supply reference, common mode gain, supply isolation, and output stage. Key modeling techniques involve noise reduction, gain setting, current sourcing, and output short circuit protection. The document also describes how voltage-controlled current sources operate within the model to simulate amplifier behavior accurately.
- 应用说明英语PDF 843 KB an535 2002年6月05日AI 生成的摘要: A Data Acquisition System (DAS) requires careful design of signal conditioning, transducer selection, and signal transmission to ensure high accuracy. Signal conditioning includes multiplexing, amplification, filtering, and calibration, ideally performed near the transducer. Transducers convert physical variables to electrical signals, often voltage, with low source resistance preferred. Signal paths can be single-ended or differential; differential paths better reject common mode noise, especially for low-level signals. Shielded twisted pairs and balanced lines reduce interference. Filters, typically Butterworth low-pass, prevent aliasing and maintain signal integrity.
推荐文档 (1)
数据手册 (1)
手册和指南 (1)
- 应用说明英语PDF 564 KB an1993 2018年5月22日AI 生成的摘要: Voltage feedback (VFB) amplifiers use a differential input pair, a high-impedance stage, and an output buffer to convert input voltage differences into output voltage. The VFB amplifier's gain decreases at a dominant pole frequency due to compensation capacitors. Current feedback (CFB) amplifiers include a class AB input amplifier, current mirror, high-impedance stage, and output buffer. CFB amplifiers provide faster switching and higher slew rates by drawing charge/discharge currents directly from supply rails, unlike VFB amplifiers which are limited by biasing current sources.
- 应用说明英语PDF 357 KB an1694 2004年1月19日AI 生成的摘要: The document outlines the four fundamental internal blocks of an operational amplifier and presents a simple 2:1 stage circuit diagram. It includes important legal notices from Renesas Electronics regarding the use, liability, and intellectual property rights of their semiconductor products. The document clarifies product quality grades, intended applications, and restrictions on use in life-critical or hazardous systems. It emphasizes compliance with applicable laws and safety responsibilities when using Renesas products. Contact information for Renesas sales offices worldwide is also provided.
- 应用说明英语PDF 1.02 MB an1613 2004年1月19日AI 生成的摘要: The document details the process of importing SPICE netlists into Allegro Design Entry CIS for simulation. It guides users through verifying no errors during schematic translation, associating and replacing symbols for SPICE models, and mapping model pins to symbol pins. It also explains setting up new projects, creating simulation profiles, adding libraries, and configuring analysis types such as AC Sweep/Noise. The instructions emphasize selecting appropriate symbols based on pin count and ensuring all files reside in the same directory for smooth simulation setup.
- 应用说明英语PDF 556 KB an1561 2004年1月19日AI 生成的摘要: This document investigates radiated interference in audio circuits using precision amplifiers. It compares the ISL28291 bipolar input and EL5220 MOSFET input operational amplifiers across frequencies from 100kHz to 6GHz. Results show the EL5220 exhibits significantly lower interference, especially in Bluetooth frequency bands. Higher feedback resistor values and RFI capacitors reduce interference, but placing the antenna near the IC increases it. MOSFET inputs prove less susceptible to interference than bipolar types. Antenna placement and radiation patterns critically affect circuit performance in sensitive audio applications.
- 应用说明英语PDF 2.04 MB an1560 2004年1月19日AI 生成的摘要: This document explains how to accurately measure voltage and current noise in operational amplifiers down to 0.1Hz. It details the importance of setting the post amplifier gain to overcome the dynamic signal analyzer's noise floor, using external AC coupling to avoid measurement errors, and employing a Faraday cage to reduce environmental noise. It also discusses selecting the appropriate series resistor to distinguish current noise from Johnson noise and optimizing measurement algorithms to separate internal and external noise components.查看更多 (7)
应用说明和白皮书 (7)
产品通告（产品变更、EOL 等） (1)
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
营销资料 (1)
其他 (1)
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
加载中
筛选
当前筛选条件
软件与工具
按类型筛选
按供应商筛选
样例程序
按应用筛选
按功能筛选
按编译器筛选
按 IDE 筛选
模拟模型
Partner Solutions
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
模拟模型 (1)
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
