概览
描述
These MCUs are ideal for low-cost networking applications. They integrate the IT800 power line modem developed by YITRAN, which provides communication over power lines using the 120 kHz to 400 kHz (FCC, ARIB) or 20 kHz to 80 kHz (CENELEC A) or 95 kHz to 125 kHz (CENELEC B) frequency band and achieves data transfer rates of up to 7.5 kbps. The MCUs can run a software library for the Data Link Layer (layer 2 of the OSI model) for “Protocol agnostic” solution. Maximum operating frequency is 15.36 MHz when using a PLL Synthesizer. A 64-pin package is available.
产品对比
应用
设计和开发
软件与工具
软件与工具
| Software title
|
Software type
|
公司
|
|---|---|---|
| FAT File System FAT file system, Original file system
|
File System | 瑞萨电子 |
| M3T-MR30/4 Real-time OS for M16C Series and R8C Family μITRON4.0 Specification real-time OS for M32C/80, M16C/80 Series [Required IDE :High-performance Embedded Workshop]
|
ITRON OS | 瑞萨电子 |
| C/C++ Compiler Package for R8C and M16C Families C/C++ Compiler Package for R8C Family and M16C Family (R32C/M32C/M16C) , * Packed the following three compiler packages : [Content] C Compiler Package for R32C Series, C Compiler Package for M32C Series [M3T-NC308WA], and C/C++ Compiler Package for M16C Series and R8C Family [M3T-NC30WA]. They are bundled with the simulator debugger and High-performance Embedded Workshop.
|
Compiler/Assembler | 瑞萨电子 |
| MISRA C Rule Checker SQMlint MISRA C Rule Checker (option)
|
Compiler/Assembler | 瑞萨电子 |
| High-performance Embedded Workshop Renesas integrated development environment (IDE) (for SuperH, RX, R8C, M32R, M16C, H8SX, H8S, H8, and 740 families).
|
IDE and Coding Tool | 瑞萨电子 |
| Flash Development Toolkit (Programming GUI) Flash memory programming software. [Support MCU/MPU and devices: SuperH RISC engine, RX, R8C, M16C, H8SX, H8S, H8, 740]
|
Programmer (Unit/SW) | 瑞萨电子 |
| Simulator Debugger for M16C Series and R8C Family Simulator Debugger for M16C/60, M16C/30, M16C/Tiny, M16C/20, M16C/10 Series and R8C Family [Support IDE : High-performance Embedded Workshop] (Note: This product is included in Compiler Package and is not available separately.)
|
Simulator | 瑞萨电子 |
7 项目
|
||
样例程序
开发板与套件
评估
M16C/6S Evaluation Kit for PLC Communication (Non Promotion)
The R0K3306S0D000BR is only supported for existing customers. The EV10 R0K3036S1DJ01BR evaluation board is the recommended replacement for evaluating the M16C/6S1 MCU Group. This evaluation kit includes an evaluation board with the M16C/6S, a small board for connecting the emulator, and a cable....
模型
ECAD 模块
点击产品选项表中的 CAD 模型链接，查找 SamacSys 中的原理图符号、PCB 焊盘布局和 3D CAD 模型。如果符号和模型不可用，可直接在 SamacSys 请求该符号或模型。
产品选项
当前筛选条件
支持
资源
常见问题
-
用M16C闪存启动器对内部闪存编程时没有在ID代码区设值，ID代码区会写入什么？下一次重编程时要输入何值来验证ID代码？
When programming the on-chip Flash memory without setting a value in the ID code area, the M16C Flash Starter will set "FF FF FF FF FF FF FF" in the ID code area. Therefore, the next time you reprogram the Flash memory, input [all "FFh"] to verify the ID ...
2008年2月14日 -
用M16C闪存Starter对内部闪存编程写入。第一次全输入00h的ID码时OK。其后同样操作却有不匹配ID错。怎么办？
使用M16C Flash Starter输入的ID码用于与MCU的ID码进行验证，验证通过后才允许访问。MCU的ID码随内部闪存的改写而变化。因此，对内 ...
2008年2月14日 -
用M16C闪存Starter对内部闪存编程。对空白片ID码栏不输入任何值时有ID类型不匹配错而无法写入。怎么办？
M16C Flash Starter必须输入ID码。输入ID码后方可对空白片编程。对空白片而言，ID码可输入任意值。
2006年2月14日