跳转到主要内容
Digitally Controlled Potentiometer (XDCP™)

封装信息

Pkg. Code MRK
Pitch (mm) 0.65
Lead Count (#) 8
Pkg. Type MSOP
Pkg. Dimensions (mm) 3.0 x 3.0 x 0.85

环境和出口类别

Moisture Sensitivity Level (MSL) 2
ECCN (US) EAR99
HTS (US) 8542390001
RoHS (X9315TMIZ) 下载
Pb (Lead) Free Yes

产品属性

Carrier Type Tube
Moisture Sensitivity Level (MSL) 2
Country of Assembly Thailand
Country of Wafer Fabrication United States
Price (USD) | 1ku 4.80075
Channels (#) 1
End-to-End Temperature Coefficient (ppm/°C) 300
Interface 3-Wire (Up/Down)
Lead Count (#) 8
Length (mm) 3
MOQ 960
Memory Type Nonvolatile
Middlepoint Ratiometric Tempco 20
Pb (Lead) Free Yes
Pb Free Category Pb-Free 100% Matte Tin Plate w/Anneal-e3
Pitch (mm) 0.7
Pkg. Dimensions (mm) 3.0 x 3.0 x 0.00
Pkg. Type MSOP
Qualification Level Standard
Resistance Options (kΩ) 100
Resistance Taper Linear
Single Supply Voltage Range (V) 0 - 5.5
Supply Current Icc (µA) 1
Supply Voltage Vcc (Min) (V) 2.7
Supply Voltage Vcc Range 2.7 to 5.5
Taps (#) 32
Temp. Range -40 to +85°C
Thickness (mm) 0
VL Terminal Voltage (Max) (V) 5.5
VL Terminal Voltage (Min) (V) 0
Width (mm) 3
Wiper Current (mA) 3.75
Wiper Resistance (ohms) 200

描述

The Intersil X9315 is a digitally controlled potentiometer (XDCP). The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by a 3-wire interface. The potentiometer is implemented by a resistor array composed of 31 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The position of the wiper can be stored in nonvolatile memory and then be recalled upon a subsequent power-up operation. The device can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide variety of applications.