Lead Count (#) | 8 |
Pkg. Dimensions (mm) | 3.00 x 3.00 x 0.75 |
Pkg. Code | LPC |
Pitch (mm) | 0.65 |
Pkg. Type | TDFN |
Moisture Sensitivity Level (MSL) | 1 |
Pb (Lead) Free | Yes |
RoHS (ISL95810UIRT8Z-T) | 下载 |
ECCN (US) | |
HTS (US) |
Lead Count (#) | 8 |
Carrier Type | Reel |
Moisture Sensitivity Level (MSL) | 1 |
Resistance Options (kΩ) | 50 |
Interface | I2C |
Pkg. Dimensions (mm) | 3.0 x 3.0 x 0.75 |
Single Supply Voltage Range (V) | 0 - 5.5 |
Pb (Lead) Free | Yes |
Pb Free Category | Pb-Free 100% Matte Tin Plate w/Anneal-e3 |
Temp. Range | -40 to +85°C |
Country of Assembly | Thailand |
Country of Wafer Fabrication | Singapore |
Advanced Features | Same as ISL90810 with memory |
Channels (#) | 1 |
End-to-End Temperature Coefficient (ppm/°C) | 45 |
Length (mm) | 3 |
MOQ | 2500 |
Memory Type | Nonvolatile |
Middlepoint Ratiometric Tempco | 4 |
Pitch (mm) | 0.7 |
Pkg. Type | TDFN |
Qualification Level | Standard |
Resistance Taper | Linear |
Supply Current Icc (µA) | 5 |
Supply Voltage Vcc (Min) (V) | 2.7 |
Supply Voltage Vcc Range | 2.7 to 5.5 |
Taps (#) | 256 |
Thickness (mm) | 0.75 |
VL Terminal Voltage (Max) (V) | 5.5 |
VL Terminal Voltage (Min) (V) | 0 |
Width (mm) | 3 |
Wiper Current (mA) | 3 |
Wiper Resistance (ohms) | 70 |
The ISL95810 integrates a digitally controlled potentiometer (XDCP) on a monolithic CMOS integrated circuit. The digitally controlled potentiometer is implemented with a combination of resistor elements and CMOS switches. The position of the wiper is controlled by the user through the I2C bus interface. The potentiometer has an associated volatile Wiper Register (WR) and a non-volatile Initial Value Register (IVR), that can be directly written to and read by the user. The content of the WR controls the position of the wiper. At power-up the device recalls the contents of the DCP's IVR to the WR. The DCP can be used as three-terminal potentiometer or as two-terminal variable resistor in a wide variety of applications including control, parameter adjustments, and signal processing.