Renesas RX72M networking solutions, which reduce the development time when using RX72M for slave equipment for industrial networks, are available for motor drives at robot terminals, small programable logic controllers (PLCs) and remote I/O, etc.
The solution consists of an RX72M-based evaluation board along with sample software for the OS, middleware and industrial network communication protocols supporting about 70% of the major industrial network communication protocols in the market, which strengthens our competitiveness in the development of our customers' products.
Please be sure to try out the performance and functionality of this solution.
图像
TS-RX72M-COM: TESSERA TECHNOLOGY INC.
图像
RX72M Single-Chip Motor Control via EtherCAT Communications
图像
Key Features
- You can try using industrial network communication immediately with the sample program and evaluation board.
- It has been tested for conformance with the three major protocols (EtherCAT, PROFINET RT and EtherNet/IP).
- We work with proven partners preparing major industrial network protocols in addition to EtherCAT.
图像
Detail
The following are provided for RX72M industrial network solutions:
- Hardware (RX72M Evaluation Board)
- Renesas Starter Kit+ for RX72M (manufactured by Renesas): Easy to start for full evaluation (Motor + Network) through integrated Development environment.
- Made by TESSERA TECHNOLOGY INC. /without a CE mark (Tesera direct sales, catalog Disti): Easy to start for Network evaluation and EtherCAT conformance test.
- Software: RX72M Group Communications Board Sample program Package Rev.1.10 (ZIP | English, 日本語)
- RX72M compatible drivers
- OS and middleware sample program
- Industrial network communication protocol sample program
- Application Notes: RX72M Group Communications Board Sample program Package Rev.1.10 (PDF | English, 日本語)
- Others
- Software & Tools
- The sample code for all protocols can be downloaded here:
- Project for RX72M: RX72M Group Communications Board Sample program Package Rev.1.10 (ZIP | English, 日本語)
- Supported protocols: EtherCAT, OPC UA, PROFINET RT, EtherNet/IP, Modbus TCP, CC-Link IE TSN, PROFIBUS DP, Modbus RTU/ASCII, CAN open, DeviceNet
- Communication protocol sales and support from each partner
- Status of protocol support for slave equipment
- Industrial Ethernet: EtherCAT, OPC UA, PROFINET RT, EtherNet/IP, Modbus TCP, CC-Link IE TSN
图像
- Fieldbus communication: PROFIBUS DP, Modbus RTU/ASCII, CAN open, DeviceNet
图像
Related Links
文档
|
|
|
|
|---|---|---|
| 类型 | 文档标题 | 日期 |
| 应用说明 |
PDF
2.27 MB
日本語
This application note describes a sample program of a slave device applied to semiconductor manufacturing equipment in EtherCAT® communication, which is one of the industrial Ethernet communication protocols. This application note mainly describes the firmware update function (ETG.5003.2) using the File Access over EtherCAT (FoE) protocol.
|
|
| 手册 - 硬件 |
PDF
3.22 MB
日本語
This reference guide introduces a demo system for a 2-axis robot arm using 2-phase stepper motors with resolvers, built around Renesas microcontrollers (RX24T, RX72M) and resolver ICs (RAA3064002GFP/RAA3064003GFP). It covers hardware setup, software features, tuning procedures, and safety precautions.
|
|
| 应用说明 |
PDF
1.41 MB
日本語
AI 生成的摘要:
The RX72M Communication Board facilitates EtherCAT communication for industrial network evaluation using the RX72M microcontroller. It operates at 240 MHz with 4 MB code flash and supports multiple boot modes. The board connects via Ethernet and JTAG, powered by DC 5 V through a DC jack or USB. Development requires CCRX compiler, e2Studio IDE, and EtherCAT Slave Stack Code. The manual details setup, programming, debugging, and integration with TwinCAT software for real-time control and network scanning.
|
|
| 应用说明 |
PDF
1.63 MB
日本語
AI 生成的摘要:
Modbus communication on the RX72M communication board supports Ethernet-based Modbus TCP, RS-485 serial Modbus RTU, and Modbus ASCII protocols. It enables development of Modbus RTU/ASCII master and slave, Modbus TCP server, and gateway applications. The stack supports nine key Modbus function codes for reading and writing coils and registers. The environment requires RX72M board with RXv3 CPU at 240 MHz, 3.3 V operation, and e2Studio IDE with CC-RX compiler. Sample programs and setup procedures facilitate quick evaluation and implementation of Modbus communication.
