概览
描述
The SLG47004 is an AnalogPAK™ programmable mixed-signal IC with operational amplifiers, digital rheostats, EEPROM, and a wide set of analog and digital macrocells.
SLG47004 builds upon the flexibility of the GreenPAK’s traditional mixed-signal solution by integrating a mix of advanced analog features, including op amps with programmable bandwidth, 10-bit digital rheostats, analog switches, and a chopper analog comparator. The unique Auto-Trim feature highlights the ability of this GreenPAK device to periodically tune its rheostat value to either compensate for system error sources or reconfigure circuit parameters. The SLG47004 provides dynamic Power Down control for all analog and digital blocks to optimize power consumption performance. Common applications include sensor interfaces, ADC analog front-ends, configurable amplifiers, tunable filters, and a variety of other analog circuits. This multi-time programmable solution is built into a tiny 3mm x 3mm package.
特性
- User-defined Auto-Trim procedure for two independent analog channels
- Event-triggered memory self-programming routine for digital rheostats
- In system programmability
- Multiple-time programmable memory
- Configurable Power Down option for all analog and digital macrocells
- Wide range power supply
- 2.5V (±4%) to 5V (±10%)
- Low current consumption
- Operating temperature range: -40°C to 85°C
- RoHS-compliant/Halogen-free
- Package: STQFN-24 (3.0mm x 3.0mm x 0.55mm, 0.4mm pitch)
- Macrocells Overview
- Two general-purpose op amps with configurable bandwidth
- Instrumentation amplifier mode, including a third internal op amp
- Two 10-bit 100kΩ digital rheostats with optional potentiometer mode
- Two SPST analog switches
- Three analog comparators
- Two low-power general-purpose rail-to-rail analog comparators (ACMPxL)
- One low-offset chopper comparator
- Three oscillators (OSC)
- 2.048kHz oscillator
- 2.048MHz oscillator
- 25MHz oscillator
- Thirteen combination function macrocells
- Three selectable DFF/LATCH or 2-bit LUTs
- One selectable programmable pattern generator or 2-bit LUT
- Seven selectable DFF/LATCH or 3-bit LUTs
- One selectable pipe delay or ripple counter or 3-bit LUT
- One selectable DFF/LATCH or 4-bit LUT
- Seven multi-function macrocells
- Six selectable DFF/LATCH or 3-bit LUTs + 8-bit delay/counters
- One selectable DFF/LATCH or 4-bit LUT + 16-bit delay/counter
- I2C serial communication interface
- Analog temperature sensor
- 2-kbit (256 x 8) I2C-compatible (2-wire) serial EEPROM emulation with software write protection
- Power-on Reset (POR)
- Two general-purpose op amps with configurable bandwidth
产品对比
应用
设计和开发
软件与工具
软件与工具
| Software title
|
Software type
|
公司
|
|---|---|---|
| Go Configure Software Hub Go Configure Software Hub 为各种产品提供开发支持，包括 GreenPAK 可配置混合信号矩阵和 ForgeFPGA™ 器件。
|
Software Package | 瑞萨电子 |
1 item
|
||
开发板与套件
开发
GreenPAK SLG47004 Development Kit with Socket Adapter
The SLG47004V-SKT is a socket adapter kit for use with the SLG4DVKADV GreenPAK™ Advanced Development Board or SLG4DVKLITE GreenPAK Lite Development Board. The SLG47004V-SKT kit includes the SLG4SA24AA-30x30 socket adapter and 20 SLG47004V GreenPAK programmable mixed-signal matrix IC samples.
Used...
Recommended Documents:
开发
GreenPAK SLG47004 20-Pin DIP Prototyping Board
The SLG47004V-DIP 20-pin DIP Prototyping Board is perfect for breadboarding and fast prototypes. It requires the DIP Adapter (SLG4SA-DIP) to use it with the GreenPAK™ Advanced Development Board.
Recommended Documents:
评估
GreenPAK SLG47004V Evaluation Board
The evaluation board for the SLG47004 is designed to prototype basic analog configurations of SLG47004 with user-defined parameters.
Recommended Documents:
开发
SLG4SA-DIP
有效
GreenPAK DIP Adapter for GreenPAK Advanced Development Board
The GreenPAK™ DIP Adapter for the GreenPAK Advanced Development Board allows for using the SLG46xxxV-DIP and SLG47xxxV-DIP prototyping boards with the GreenPAK Advanced Development Board. It acts as the bridge between the advanced and DIP development platforms.
