特性
- Ultra wide input voltage range 3V to 40V (refer to "Input Voltage" on page 12 for more details)
- Less than 5µA (max) shutdown input current (IC disabled)
- Temperature range -40°C to +105°C
- Integrated high-side MOSFET
- Operational topologies
- Synchronous buck
- Non-synchronous buck
- Programmable frequency from 200kHz to 2.2MHz and frequency synchronization capability
- ±1% tight voltage regulation accuracy
- Reliable cycle-by-cycle overcurrent protection
- Temperature compensated current sense
- Frequency foldback
- Programmable OC limit
- Hiccup mode protection in worst case short condition
- 20 Ld HTSSOP package, pin-to-pin compatible with ISL78201 boost buck
- AEC-Q100 qualified
- Pb-free (RoHS compliant)
描述
The ISL78206 is an AEC-Q100 qualified 40V, 2. 5A synchronous buck controller with a high-side MOSFET and low-side driver integrated. The ISL78206 supports a wide input voltage range from 3V to 40V, output current up to 2. 5A, and can be operated in synchronous and non-synchronous buck topologies. The ISL78206 provides a low system cost, high efficiency, single part buck solution for automotive applications for a wide variety of input voltages. For vehicle systems that must be kept powered during cold-cranking or start-stop operation, the ISL78206 can be replaced by its pin-to-pin alternative, the ISL78201 which offers boost-buck operation. Together, these devices offer two functional alternatives on the same PCB layout, providing convenience, flexibility, and facilitating extensive design reuse. The ISL78206 offers the most robust current protections. It uses peak current mode control with cycle-by-cycle current limiting. It is implemented with frequency foldback undercurrent limit conditions. In addition, the hiccup overcurrent mode is also implemented to guarantee reliable operations under harsh short conditions. The ISL78206 has comprehensive protections against various faults, including overvoltage, undervoltage, programmable overcurrent and over-temperature. Built-in soft-start allows the IC to start-up smoothly and is reactivated during hiccup mode fault recovery.
产品参数
| 属性 | 值 |
|---|---|
| Topology [Rail 1] | Buck |
| Outputs (#) | 1 |
| Input Voltage (Min) [Rail 1] (V) | 3 |
| Input Voltage (Max) [Rail 1] (V) | - |
| Output Voltage (Min) [Rail 1] (V) | 0.8 |
| Output Voltage (Max) [Rail 1] (V) | 38 |
| Output Current (Max) [Rail 1] (A) | 2.5 |
| Switching Frequency Range (Typical) (kHz) | - |
| Control Type | Current Mode |
| Peak Efficiency (%) | 96 |
| IQ [Rail 1] (µA) | 1300 |
| SYNCH Capability | Yes |
| Qualification Level | Automotive |
| Temp. Range (°C) | -40 to +105°C |
封装选项
| Pkg. Type | Pkg. Dimensions (mm) | Lead Count (#) |
|---|---|---|
| TSSOP-EP | 6.5 x 4.4 x 0.00 | 20 |
应用方框图
|
基础型摄像头监控系统
一款高性价比基础型摄像头监控系统，通过 MCU 光学传感器和视频处理器优化亮度。
|
|
低成本智能仪表盘
低成本智能仪表盘采用单芯片设计，适用于高效的自定义 LCD 自行车和汽车显示器。
|
|
高级汽车域控制器（AADC）
高级汽车域控制器集成了关键系统，可实现更智能、更互联的汽车。
|
|
经济高效型汽车触觉触摸键模块，大大提升驾驶员安全
具有触觉反馈的触摸界面可提高汽车内部安全性和用户体验。
|
|
无线车载远程信息处理单元
先进的远程信息处理系统可实现无缝连接、NFC 集成、OTA 升级和能源效率。
|
|
垃圾车管理系统
智能垃圾管理系统通过重量追踪、路线优化和实时监测来提高管理效率。
|
|
高性能 EV 冷却系统
先进的 EV 冷却系统可通过多功能高性能 MCU 提供高效热管理方案。
|
|
车辆控制单元
车辆控制单元支持服务导向架构（SOA）和区域架构，提供多核性能，符合 FuSa 标准。
|
|
具有远程信息处理功能的低成本 TFT 仪表集群
带远程信息处理、蓝牙低功耗、Wi-Fi 镜像和高清摄像头支持的仪表集群设计。
|
|
通信网关和集成 DVR/DMS 系统
融合 CoGW 与 DVR/DMS 视频处理功能的集成式汽车网关解决方案。
|
|
未来 E/E 架构的车载电脑
下一代车载计算机系统，用于具有高计算能力的高级 E/E 架构。
|
|
带 CAN/LIN 接口的汽车传感器
汽车传感器系统支持 SSC、MCU 和 LIN/CAN，提供高精度、灵活性和可靠的性能。
|
|
固态汽车电力分配模块
固态电源模块通过 IPD 保护和控制实现安全、紧凑的汽车网络。
|
其他应用
- Automotive applications
- General purpose power regulator
- 24V bus power
- Battery power
- Embedded processor and I/O supplies