|
|
| 应用说明 |
PDF
2.23 MB
日本語
AI 生成的摘要:
EtherCAT slave stack code for the Renesas RX72M platform enables Ethernet over EtherCAT (EoE) functionality, supporting real-time control and communication for automation systems. The stack includes features such as EtherCAT State Machine, mailbox protocols like CoE, synchronization modes, and the M3S-T4-Tiny Ethernet over EtherCAT profile. The software structure integrates EtherCAT slave and TCP/IP sample parts, with EoE encapsulating Ethernet frames for seamless communication. The TCP/IP sample acts as an echo server, while the EtherCAT sample manages I/O control via LEDs and DIP switches on the RSK board. Setup involves configuring communication, RSK, and CPU boards, generating slave stack code, and using TwinCAT3 for testing and evaluation.
|
|
| 应用说明 | PDF 940 KB 日本語 | |
| 应用说明 |
PDF
2.55 MB
日本語
AI 生成的摘要:
The sample program enables vector control of a resolver-equipped stepping motor using EtherCAT communications on RX72M devices. It integrates the EtherCAT Slave Stack Code (SSC) from Beckhoff to facilitate industrial Ethernet communication. The program runs on an RX72M CPU card combined with an inverter board, supporting motor control via EtherCAT with compliance to the CiA402 drive profile. It requires modification when ported to other microcontrollers and extensive testing. The development environment includes Renesas e2 studio and TwinCAT 3 software. The package includes projects with added API functions for motor control and EtherCAT communication, converting position and velocity units to CiA402 standards.
|
|
| 应用说明 |
PDF
1.40 MB
日本語
AI 生成的摘要:
EtherCAT communication setup for the RX72M CPU Card enables industrial network evaluation using a 240MHz RX CPU with 4MB flash and 512KB RAM. The guide covers hardware setup, including jumper settings and power supply via USB, and connection of communication boards with Ethernet and USB cables. It details software installation of e2studio and CC-RX compiler, importing EtherCAT slave stack code, and integration with TwinCAT for network scanning and I/O operation. The environment requires specific tools like SSC Tool, Beckhoff TwinCAT 3, and Renesas E2 On-Board emulator to facilitate programming and debugging.
|
|
| 应用说明 |
PDF
2.79 MB
日本語
AI 生成的摘要:
The sample program implements encoder vector control for permanent magnet synchronous motors (PMSM) using the RX72M microcontroller with EtherCAT communications. It integrates the EtherCAT Slave Stack Code (SSC) from Beckhoff to enable industrial Ethernet communication. The program runs on an RX72M CPU card combined with an inverter board and supports motor control compliant with the CiA402 drive profile. The development environment includes Renesas e2 studio and C compiler, with hardware such as the BLY171D BLDC motor and AMT102-V encoder. The program modifies existing motor control and EtherCAT projects to add EtherCAT-based motor control APIs and CiA402-compliant objects.
|
|
| 应用说明 |
PDF
1.28 MB
日本語
AI 生成的摘要:
The guide explains how to run CC-Link IE TSN Class A communication on the RX72M CPU Card for industrial network evaluation. It covers the use of an evaluation version of the CC-Link IE TSN Class A stack from Sherpa Inc., detailing its transfer protocol and security policy. The document outlines the operating environment, including hardware specifications like CPU frequency, memory capacity, and communication protocols. It provides step-by-step instructions for setting up the evaluation board, selecting power sources, installing the e2 studio development environment and CC-RX compiler, importing sample projects, and programming/debugging. Functional restrictions of the evaluation stack, such as a 90-minute runtime limit, are also noted.
|
|
| 应用说明 |
PDF
1.35 MB
日本語
AI 生成的摘要:
The document explains how to operate CC-Link IE TSN Class A communication on the RX72M CPU Card for industrial network evaluation. It details the use of an evaluation version of the CC-Link IE TSN Class A stack, which supports version 2.0 of the transfer protocol but has a 90-minute runtime limit and no security policy. The guide covers the operating environment, hardware setup including flash programming and power supply, installation of the e2 studio IDE with the CC-RX compiler, and steps for importing, programming, and debugging sample projects. It also includes instructions for verifying operation using GX-Works3 and configuring communication connections.
