概览
描述
The SLG46537V/M provides a small, low-power component for commonly used mixed-signal functions. The user creates their circuit design by programming the one-time programmable (OTP) non-volatile memory (NVM) to configure the interconnect logic, the I/O pins, and the macrocells of the SLG46537V/M. This highly versatile device allows for a wide variety of mixed-signal functions to be designed within a very small, low-power single integrated circuit.
特性
- Logic and Mixed-Signal Circuits
- Highly Versatile Macrocells
- Read Back Protection (Read Lock)
- 1.8V (±5%) to 5V (±10%) Supply
- Operating Temperature Range: -40°C to 85°C
- RoHS-Compliant/Halogen-Free
- Macrocells Overview
- Four Analog Comparators (ACMP)
- Two Voltage References (Vref)
- Seventeen Combination Function Macrocells
- Three Selectable DFF/Latch or 2-bit LUTs
- One Selectable Continuous DFF/Latch or 3-bit LUT
- Four Selectable DFF/Latch or 3-bit LUTs
- One Selectable Pipe Delay or 3-bit LUT
- One Selectable Programmable Pattern Generator or 2-bit LUT
- Five 8-bit Delays/Counters or 3-bit LUTs
- Two 16-bit Delays/Counters or 4-bit LUTs
- Asynchronous State Machine
- Eight States
- Flexible Input Logic from State Transitions
- Serial Communications
- I2C Protocol Compliant
- Pipe Delay – 16 Stage/3 Output (Part of Combination Function Macrocell)
- Programmable Delay
- Additional Logic Functions – 2 Deglitch Filters with Edge Detectors
- Two Oscillators (OSC)
- Configurable 25kHz/2MHz
- 25MHz RC Oscillator
- Crystal Oscillator
- Power-On-Reset (POR)
- Eight Byte RAM + OTP User Memory
- RAM Memory Space that is Readable and Writable via I2C
- User-defined Initial Values Transferred from OTP
- Analog Temperature Sensor
产品对比
应用
设计和开发
软件与工具
软件与工具
| Software title
|
Software type
|
公司
|
|---|---|---|
| Go Configure Software Hub Go Configure Software Hub 为各种产品提供开发支持，包括 GreenPAK 可配置混合信号矩阵和 ForgeFPGA™ 器件。
|
Software Package | 瑞萨电子 |
1 item
|
||
开发板与套件
开发
GreenPAK SLG46537 (STQFN-20) Development Kit with Socket Adapter
The SLG46537V-SKT includes the SLG4SA20-20x30 socket adapter and 50 SLG46537V (STQFN-20) samples.
Recommended Documents:
开发
GreenPAK SLG46537 (STQFN-20) 20-Pin DIP Prototyping Board
The SLG46537V-DIP 20-pin DIP prototyping board is perfect for breadboarding and fast prototypes. It requires the DIP Adapter (SLG4SA-DIP) to use it with the Advanced Development Board.
Recommended Documents:
开发
GreenPAK SLG46537 （MSTQFN-20） 20 引脚 DIP 原型开发板
SLG46537M-DIP 20 引脚 DIP 板非常适合试验(面包)板和快速原型(设计评估)。 它可以搭配DIP适配器（SLG4SA-DIP）将其与高级开发板一起使用。
Recommended Documents:
开发
GreenPAK SLG46537 (MSTQFN-22) Development Kit with Socket Adapter
The SLG46537M-SKT includes the SLG4SA22-20x22 socket adapter and 50 SLG46537M (MSTQFN-22) samples.
Recommended Documents:
开发
SLG4DVKADV
有效
GreenPAK 高级开发板
GreenPAK 高级开发板为 GreenPAK 器件提供完整的编程、仿真和测试功能 - 适用于 SLG46xxxX-SKT / SLG47xxxV-SKT 插座套件。
它与 GreenPAK Designer 软件（内置于 Go Configure™ Software Hub 中）协同工作，并允许设计人员：
- 快速对自定义样品进行编程
- 在线测试GreenPAK项目
- 使用任 一 GreenPAK 器件进行开发
套件包含
- 高级开发板
- USB 线材
- 快速入门指南
请注意：插座适配器应单独订购
Recommended Documents:
Test this Board Remotely
该板卡已上线云上实验室（Lab on the Cloud)，使用我们的 PC 图形界面，无需实体板卡，便可在虚拟实验室中立即开始配置和测试设计。
开发
SLG4SA-DIP
有效
GreenPAK DIP Adapter for GreenPAK Advanced Development Board
The GreenPAK™ DIP Adapter for the GreenPAK Advanced Development Board allows for using the SLG46xxxV-DIP and SLG47xxxV-DIP prototyping boards with the GreenPAK Advanced Development Board. It acts as the bridge between the advanced and DIP development platforms.
Recommended Documents:
演示
GreenPAK Keypad Scanner Demonstration Board
The SLG4KPDSC-DMO is a keypad scanner demonstration board.
Using an MCU or SoC to scan a keypad is a less than ideal solution for human input. It often makes sense to offload keypad scanning to a dedicated IC to reduce the power and I/O burden on larger, less efficient, and more expensive...
Recommended Documents:
开发
SLG4DVKLITE
有效
GreenPAK Lite 开发板
GreenPAK Lite 开发板为 GreenPAK 设备提供完整的编程、仿真和测试功能，与 Go Configure™ 软件中心配对工作。 板卡功能由瑞萨电子的 RX66T MCU 提供。
Recommended Documents:
开发
SLG4DVKINTRO
有效
GreenPAK 入门套件
SLG4DVKINTRO GreenPAK 入门套件非常适合新客户评估。
GreenPAK 入门套件包括：
- SLG4DVKADV GreenPAK 高级开发板
- 用于GreenPAK高级开发板的SLG4SA-DIP适配器
- 以下 DIP 原型板：
- 2x SLG46120V-DIP
- 2x SLG46721V-DIP
- 2x SLG46620V-DIP
- 2x SLG46537V-DIP
- 2x SLG46826V-DIP
- 1x SLG47105V-DIP
- 1x SLG47004V-DIP
- USB 线材
Recommended Documents:
开发
GreenPAK 入门套件 Lite
SLG4DVKLITEINTRO GreenPAK™ 入门套件是非常适合给使用 GreenPAK 可编程混合信号产品的客户去启动新的开发。
GreenPAK 入门套件包括：
- 附有 USB 数据线的SLG4DVKLITE
- SLG46120V-DIP
- SLG46721V-DIP
- SLG46620V-DIP
- SLG46537V-DIP
- SLG46826V-DIP
- SLG47105V-DIP
- SLG47004V-DIP
- SLG47003V-DIP
- SLG47011V-DIP
- SLG46855V-DIP
Recommended Documents:
开发
SLG4DVKGSD
有效
GreenPAK Serial Debugger Board (GSD)
GreenPAK Serial Debugger (GSD) device can be used for programming GreenPAK products with multiple-time Non-Volatile Memory (NVM) or for configuring the interconnect logic, the IOs, and the macrocells of all GreenPAK chips with I²C interface. It is very helpful in the late stages of development...
Recommended Documents:
模型
ECAD 模块
点击产品选项表中的 CAD 模型链接，查找 SamacSys 中的原理图符号、PCB 焊盘布局和 3D CAD 模型。如果符号和模型不可用，可直接在 SamacSys 请求该符号或模型。
产品选项
当前筛选条件
视频和培训
GreenPAK I2C
Video List
