特性
- The RAA730500 is a monolithic programmable analog IC with a range of on-chip circuits
- On-chip configurable amplifier x 3 ch
- On-chip synchronous detection amplifier x 1 ch
- On-chip general-purpose operational amplifier x 1 ch
- On-chip low-pass filter x 1 ch
- On-chip high-pass filter x 1 ch
- On-chip D/A converter x 4 ch
- On-chip variable output voltage regulator x 1 ch
- On-chip reference voltage generator x 1 ch
- On-chip temperature sensor x 1 ch
- On-chip SPI x 1 ch
- Includes a low-current mode
- Operating voltage range: 3.0 V ≤ VDD ≤ 5.5 V
- Operating temperature range: -40°C ≤ TA ≤ 105°C
- Package: 48-pin plastic LQFP (fine pitch) (7 x 7)
Smart-Analog-IC500 Block Diagram
描述
Smart Analog IC500 has a built-in configurable amplifier, synchronous detection amplifier, D/A converter, low-pass filter and high-pass filter. It is suitable for home appliances, industrial applications and healthcare equipment.
The RAA730500 is a monolithic programmable analog IC with a range of on-chip circuits such as configurable amplifiers, a synchronous detection amplifier, a general-purpose operational amplifier, D/A converters, and a temperature sensor, allowing the RAA730500 to be used as an analog front-end device for processing minute sensor signals. The RAA730500 uses a Serial Peripheral Interface (SPI) to allow external devices to control each on-chip circuit, enabling a more compact package and a reduction in the number of control pins. The compact package used by the RAA730500—a 48-pin LQFP—in turns enables a more compact set design.
应用
- Home appliances
- Industrial applications
- Healthcare equipment
| Part Number | Status | Samples | Stock | RoHS | Package | Lead Count (#) | Pb (Lead) Free | Temp. Range (°C) |
|---|---|---|---|---|---|---|---|---|
| RAA730500CFP#AC0 | Obsolete | N/A | In Stock | RoHS:EN RoHS:JA | LFQFP | 48# | Yes | -40 to +105 |
| RAA730500DFP#AC0 | Obsolete | N/A | Out of Stock | RoHS:EN RoHS:JA | LFQFP | 48# | Yes | -40 to +105 |
加载中
请登录后开启订阅
- 指南英语PDF 222 KB smartanalog-product-number-guide 2018年4月04日
- 数据手册英语RAA730500 Monolithic Programmable Analog ICRECOMMENDED
- 应用说明英语AI 生成的摘要: This section lists the required components for development using the TSA-IC500 evaluation board, including the Smart Analog IC 500 and RL78/G1A microcontroller. It specifies the need for the Renesas E1 on-chip debugging emulator, New Japan Radio phototransistor NJL7502L as a sensor, LEDs for status indication, and resistors for LED current control. It also details how to obtain the TSA-IC500 board and the E1 emulator through distributors or online sources.
- 应用说明英语AI 生成的摘要: The document explains the sensing mechanism and characteristics of temperature transducer ICs, focusing on the AD592ANZ. It details how the IC outputs a current proportional to temperature and behaves as a high-impedance constant current source. The amplifier configuration selection flowchart guides choosing the appropriate amplifier, with a non-inverting amplifier (configuration 6) selected for this sensor due to its current output. An example connection of Smart Analog IC 500 to the AD592ANZ using a 1 kΩ load resistor converts the current output to voltage for measurement.
- 应用说明英语AI 生成的摘要: The document explains the sensing mechanism of photodiodes, focusing on the Si PIN photodiode S6036 by Hamamatsu Photonics. It details the photodiode's electrical characteristics, such as spectral response and photo sensitivity. The selection of a transimpedance amplifier (configuration 5) is justified based on the photodiode’s current output and system requirements. It also describes how to connect the photodiode to the Smart Analog IC 500, specifying the anode to ground and cathode to the amplifier’s inverted input.
- 应用说明英语AI 生成的摘要: The document explains the sensing mechanism of Hall elements, which convert magnetic fields into voltage using the Hall effect. It details the characteristics of the HW-300B Hall element, including output voltage, input/output resistance, and offset voltage. The document describes selecting an instrumentation amplifier (configuration 4) for the Hall element based on its differential voltage output. It also provides an example of connecting the Hall element to the Smart Analog IC 500, including voltage regulation and offset cancellation using a diode and DAC.
- 应用说明英语AI 生成的摘要: The document explains the sensing mechanism and characteristics of the KG0823 MR sensor, which changes resistance based on magnetic field intensity. It details selecting a differential amplifier configuration for the sensor, emphasizing voltage output and high input impedance to match sensor specifications. An example connection of the Smart Analog IC 500 to the MR sensor is provided, showing how the sensor output connects to the configurable amplifier input for signal amplification and offset voltage cancellation.
- 应用说明英语AI 生成的摘要: The document explains the sensing mechanism of pyroelectric infrared motion sensors, focusing on the RE200B sensor's characteristics such as sensitivity, signal output, and supply voltage. It details the selection of a differential amplifier (configuration 2) for signal amplification, requiring a gain of at least 21 dB due to the sensor's output. The connection of the Smart Analog IC 500 to the sensor is illustrated, emphasizing the use of the non-inverted input pin for the amplifier and noting the importance of filtering the power supply line.