|
|
| 应用说明 |
PDF
267 KB
日本語
AI 生成的摘要:
The RX72M industrial network protocol stack sample program package integrates multiple protocol stacks including EtherCAT, OPC UA, Modbus TCP, EtherNet/IP, PROFINET RT, and CC-Link IE TSN ClassA. It enables immediate development of user application layers on the RX72M CPU card, operating at 240 MHz with 4 MB code flash and 512 KB RAM. The package includes structured folders with individual zip files for each protocol stack sample program, facilitating industrial Ethernet and fieldbus communications.
|
|
| 应用说明 |
PDF
324 KB
日本語
AI 生成的摘要:
The RX72M communications board sample program package provides industrial network protocol stack software and a common API library for multiple protocols including EtherCAT, OPC UA, Modbus TCP, EtherNet/IP, PROFINET RT, CANopen, DeviceNet, and PROFIBUS DP. It supports development on the RX72M board with a 240 MHz RX CPU, 4 MB flash, and 512 KB RAM, running under e2 studio with CC-RX compiler. The package includes structured folders containing sample programs, hardware manuals, and API libraries, enabling immediate user application development for industrial Ethernet and fieldbus networks.
|
|
| 应用说明 |
PDF
4.16 MB
日本語
AI 生成的摘要:
EtherNet/IP communication with the RX72M communications board enables industrial network evaluation using a real-time OS μC3 and TCP/IP stack μNet 3. The sample program utilizes an evaluation version of the EtherNet/IP stack from JSL Technology, restricted to evaluation use only. The document details the operating environment, supported CIP objects such as Identity, Message Router, Assembly, Connection Manager, TCP/IP Interface, and Ethernet Link, and provides setup instructions for the evaluation board, development tools, and debugging methods. It also guides on network configuration and connection verification using CODESYS.
|
|
| 应用说明 |
PDF
4.03 MB
日本語
AI 生成的摘要:
EtherNet/IP communication setup with the RX72M CPU Card enables industrial network evaluation using E-Force's real-time OS μC3 and TCP/IP stack μNet 3. The sample program utilizes an evaluation version of the EtherNet/IP stack by JSL Technology Co., Ltd., which restricts use to evaluation only. The document details supported CIP objects, operating environment specifications including CPU clock, memory, and communication protocols, and guides users through environment setup, software installation, and connection configuration with CODESYS. It covers key CIP objects like Identity, Message Router, Assembly, Connection Manager, TCP/IP Interface, and Ethernet Link, ensuring compatibility with CIP Networks Library standards.
|
|
| 应用说明 |
PDF
2.68 MB
日本語
AI 生成的摘要:
Modbus protocol stack supports Ethernet-based Modbus TCP, RS-485 serial Modbus RTU, and Modbus ASCII protocols on RX72M. It enables development of Modbus TCP server, gateway, RTU master/slave, and ASCII master/slave applications. The stack supports nine key Modbus function codes including reading and writing coils and registers. It runs on e-Force's μC3 real-time OS and μNet3 TCP/IP stack. The document details hardware setup, software installation, sample applications, API usage, communication testing, and system configuration for Modbus communication on RX72M.
|
|
| 应用说明 |
PDF
1.90 MB
日本語
AI 生成的摘要:
The document explains how to run OPC UA Server communications on the RX72M CPU Card using an evaluation version of the OPC UA stack compliant with Release 1.03 specifications and UA-Binary transfer protocol without security policies. It details the operating environment requirements, including hardware specifications and development tools like e2 studio and CC-RX compiler. Setup instructions cover CPU Card jumper settings, power supply via USB, and software installation steps. The evaluation stack has a 90-minute runtime limit and is restricted to non-commercial use. The document guides users through sample project import, programming, debugging, and OPC UA client setup for industrial network evaluation.