Recommended Documents:
开发
SLG4DVKADV
有效
GreenPAK 高级开发板
GreenPAK 高级开发板为 GreenPAK 器件提供完整的编程、仿真和测试功能 - 适用于 SLG46xxxX-SKT / SLG47xxxV-SKT 插座套件。
它与 GreenPAK Designer 软件（内置于 Go Configure™ Software Hub 中）协同工作，并允许设计人员：
- 快速对自定义样品进行编程
- 在线测试GreenPAK项目
- 使用任 一 GreenPAK 器件进行开发
套件包含
- 高级开发板
- USB 线材
- 快速入门指南
请注意：插座适配器应单独订购
Recommended Documents:
Test this Board Remotely
该板卡已上线云上实验室（Lab on the Cloud)，使用我们的 PC 图形界面，无需实体板卡，便可在虚拟实验室中立即开始配置和测试设计。
开发
SLG4DVKGSD
有效
GreenPAK Serial Debugger Board (GSD)
GreenPAK Serial Debugger (GSD) device can be used for programming GreenPAK products with multiple-time Non-Volatile Memory (NVM) or for configuring the interconnect logic, the IOs, and the macrocells of all GreenPAK chips with I²C interface. It is very helpful in the late stages of development...
Recommended Documents:
开发
SLG4DVKLITE
有效
GreenPAK Lite 开发板
GreenPAK Lite 开发板为 GreenPAK 设备提供完整的编程、仿真和测试功能，与 Go Configure™ 软件中心配对工作。 板卡功能由瑞萨电子的 RX66T MCU 提供。
Recommended Documents:
评估
5A可编程混合信号IC负载板
QCIOT-ELOADPOCZ 负载板是用于 QuickConnect 的可编程电子负载，可在原型设计时进行系统压力测试。
该板包括SLG4BE46142V可编程混合信号 IC，用作支持 I2C 的控制器，用于选择电流负载。
该板提供标准的 Pmod™ 6A 型（扩展 I2C）连接，用于板载传感器通过匹配的连接器插入任何所需的 MCU 评估套件。 QCIOT-ELOADPOCZ在电路板的两侧都具有Pmod连接器，允许额外的6/6A型电路板以菊花链方式与同一MCU Pmod连接器上的多个器件进行连接。
QCIOT-ELOADPOCZ的原型设计是为了可编程加载的快速连接。...
Recommended Documents:
Test this Board Remotely
该板卡已上线云上实验室（Lab on the Cloud)，使用我们的 PC 图形界面，无需实体板卡，便可在虚拟实验室中立即开始配置和测试设计。
开发
GreenPAK 入门套件 Lite
SLG4DVKLITEINTRO GreenPAK™ 入门套件是非常适合给使用 GreenPAK 可编程混合信号产品的客户去启动新的开发。
GreenPAK 入门套件包括：
- 附有 USB 数据线的SLG4DVKLITE
- SLG46120V-DIP
- SLG46721V-DIP
- SLG46620V-DIP
- SLG46537V-DIP
- SLG46826V-DIP
- SLG47105V-DIP
- SLG47004V-DIP
- SLG47003V-DIP
- SLG47011V-DIP
- SLG46855V-DIP
Recommended Documents:
开发
SLG4DVKINTRO
有效
GreenPAK 入门套件
SLG4DVKINTRO GreenPAK 入门套件非常适合新客户评估。
GreenPAK 入门套件包括：
- SLG4DVKADV GreenPAK 高级开发板
- 用于GreenPAK高级开发板的SLG4SA-DIP适配器
- 以下 DIP 原型板：
- 2x SLG46120V-DIP
- 2x SLG46721V-DIP
- 2x SLG46620V-DIP
- 2x SLG46537V-DIP
- 2x SLG46826V-DIP
- 1x SLG47105V-DIP
- 1x SLG47004V-DIP
- USB 线材
Recommended Documents:
模型
ECAD 模块
点击产品选项表中的 CAD 模型链接，查找 SamacSys 中的原理图符号、PCB 焊盘布局和 3D CAD 模型。如果符号和模型不可用，可直接在 SamacSys 请求该符号或模型。
产品选项
当前筛选条件
视频和培训
LED Dimmer Demonstration Based on AnalogPAK™ SLG47004
This video demonstrates an LED dimmer using the AnalogPAK™ SLG47004.
Video List
