跳转到主要内容
Digitally Controlled Potentiometer (XDCP™)

封装信息

Pkg. Code EXA
Pitch (mm) 2.54
Lead Count (#) 8
Pkg. Type PDIP
Pkg. Dimensions (mm) 9.52 x 6.35 x 3.30

环境和出口类别

Moisture Sensitivity Level (MSL) Not Applicable
ECCN (US) EAR99
RoHS (X9C103PZ) 下载
Pb (Lead) Free Yes
HTS (US)

产品属性

Carrier Type Tube
Moisture Sensitivity Level (MSL) Not Applicable
Advanced Features Integrated charge pump to allow for single supply to swing -5.5V to 5.5V
Channels (#) 1
End-to-End Temperature Coefficient (ppm/°C) 300
Interface 3-Wire (Up/Down)
Lead Count (#) 8
Length (mm) 9.5
MOQ 800
Memory Type Nonvolatile
Middlepoint Ratiometric Tempco 20
Pb (Lead) Free Yes
Pb Free Category Pb-Free 100% Matte Tin Plate w/Anneal-e3
Pitch (mm) 2.5
Pkg. Dimensions (mm) 9.5 x 6.3 x 3.30
Pkg. Type PDIP
Qualification Level Standard
Resistance Options (kΩ) 10
Resistance Taper Linear
Single Supply Voltage Range (V) 0 - 5.5
Supply Current Icc (µA) 750
Supply Voltage Vcc (Min) (V) 4.5
Supply Voltage Vcc Range 4.5 to 5.5
Taps (#) 100
Temp. Range 0 to +70°C
Thickness (mm) 3.3
VL Terminal Voltage (Max) (V) 5
VL Terminal Voltage (Min) (V) -5
Width (mm) 6.3
Wiper Current (mA) 4.4
Wiper Resistance (ohms) 40

描述

The X9C102, X9C103, X9C104, X9C503 are Intersil's digitally controlled (XDCP) potentiometers. The device consists of a resistor array, wiper switches, a control section, and non-volatile memory. The wiper position is controlled by a three-wire interface. The potentiometer is implemented by a resistor array composed of 99 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The position of the wiper can be stored in non-volatile memory and then be recalled upon a subsequent power-up operation. The device can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide variety of applications ranging from control to signal processing to parameter adjustment.