|
|
| 应用说明 |
PDF
2.52 MB
日本語
AI 生成的摘要:
The RX72M CPU Card enables PROFINET communication for industrial network evaluation using E-Force's real-time OS μC3 and TCP/IP stack μNet 3. It supports the RX72M Group with a 240 MHz RX CPU, 4 MB code flash, and PROFINET stack version 5.6.0.0. The sample program uses an evaluation PROFINET stack from JSL Technology with functional restrictions and is intended for evaluation only. The document covers operating environment setup, CPU card configuration, power supply, installation of development tools, evaluation environment construction, and sample project operation including IP and MAC address settings and CODESYS integration.
|
|
| 传单 | PDF 205 KB 日本語 | |
| 传单 | PDF 185 KB 日本語 | |
| 传单 | PDF 324 KB 日本語 | |
| 应用说明 |
PDF
3.52 MB
日本語
AI 生成的摘要:
PROFINET communication setup with the RX72M communications board enables industrial network evaluation using a real-time OS μC3 and TCP/IP stack μNet 3. The sample program employs an evaluation version of the PROFINET stack by JSL Technology, restricted to non-product integration use. The RX72M board operates at 240 MHz with 4 MB code flash and supports PROFINET version 5.4.3.0. The environment requires e2Studio IDE and CC-RX compiler. Setup involves configuring jumpers, power supply selection (5 V DC or USB), and JTAG mode settings. The sample program folder includes libraries, source code, and PROFINET stack configuration data.
|
|
| 应用说明 |
PDF
6.93 MB
日本語
AI 生成的摘要:
The RX72M enables single-chip motor control of a permanent magnet synchronous motor (PMSM) using EtherCAT communications. It integrates an encoder vector control function and interfaces with the EtherCAT Slave Stack Code (SSC) from Beckhoff for industrial Ethernet communication. The sample program runs on RX72M CPU cards combined with a 24-V system inverter board. It supports motor control conforming to the CiA402 drive profile and includes API functions for motor operation via EtherCAT. The development environment supports Renesas e2 studio, IAR Embedded Workbench, and GCC compilers. The document details hardware and software configurations, motor control parameters, API functions, and integration with TwinCAT and CODESYS PLC software.
|
|
| 应用说明 |
PDF
822 KB
日本語
AI 生成的摘要:
The guide explains how to run CANopen communications on the RX72M communications board using an evaluation version of the CANopen stack from M2M craft Co., Ltd. It details the operating environment, including hardware specifications such as the RX72M CPU running at 240 MHz, memory capacities, and supported development tools like e2 studio and CC-RX compiler. The document covers board setup, jumper configurations, power supply options, and connection details for the CAN interface. It also provides instructions for importing sample projects, programming, debugging, and verifying CANopen slave node operations with node ID configurations.
|
|
| 应用说明 |
PDF
1.03 MB
日本語
AI 生成的摘要:
The document explains how to run DeviceNet communications on the RX72M communications board using an evaluation version of the DeviceNet stack from M2M craft Co., Ltd. It details the supported communication protocols, transfer rates, and MAC ID range. The evaluation stack has functional limitations such as fixed communication services, limited object dictionary entries, and a 60-minute runtime limit. The setup process includes board configuration, power source selection, software installation, and debugging using e2 studio and the CC-RX compiler. It also covers hardware connections and verification of sample program operation.
|
|
| 应用说明 |
PDF
693 KB
日本語
AI 生成的摘要:
The guide explains how to run PROFIBUS communications on the RX72M communications board using an evaluation version of the PROFIBUS DP Master Class 1 stack by M2M craft Co., Ltd. It supports multiple baud rates from 9600bps to 1.5Mbps and is limited to communication with one slave and fixed 8-byte I/O data size. The document details the operating environment, board setup including jumper and power source configuration, software installation with e2 studio and CC-RX compiler, and steps for programming and debugging. It also covers verifying operation and connection configurations for industrial network evaluation.
|
|
| 应用说明 |
PDF
785 KB
日本語
AI 生成的摘要:
The startup manual guides running CANopen communications on the RX72M communications board, focusing on the CANopen master protocol compliant with CiA 301 v4.2. It covers the evaluation environment, including hardware specifications such as the RX72M CPU running at 240 MHz, memory capacities, and required software tools like e2 studio and the CC-RX compiler. The manual details board setup, jumper configurations, power supply options, and connection interfaces. It also explains importing sample projects, programming, debugging, and verifying CANopen master operations using an evaluation version of the CANopen stack with functional limitations for testing purposes.
