封装信息
| Pkg. Type: | |
| Pkg. Code: | |
| Lead Count (#): | 8 |
| Pkg. Dimensions (mm): | |
| Pitch (mm): |
环境和出口类别
| Pb (Lead) Free | |
| Moisture Sensitivity Level (MSL) | |
| ECCN (US) | |
| HTS (US) |
产品属性
| Lead Count (#) | 8 |
| Current Monitor Output | No |
| Discharge Circuit | Yes |
| Enable | Active High |
| FET Pass Device Type | Dual P-Channel |
| IDS (A) | 2 |
| Internal TVS Surge Protection | No |
| Output Voltage Slew Rate set by | No |
| Over Current Protection (OCP) | No |
| Over Temperature Protection (OTP) | No |
| Over Voltage Protection | No |
| Parametric Category | Load Switches |
| Power Good (PG), FAULT indicator | No |
| Power Monitor Output | No |
| Protection Features | RCB, RVD |
| RDSON (Typ) (mΩ) | 45 |
| Ramp Control | No |
| Reverse current blocking | No |
| Reverse voltage detection | No |
| Short Circuit Protection | No |
| Undervoltage Protection | No |
| VD/VIN (Max) | 5.5 |
| VD/VIN (Min) | 1.5 |
| VIN Channel 1 max. (V) | 5.5 |
| VIN Channel 1 min. (V) | 1.5 |
| VIN Range (V) | 1.5 - 5.5 |
| VIN max. (V) | V5.5 |
| VIN min. (V) | V1.5 |
| 已发布 | Yes |
有关 SLG59M1638V 的资源
描述
The SLG59M1638V is a dual‑channel, 45 mΩ PMOS load switch designed to switch 1.5 to 5.5 V power rails up to 2 A in each channel. When either channel is enabled, reverse-current protection will quickly open the switch in the event of a reverse‑voltage condition is detected (a VOUT > VIN + 50 mV condition opens the switch). In the event that the channel’s VIN voltage is too low, the power switch also contains an internal UVLO threshold monitor to keep or to turn the switch OFF. For fast load turnoff when either switch is disabled (ONx = HIGH‑to‑LOW), each channel has its own fast discharge transistor that connects an internal 150 Ω RDSON transistor to ground. Each power switch is independently controlled via its own low‑voltage compatible CMOS input. Designed to operate over a -40 °C to 85 °C range, the SLG59M1638V is available in a RoHS‑compliant, ultra-small 1.6 mm x 1.0 mm STDFN package.