- 应用说明英语AI 生成的摘要: The document explains the sensing mechanism of vibrating gyro sensors, focusing on the ENC-03RC-R sensor by Murata Manufacturing. It details how the Coriolis force causes voltage output proportional to angular velocity. The sensor’s key specifications include a 30.8 kHz oscillation frequency, ±300 deg/sec detection range, and 0.67 mV/deg/sec sensitivity. A non-inverting amplifier configuration is selected for signal amplification based on the sensor’s voltage output range and system requirements. The connection of the Smart Analog IC 500 to the gyro sensor uses the non-inverted input pin with a D/A converter providing reference voltage.
- 应用说明英语AI 生成的摘要: The document outlines a procedure for evaluating sensors connected to Smart Analog ICs, starting from system requirement checks to amplifier configuration and sensor connection using GUI software. It lists various sensor types compatible with Smart Analog IC 500, detailing their physical detection targets and output signal types, such as voltage, current, and resistance change. Sensors outputting non-voltage/current signals require external conversion before connection. Examples include piezoresistive sensors converted via resistor dividers. Proper amplifier configuration depends on identifying the sensor's output signal type.
- 应用说明英语AI 生成的摘要: The hardware setup for sensor evaluation using Smart Analog Easy Starter requires a sensor board, evaluation board, computer, and USB cable. Power can come from USB or an external supply, with external power recommended to reduce noise. The sensor output is amplified and A/D converted by Smart Analog IC and RL78/G1A, then sent to the computer via USB for display. Software setup involves launching Easy Starter, detecting the virtual serial port, and configuring analog circuit parameters in the Chip Config window.
- 应用说明英语AI 生成的摘要: The document outlines the development procedure for Smart Analog Systems using SA-Designer with the RX family. It details the hardware setup including the GR-SAKURA evaluation board and RX63N Smart Analog IC, and the software environment comprising SA-Designer and CubeSuite+. The development process involves designing the analog front-end circuit, programming source codes for system operation, registering circuit data into CubeSuite+, and performing operation checks using an emulator. Instructions for starting SA-Designer and creating new circuit designs are also provided.
- 传单英语
- 数据手册英语RAA730500 Monolithic Programmable Analog ICRECOMMENDED
推荐文档 (1)
- 数据手册英语RAA730500 Monolithic Programmable Analog ICRECOMMENDED
数据手册 (1)
- 指南英语PDF 222 KB smartanalog-product-number-guide 2018年4月04日
手册和指南 (1)
- 应用说明英语AI 生成的摘要: This section lists the required components for development using the TSA-IC500 evaluation board, including the Smart Analog IC 500 and RL78/G1A microcontroller. It specifies the need for the Renesas E1 on-chip debugging emulator, New Japan Radio phototransistor NJL7502L as a sensor, LEDs for status indication, and resistors for LED current control. It also details how to obtain the TSA-IC500 board and the E1 emulator through distributors or online sources.
- 应用说明英语AI 生成的摘要: The document explains the sensing mechanism and characteristics of temperature transducer ICs, focusing on the AD592ANZ. It details how the IC outputs a current proportional to temperature and behaves as a high-impedance constant current source. The amplifier configuration selection flowchart guides choosing the appropriate amplifier, with a non-inverting amplifier (configuration 6) selected for this sensor due to its current output. An example connection of Smart Analog IC 500 to the AD592ANZ using a 1 kΩ load resistor converts the current output to voltage for measurement.
- 应用说明英语AI 生成的摘要: The document explains the sensing mechanism of photodiodes, focusing on the Si PIN photodiode S6036 by Hamamatsu Photonics. It details the photodiode's electrical characteristics, such as spectral response and photo sensitivity. The selection of a transimpedance amplifier (configuration 5) is justified based on the photodiode’s current output and system requirements. It also describes how to connect the photodiode to the Smart Analog IC 500, specifying the anode to ground and cathode to the amplifier’s inverted input.
- 应用说明英语AI 生成的摘要: The document explains the sensing mechanism of Hall elements, which convert magnetic fields into voltage using the Hall effect. It details the characteristics of the HW-300B Hall element, including output voltage, input/output resistance, and offset voltage. The document describes selecting an instrumentation amplifier (configuration 4) for the Hall element based on its differential voltage output. It also provides an example of connecting the Hall element to the Smart Analog IC 500, including voltage regulation and offset cancellation using a diode and DAC.
- 应用说明英语AI 生成的摘要: The document explains the sensing mechanism and characteristics of the KG0823 MR sensor, which changes resistance based on magnetic field intensity. It details selecting a differential amplifier configuration for the sensor, emphasizing voltage output and high input impedance to match sensor specifications. An example connection of the Smart Analog IC 500 to the MR sensor is provided, showing how the sensor output connects to the configurable amplifier input for signal amplification and offset voltage cancellation.查看更多 (10)
应用说明和白皮书 (10)
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
- 传单英语
营销资料 (2)
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
加载中
筛选
当前筛选条件
软件与工具
按类型筛选
按供应商筛选
样例程序
按应用筛选
按功能筛选
按编译器筛选
按 IDE 筛选
模拟模型
Partner Solutions
- 电路设计工具英语Smart Analog Easy Starter is a GUI evaluation tool for designing the analog front-end circuit of Smart Analog devices.
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
- 电路设计工具英语Smart Analog Easy Starter is a GUI evaluation tool for designing the analog front-end circuit of Smart Analog devices.
软件与工具 (1)
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
No Results Found.
检查拼写
确保所有关键词拼写正确。
确保所有关键词拼写正确。
调整关键词
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
查看筛选器
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
如果您使用了筛选器，请考虑取消选择某些筛选器选项以扩大搜索结果。
需要帮助？
- 搜索我们丰富的知识库，帮助您解答常见问题
- 前往支持论坛，获取瑞萨电子技术专家和社群的帮助