|
|
| 应用说明 |
PDF
1.55 MB
日本語
AI 生成的摘要:
The document explains how to run OPC UA Server communications on the RX72M communications board using an evaluation version of an OPC UA stack compliant with Release 1.03 specifications. It details the operating environment, including hardware and software requirements, and guides users through setting up the board, selecting power sources, installing development tools, and importing sample projects. The evaluation stack has a 90-minute runtime limit and lacks security policies. The manual also covers connection configurations, debugging, and OPC UA client setup procedures.
|
|
| 应用说明 |
PDF
881 KB
日本語
AI 生成的摘要:
PROFIBUS communications run on the RX72M communications board using an evaluation version of the PROFIBUS-DP V1 Slave stack from JSL Technology. The stack supports multiple baud rates up to 12 Mbps and fixed IO data size of 8 bytes. The evaluation version limits station number to 32 and stops after 60 minutes, requiring a reset to restart. The RX72M board operates at 240 MHz with 4 MB flash and 512 KB RAM, using e2 studio and CC-RX compiler for development. Setup includes jumper configuration, power supply selection (5 V DC or USB), and RS-485 interface connections. The document guides through installation, programming, debugging, and evaluation procedures for industrial network communication.
|
|
29 项目
|
||
下载
| 类型 | 文档标题 | 日期 |
|---|---|---|
| 示例代码 | RX72M Group EtherCAT ETG.5003 Sample Program Firmware Information Technology Rev.1.30 [Software=RX Driver Package|V1.43],[Toolchains=CC-RX|V3.07] ZIP 8.22 MB 日本語 应用: 工业, 消费电子产品 Compiler: CC-RX Function: Protocol IDE: e2 studio This application note describes a sample program of a slave device applied to semiconductor manufacturing equipment in EtherCAT® communication, which is one of the industrial Ethernet communication protocols. This application note mainly describes the firmware update function (ETG.5003.2) using the File Access over EtherCAT (FoE) protocol. | |
| 示例代码 | RX72M Group Communications Board EtherCAT Startup Manual Rev.1.06 [Software=RX Driver Package|V1.43],[Toolchains=CC-RX|V3.07] ZIP 7.43 MB 日本語 应用: 工业, 消费电子产品 Compiler: CC-RX Function: Application Example, Evaluation Kit, Protocol, Software Package IDE: e2 studio | |
| 示例代码 | RX72M Group Communications Board Modbus Startup Manual Rev.2.00 [Software=RX Driver Package|V1.43],[Toolchains=CC-RX|V3.06] ZIP 13.79 MB 日本語 应用: 工业, 消费电子产品 Compiler: CC-RX Function: Application Example, Evaluation Kit, Protocol, Software Package IDE: e2 studio | |
| 示例代码 | ZIP 6.75 MB | |
| 示例代码 | RX72M Group EtherCAT CiA402 Sample Program Firmware Information Technology Rev.1.10 [Software=RX Driver Package|V1.41],[Toolchains=CC-RX|V3.05] ZIP 3.31 MB 日本語 应用: 工业, 消费电子产品 Compiler: CC-RX Function: Protocol IDE: e2 studio | |
| 示例代码 | RX72M Group Resolver stepping motor control using EtherCAT Communications Rev.1.10 [Software=RX Driver Package|V1.41],[Toolchains=CC-RX|V3.05] ZIP 5.78 MB 日本語 应用: 工业, 消费电子产品 Compiler: CC-RX Function: Application Example, Evaluation Kit, Protocol, Software Package IDE: e2 studio | |
