概览
描述
RL78/G1D microcontrollers support Bluetooth® Low Energy and realized the lowest level of current consumption in the industry at 4.3mA RF transmission current (0dBm output) and 3.5mA RF receiving current. Since circuit elements necessary for connecting an antenna are built in, not only does this simplify circuit design for the antenna connection, but it also helps reduce the cost of the end product because external parts are not needed. The RL78/G1D module contains the RL78/G1D, a 32MHz crystal resonator for the RF chip, and an antenna, all in a compact (8.95mm x 13.35mm x 1.7mm) module. Moreover, the module inherits the functional pins of the RL78/G1D, so not only can you use it for modem configuration, but you can also leverage the strengths of the microcontroller for embedded configuration. The module has obtained Radio Law (Japan, FCC, IC, and CE) and Bluetooth SIG certification.
特性
- CPU: RL78 Core, Max. 32MHz
- Voltage: 1.6V to 3.6V
- Package: 48-pin HWQFN
- Memory: SRAM Max. 20KB, Program Flash Max. 256KB
- Timer: 16-bit Timer (ch) x 8, 8-bit Timer (ch) x 8, Watchdog Timer (ch) x 1, 12-bit Interval Timer x 1 ch
- PWM: PWM Output x 7
- Analog Function: 10-bit A/D Converter (ch) x 8
- On-chip Oscillator Freq. (MHz): High-Speed: 32, 24, 16, 12, 8, 4, 1MHz
Low-speed: 15kHz - Others: RTC, Power-On Reset, Low Voltage Detection
产品对比
应用
设计和开发
支持
常见问题
-
另售的 RL78/G1D BLE Module Expansion Board（P/N: RTKYRLG1D0B00000BJ）也可以使用吗？
不能使用。RL78/G1P 为 ROM:16KB、RAM:1.5KB，因此不满足控制通信协议用的软件实施推荐条件。
2020年6月17日 -
RL78/G1D: 与完成配对的远程设备连接
使用 RBLE_GAP_Create_Connection 函数与远程设备建立链接。 RBLE_GAP_Create_Connection 函数的链接建立请求将持续到通知链接建立事件 RBLE_GAP_EVENT_CONNECTION_COMP 或请求 ...
2021年3月4日 -
RL78/G1D: 创建自定义配置文件的参考文档
以下文档都是关于创建自定义配置文件正确的资源： Bluetooth® Low Energy Protocol Stack User's Manual (R01UW0095)https://www.renesas.com/document/man/bluetooth-low-energy-protocol-stack-users-manual7 ...
2021年11月16日
视频和培训
Wireless communication IC for Bluetooth Low energy and Sub-GHz by using RL78 and pre-amplifier