概览
描述
The SLG46531 provides a small, low power component for commonly used mixed-signal functions. The user creates their circuit design by programming the one time Non-Volatile Memory (NVM) to configure the interconnect logic, the I/O Pins and the macro cells of the SLG46531. This highly versatile device allows a wide variety of mixed-signal functions to be designed within a very small, low power single integrated circuit.
特性
- Logic & Mixed Signal Circuits
- Highly Versatile Macro Cells
- Read Back Protection (Read Lock)
- 1.8 V (±5%) to 5 V (±10%) Supply
- Operating Temperature Range: -40°C to 85°C
- RoHS Compliant / Halogen-Free
Macrocells Overview
- Four Analog Comparators (ACMP);
- Two Voltage References (Vref);
- Seventeen Combination Function Macrocells:
- Three Selectable DFF/Latch or 2-bit LUTs;
- One Selectable Continuous DFF/Latch or 3-bit LUT;
- Four Selectable DFF/Latch or 3-bit LUTs;
- One Selectable Pipe Delay or 3-bit LUT;
- One Selectable Programmable Function Generator or 2-bit LUT;
- Five 8-bit delays/counters or 3-bit LUTs;
- Two 16-bit delays/counters or 4-bit LUTs;
- Asynchronous State Machine:
- Eight States;
- Flexible input logic from state transitions;
- Serial Communications:
- I2C Protocol compliant;
- Pipe Delay - 16 stage/3 output (Part of Combination Function Macrocell);
- Programmable Delay;
- Additional Logic Functions - 2 Deglitch Filters with Edge Detectors;
- Two Oscillators (OSC):
- Configurable 25 kHz/2 MHz;
- 25MHz Ring Oscillator;
- Crystal Oscillator;
- Eight Byte RAM + OTP User Memory:
- RAM Memory space that is readable and writeable via I2C;
- User defined initial values transferred from OTP.
产品对比
应用
设计和开发
开发板与套件
GreenPAK GPIO Expander Demonstration Board
The SLG4IOEXP-DMO is a GPIO expander demonstration board. Many programmable mixed-signal products include an I2C block which makes these components perfect for a GPIO expander allowing you to add new features, logic, timing, and sensing to already highly integrated designs.
模型
ECAD 模块
点击产品选项表中的 CAD 模型链接,查找 SamacSys 中的原理图符号、PCB 焊盘布局和 3D CAD 模型。如果符号和模型不可用,可直接在 SamacSys 请求该符号或模型。

产品选项
当前筛选条件