概述
描述
高压大功率充电器是支持电池组解决方案的功能模块。 这款充电器的适用输入范围为 120V 到 240VAC。 功率因数校正(PFC)阶段可将信号提升到 400VDC,保证各种输入电压的稳定。 在 PFC 交错导通模式的强化下,它不仅可以提高效率,还充分减少了 PFC 控制器的占用空间,非常适合用于实现高效紧凑的功率传输。
系统优势:
- 交错 PFC 控制:减少占用空间并提高效率
- 零电压开关(ZVS)控制器
- 次级控制和反馈
- 纯硬件方案使用简单,无需编程
- 可通过 MOSFET 和无源组件进行轻松配置,以调节电压、电流和功率
远程测试该板卡
该板卡已上线云上实验室(Lab on the Cloud),使用我们的 PC 图形界面,无需实体板卡,便可在虚拟实验室中立即开始配置和测试设计。
Buck Converter
产品
PFC Controller
The power factor correction (PFC) controller regulates the interleaved boost stage to maintain a ~400VDC bus while supporting high efficiency and power factor across the AC input range.
产品
LDO
产品
Optically Coupled Isolation Amplifier
产品
Photocoupler
The photocouplers provide isolated feedback between the secondary and primary sides, supporting stable closed-loop regulation while maintaining electrical isolation.
产品
FET Drivers
产品
Photocoupler/Optocoupler
产品
Gate Driver
The gate drivers provide high-current gate drive for the power MOSFETs, enabling efficient switching in the PFC and full-bridge power stages.
产品
Exiting Interactive Block Diagram