跳转到主要内容

特性

  • Integrated 1.3A Continuous IDS nFET Load Switch
  • Integrated Low RDSON nFET switch: 70mΩ
  • Input Voltage: 2.5V to 5.5V
  • Operating Temperature: -40 °C to 85 °C
  • Resistor-adjustable Active Current Limit
  • ±10% accuracy for 0.2A to 1.5A Current Limit) Thresholds
  • ±15% accuracy for 0.15A to 0.2A Current Limit Thresholds
  • Open Drain FLT Signaling
  • Output OVP Protection
  • Absolute VOUT maximum voltage rating: 28VDC
  • Over-temperature Protection
  • Under-Voltage Lockout
  • True Reverse-Current Blocking

描述

The SLG59H1341C is a self-powered, high-performance 70mΩ nFET load switch designed for high-side power rail applications up to 1.3A. When ON, its internal reverse-current protection quickly opens the switch if a reverse-voltage condition is detected (VOUT > VIN + 50mV). When OFF, an internal back-to-back reverse-current blocking circuit prevents reverse path leakage current.

产品参数

属性
FET Pass Device TypeSingle N-Channel
VIN Channel 1 min. (V)2.5
VIN Channel 1 max. (V)5.5
RDSON (Typ) Channel 1 (mΩ)70
IDS Channel 1 (A)1.3
EnableActive High
Output Voltage Slew Rate set byInternally Fixed
Discharge CircuitNo
Undervoltage ProtectionYes
Over Voltage ProtectionYes
Power Good (PG), FAULT indicatorFAULT
Reverse current blockingYes
Reverse voltage detectionYes
Over Current Protection (OCP)Adjustable
Over Current Protection Setting Range Channel 10.16 - 1.62
Short Circuit ProtectionNo
Over Temperature Protection (OTP)Yes
Current Monitor OutputNo
Internal TVS Surge ProtectionNo
Temp. Range (°C)-40 to +85°C

封装选项

Pkg. TypePkg. Dimensions (mm)Lead Count (#)
WLCSP-91.21 x 1.21 mm9

应用方框图

This SoM block diagram is based on an Arm Cortex-A55 and dual Cortex-M33 MPU and consists of a versatile OSM carrier board and a compatible OSM module.
Arm Cortex-A55 和双核 Cortex-M33 MPU OSM SoM
这款基于Arm Cortex-A55 和双核 Cortex-M33 MPU 的 SoM 简化了底板开发,降低了成本,并最大限度地减少了设计风险。

其他应用

  • Fast turn on/off power rail switching
  • Frequent wake & sleep power cycle
  • Mobile devices and portable devices

当前筛选条件