| 示例代码 | RX72M Group CPU Card EtherCAT Startup Manual Rev.1.01 [Software=RX Driver Package|V1.41],[Toolchains=CC-RX|V3.05] ZIP 4.80 MB 日本語 应用: 工业, 消费电子产品 Compiler: CC-RX Function: Application Example, Evaluation Kit, Protocol, Software Package IDE: e2 studio | |
| 示例代码 | RX72M Group Encoder BLDC motor control using EtherCAT Communications Rev.1.10 [Software=RX Driver Package|V1.41],[Toolchains=CC-RX|V3.05] ZIP 8.03 MB 日本語 应用: 工业, 消费电子产品 Compiler: CC-RX Function: Application Example, Evaluation Kit, Protocol, Software Package IDE: e2 studio | |
| 示例代码 | RX72M Group Communications Board CC-Link IE TSN Class A Startup Manual Rev.1.00 [Software=RX Driver Package|V1.41],[Toolchains=CC-RX|V3.01] ZIP 33.87 MB 日本語 应用: 工业, 消费电子产品 Compiler: CC-RX Function: Application Example, Evaluation Kit, Protocol, Software Package IDE: e2 studio | |
| 示例代码 | RX72M Group CPU Card CC-Link IE TSN ClassA Startup Manual [Software=RX Driver Package|V1.41],[Toolchains=CC-RX|V3.01] ZIP 34.10 MB 日本語 应用: 工业, 消费电子产品 Compiler: CC-RX Function: Application Example, Evaluation Kit, Protocol, Software Package IDE: e2 studio | |
| 示例代码 | RX72M Group CPU card Sample program Package Rev.1.01 [Software=RX Driver Package|V1.37],[Toolchains=CC-RX|V3.01] ZIP 66.26 MB 日本語 应用: 工业, 消费电子产品 Compiler: CC-RX Function: Application Example, Evaluation Kit, Protocol, Software Package IDE: e2 studio | |
| 示例代码 | RX72M Group Communications Board Sample program Package Rev.1.10 [Software=RX Driver Package|V1.37],[Toolchains=CC-RX|V3.01] ZIP 85.97 MB 日本語 应用: 工业, 消费电子产品 Compiler: CC-RX Function: Application Example, Evaluation Kit, Protocol, Software Package IDE: e2 studio | |
| 示例代码 | RX72M Group Communications Board EtherNet/IP Startup Manual Rev.1.06 [Software=RX Driver Package|V1.41],[Toolchains=CC-RX|V3.01] ZIP 7.27 MB 日本語 应用: 工业, 消费电子产品 Compiler: CC-RX Function: Application Example, Evaluation Kit, Protocol, Software Package IDE: e2 studio | |
| 示例代码 | RX72M Group CPU Card EtherNet/IP Startup Manual [Software=RX Driver Package|V1.41],[Toolchains=CC-RX|V3.01] ZIP 7.00 MB 日本語 应用: 工业, 消费电子产品 Compiler: CC-RX Function: Application Example, Evaluation Kit, Software Package IDE: e2 studio | |
| 示例代码 | RX72M Group CPU Card Modbus Startup Manual [Software=RX Driver Package|V1.41],[Toolchains=CC-RX|V3.01] ZIP 5.50 MB 日本語 应用: 工业, 消费电子产品 Compiler: CC-RX Function: Application Example, Evaluation Kit, Software Package IDE: e2 studio | |
| 示例代码 | RX72M Group CPU Card OPC UA Startup Manual [Software=RX Driver Package|V1.41],[Toolchains=CC-RX|V3.01] ZIP 4.47 MB 日本語 应用: 工业, 消费电子产品 Compiler: CC-RX Function: Application Example, Evaluation Kit, Protocol, Software Package IDE: e2 studio | |
| 示例代码 | RX72M Group CPU Card PROFINET Startup Manual [Software=RX Driver Package|V1.41],[Toolchains=CC-RX|V3.01] ZIP 9.87 MB 日本語 应用: 工业, 消费电子产品 Compiler: CC-RX Function: Application Example, Evaluation Kit, Software Package IDE: e2 studio | |
| 示例代码 | RX72M Group Communications Board PROFINET Startup Manual Rev.1.04 [Software=RX Driver Package|V1.41],[Toolchains=CC-RX|V3.01] ZIP 8.24 MB 日本語 应用: 工业, 消费电子产品 Compiler: CC-RX Function: Application Example, Evaluation Kit, Protocol, Software Package IDE: e2 studio | |
