特性
- Inductive principle
- Rotation sensing up to a full turn of 360º
- SENT output with programmable limits
- Overvoltage, reverse polarity, ESD and short circuit protection
- 12-bit resolution
- Power or ground loss detection
- Facilitates redundant design requirements
- Programmable linearity correction
- Adaptive gain control supporting a wide range of coil designs
- Diagnostic features supporting ISO26262
- Supporting up to ASIL-B
- Overvoltage and reverse polarity protection up to ±18V
- Small 14-TSSOP package
描述
The ZMID5203 is an inductive position sensor IC with SENT output, used for absolute rotary and linear motion sensing in automotive applications. The ZMID5203 uses the physical principles of induction in a wire loop and Eddy currents to detect the position of a metallic target that is sliding or rotating above a set of coils, consisting of one transmitter coil and two receiver coils. The three coils are typically printed as copper traces on a printed circuit board (PCB). They are arranged such that the transmitter coil induces a secondary voltage in the receiver coils which depends on the position of the metallic target above the coils. After demodulating and processing the secondary voltages from the receiver coils, a signal representative of the metallic target’s position over the coils is obtained. The ZMID5203 is fully qualified to automotive standards AEC-Q100, grade 0 up to 150°C ambient temperature.
支持社区
-
关于使用EVKIT软件识别ZMID5203时，点击connect时，显示Could not initialize the device(无法初始化设备)的问题
Hi, Would you please give us some information about your company, contact and application? We will then get more infor and support this issue. Best regards, [email protected]
2023年8月16日
