特性
- Maximum target input capacitance: 260pF
- Sampling rates as fast as 0.7ms at 8-bit, 1.6ms at 10-bit, 5.0ms at 12-bit, 18.5ms at 14-bit
- Digital compensation of sensor: piece-wise 1st and 2nd order sensor compensation or up to 3rd order single-region sensor compensation
- Digital compensation of 1st and 2nd order temperature gain and offset drift
- Internal temperature compensation reference (no external components)
- Programmable capacitance span and offset
- Layout customized for die-die bonding with sensor for low-cost, high-density chip-on-board assembly
- Accuracy as high as ±0.25% full-scale output at -40°C to 125°C, 3V, 5V, Vsupply ±10% (see data sheet section 1.3 for restrictions)
描述
The ZSSC3123 cLite™ is a CMOS integrated circuit for accurate capacitance-to-digital conversion and sensor-specific correction of capacitive sensor signals. Digital compensation of sensor offset, sensitivity and temperature drift is accomplished via an internal digital signal processor running a correction algorithm with calibration coefficients stored in a nonvolatile EEPROM. The ZSSC3123 is configurable for capacitive sensors with capacitances up to 260pF and a sensitivity of 125aF/LSB to 1pF/LSB depending on resolution, speed, and range settings. It is compatible with both single capacitive sensors (both terminals must be accessible) and differential capacitive sensors. Measured and corrected sensor values can be output as I²C, SPI, PDM, or alarms. The I²C interface can be used for a simple PC-controlled calibration procedure to program a set of calibration coefficients into an on-chip EEPROM. The calibrated ZSSC3123 and a specific sensor are mated digitally: fast, precise, and without the cost overhead of trimming by external devices or laser.
产品参数
| 属性 | 值 |
|---|---|
| Function | Capacitive SSC |
| Automotive Qual. | No |
| Supply Voltage (V) | 2.3 - 5.5 |
| Input Type | Single-capacitor |
| Interface | I2C, SPI, PDM, Two Alarms |
| Adj. Analog Gain | 2 - 8, 8 - 32, 32 - 130 |
| Resolution (bits) | 14 |
| Sample Rate Max (KHz) | 1 |
| Temp. Range (°C) | -40 to +85°C, -40 to +125°C, -40 to 85°C, -40 to 125°C |
应用方框图
 | 智能井盖 采用物联网技术的低成本智能井盖，用于实时监控和高效的城市基础设施。 |
完成您的设计
寻找相关的产品，完善您的设计
Renesas Boards & Kits
Evaluation Kit for ZSSC3122 and ZSSC3123
The ZSSC3122-3123KIT SSC Evaluation Kit contains the hardware needed for configuration, calibration and evaluation of the ZSSC3122 and ZSSC3123 capacitive sensor signal conditioning (SSC) ICs. The user's computer can communicate with the ZSSC3122 or ZSSC3123 IC socketed on the cLite SSC... 阅读详情
Mass Calibration System of ZSSC3123
The ZSSC3123 Mass Calibration System provides the hardware needed for simultaneous configuration, calibration and evaluation of multiple ZSSC3123 Capacitive Sensor Signal Conditioner (SSC) ICs. The user's PC can communicate via the SSC Communication Board with multiple ZSSC3123 ICs (DUTs)... 阅读详情
Wide Capacitive Sensor Signal Conditioner with Digital Output Evaluation Board
The US082-ZSSC3123EVZ board demonstrates the functionality and performance of the ZSSC3123 wide capacitive sensor. The board provides a standard Pmod™ Type 6A (extended I2C) connection for the onboard sensor to plug into any required MCU evaluation kit with a matching connector. The... 阅读详情
用于校准 ZSSC Pmod 宽电容式传感器的转换板
US082-SSCALINTRP5VZ 转换板可将宽电容式 ZSSC Pmod™ 传感器灵活地连接到 SSC 通信板上，以执行校准工作。 使用转换板可大幅降低意外断线和接线错误的风险。 与使用跳线相比，使用转换板可提供更可靠、更安全的连接。