| 示例代码 | RX24T, RX72M, RAA3064002GFP/RAA3064003GFP Reference Guide for a 2-Axis Robot Arm with 2-Phase Stepping Motors Incorporating Resolvers Rev.1.00 - Sample Code This sample code is sample software for tuning and GUI-based demo operation of a 2-axis robot arm system. The system consists of RX72M-based robot arm trajectory control software and RX24T-based motor control software. | |
| 示例代码 | RX Group Single-Chip Motor Control via EtherCAT Communications Rev.1.10 - Sample Code | |
| 示例代码 | RX72M Group Communications Board CANopen (Master) Startup Manual Rev.1.01 [Software=RX Driver Package|V1.41],[Toolchains=CC-RX|V3.01] ZIP 1.99 MB 日本語 应用: 工业, 消费电子产品 Compiler: CC-RX Function: Application Example, Evaluation Kit, Protocol, Software Package IDE: e2 studio | |
| 示例代码 | RX72M Group Communications Board CANopen (Slave) Startup Manual Rev.1.01 [Software=RX Driver Package|V1.41],[Toolchains=CC-RX|V3.01] ZIP 1.91 MB 日本語 应用: 工业, 消费电子产品 Compiler: CC-RX Function: Application Example, Evaluation Kit, Protocol, Software Package IDE: e2 studio | |
| 示例代码 | RX72M Group Communications Board DeviceNet (Slave) Startup Manual Rev.1.01 [Software=RX Driver Package|V1.41],[Toolchains=CC-RX|V3.01] ZIP 2.22 MB 日本語 应用: 工业, 消费电子产品 Compiler: CC-RX Function: Application Example, Evaluation Kit, Protocol, Software Package IDE: e2 studio | |
| 示例代码 | RX72M Group Communications Board PROFIBUS (Master) Startup Manual Rev.1.01 [Software=RX Driver Package|V1.41],[Toolchains=CC-RX|V3.01] ZIP 1.87 MB 日本語 应用: 工业, 消费电子产品 Compiler: CC-RX Function: Application Example, Evaluation Kit, Protocol, Software Package IDE: e2 studio | |
| 示例代码 | RX72M Group Communications Board OPC UA Startup Manual Rev.1.00 [Software=RX Driver Package|V1.41],[Toolchains=CC-RX|V3.01] ZIP 4.28 MB 日本語 应用: 工业, 消费电子产品 Compiler: CC-RX Function: Application Example, Evaluation Kit, Protocol, Software Package IDE: e2 studio | |
| 示例代码 | RX72M Group Communications Board PROFIBUS (Slave) Startup Manual Rev.1.00 [Software=RX Driver Package|V1.41],[Toolchains=CC-RX|V3.01] ZIP 1.95 MB 日本語 应用: 工业, 消费电子产品 Compiler: CC-RX Function: Application Example, Evaluation Kit, Protocol, Software Package IDE: e2 studio | |
26 项目 | ||
相关评估板和套件
入门
RX72M 瑞萨电子入门套件+
RX72M 瑞萨电子入门套件+ 对于初次使用 RX72M（代码闪存 4MB、引脚数 224）的开发人员来说，是一个非常完善的入门套件。 这一套件包含 LCD 显示器模块和片上调试仿真器。 集成开发环境由瑞萨电子网站提供，您可以在打开包装盒后立即开始评估 RX72M。 请使用本产品体验 RX72M 的性能和功能。
评估
CPU Card with RDC-IC for RX72M MCU Group
本产品是一款用于 RX72M 电机控制的 CPU 卡。 与相应的逆变板结合使用，可以控制 BLDC 电机和步进电机。
支持的逆变器板（套件）
- BLDC 电机评估系统（P/N：RTK0EMX270S00020BJ）
- 配备旋转变压器的步进电机评估系统（P/N：RTK0EMX270S01020BJ）
视频
Introducing an EtherCAT motor control solution using Renesas' high-performance 32-bit microcontroller RX72M. This solution enables synchronous control of the motors in multiple equipment by connecting to EtherCAT, an industrial Ethernet communication system with high synchronous control performance.
新闻和博客
博客 2023年10月19日 |
博客 2023年7月21日 |
博客 2023年5月23日 |
博客 2023年2月8日 |
博客 2022年11月25日 |
博客 2022年7月6日 |
博客 2022年6月7日 |
博客 2022年4月25日 |
博客 2021年9月9日 |
博客 2021年4月13日 |
博客 2020年4月7日 |
