跳转到主要内容
瑞萨电子 (Renesas Electronics Corporation)

描述

EK-RA8T2 评估套件可用于评估 RA8T2 MCU 产品组的功能,并使用瑞萨的 Flexible Software Package(FSP)和 e2 studio IDE 开发嵌入式系统应用。 用户可借助丰富的板载功能和主流生态系统插件,实现多种 AI、IoT 等应用。 此外,还提供了一系列示例项目,帮助用户快速评估关键外设并加速概念验证开发。

该套件具备丰富的工业网络接口,如以太网(2 通道,支持 RGMII/GMII/RMII/MII 配置)、EtherCAT 从站、USB 全速、隔离式 RS485/MODBUS,以及 CAN FD(2 通道),可支持网络类应用的快速开发。 套件已预置演示程序,用于展示 RA8T2 的卓越性能,以便用户开箱即可评估 RA8T2 的功能特性。

特性

  • MCU 原生引脚连接区
    • R7KA8T2LFLCAC MCU
      • 1GHz,Arm® Cortex-M85® 内核
      • 250MHz,Arm® Cortex-M33® 内核
      • 1MB MRAM、2MB ECC SRAM
      • 289 引脚、BGA 封装、12mm x 12mm x 1.38mm、0.65mm 间距
    • 提供 2 × 40 引脚排针的原生引脚访问(未装配)
    • SDRAM 接口、以太网/gPTP/时间感知整形器(TAS)接口,以及引脚访问排针(未装配)
    • MCU 和 USB 电流测量点
  • 特殊功能访问区
    • 以太网 x 2(支持 RGMII/GMII/RMII/MII 配置)
    • EtherCAT 从站配置(ID 开关、状态 LED、32Kb EEPROM)
    • 64MB SDRAM
    • 64MB 外部 Octo-SPI 闪存
    • 隔离式 RS485/MODBUS
    • CAN FD x 2
  • 生态系统和系统控制访问区
    • USB 全速主机和设备功能
    • 三个 5V 输入源
      • USB(调试模式,全速) 
      • 外部供电
    • 调试模式
      • 板载 SEGGER J-Link™ 调试(SWD 和 JTAG)
      • 调试输入 (ETM、SWD、SWO 和 JTAG)
      • 调试输出 (SWD、SWO 和 JTAG)
    • 用户 LED 灯和按钮
      • 三色用户 LED 指示灯(红色、蓝色、绿色)
      • 显示调节电源可用性的电源 LED 指示灯(白色)
      • 显示调试连接的调试 LED 指示灯(黄色)
      • 两个用户按钮
      • 一个复位按钮
    • 五个最受欢迎的生态系统扩展功能
      • MikroElektronika™ mikroBUS 连接器(未装配)
      • SparkFun® Qwiic® 连接器(未装配)
      • 两个 SeeedGrove® 系统(I2C 和模拟)连接器(未装配)
      • 两个 Digilent Pmod™(SPI/UART/I2C) 连接器
      • Arduino®(Uno R3)连接器
    • MCU 启动配置跳线
  • 套件内容:EK-RA8T2 板

应用

类型 文档标题 日期
快速入门指南 PDF 2.26 MB 日本語
Describes the out-of-box demonstration for the EK-RA8T2 and how to customize the demonstration for application development.
手册 - 开发工具 PDF 5.63 MB 日本語
See an outline of the functionality of EK-RA8T2 and how to quickly evaluate RA8T2 features.
PCB 设计文件
登录后下载 ZIP 100.60 MB
应用说明 PDF 2.83 MB
Learn multicore application project creation using the MCUboot module on the Renesas EK-RA8P1 kit using FSP v6.4.0, and recreate the bootloader and link the application projects to work with the bootloader using the FSP solution project. Understand the procedures for configuring an application to work with the bootloader, and for downloading and updating a new application image.
应用说明 PDF 565 KB
The EK-RA8T2 example project shows how to write code using various Flexible Software Package (FSP) modules supported by the EK-RA8T2 kit. The FSP provides an optimized, easy-to-use, scalable, and high-quality software solution for embedded system design. This is the application note for the EK-RA8T2 example project.
手册 - 开发工具 PDF 2.93 MB 日本語
The e² studio integrated development environment demonstrates the process of generating, building, and debugging projects designed for multicore devices in the Renesas RA Family of microcontrollers. Read “Renesas RA Family e² studio 2023-10 or Higher Quick Start Guide” before reading this document.
手册 - 开发工具 PDF 504 KB 日本語
Describes the known issues and exceptions for the EK-RA8T2.
报告 PDF 187 KB 日本語
8 项目

软件与工具

软件与工具

Software title
Software type
公司
Renesas Flash Programmer (Programming GUI)
闪存编程软件【支持 MCU/MPU 和设备:RA、RE、RX、RL78、RH850、RISC-V MCU, Renesas Synergy、DA1453x、DA1459x、DA1469x、DA1470x、DA148xx、电源管理、Renesas USB Power Delivery 系列、电机驱动器/执行器驱动器 IC、V850、78K0R、78K0】
Programmer (Unit/SW) 瑞萨电子
RA 可扩展性强的配置软件包 (FSP)
FSP 是一款增强型软件包,旨在为使用瑞萨电子 RA 系列 Arm 微控制器的嵌入式系统设计提供简单易用且可扩展性强的高质量软件。
Software Package 瑞萨电子
SEGGER™ J-Link™ Software and Documentation Package
Software utilities, firmware updates, and supporting documentation for the J-Link on-board programmer and debugger on the RA MCU kits.
Software Package Segger Microcontroller GmbH
快速连接平台
快速连接平台通过提供兼容的硬件和软件构建模块,实现快速原型设计。
Software and Hardware Development Tools 瑞萨电子
e² studio - RA 产品家族信息
基于 Eclipse 的瑞萨集成开发环境(IDE)。
IDE and Coding Tool 瑞萨电子
5 项目

样例程序

样例程序

筛选
类型 文档标题 日期 日期
示例代码
登录后下载 ZIP 3.02 MB
Learn multicore application project creation using the MCUboot module on the Renesas EK-RA8P1 kit using FSP v6.4.0, and recreate the bootloader and link the application projects to work with the bootloader using the FSP solution project. Understand the procedures for configuring an application to work with the bootloader, and for downloading and updating a new application image.
示例代码
登录后下载 ZIP 21.58 MB
The EK-RA8T2 example project shows how to write code using various Flexible Software Package (FSP) modules supported by the EK-RA8T2 kit. The FSP provides an optimized, easy-to-use, scalable, and high-quality software solution for embedded system design.
示例代码
登录后下载 ZIP 205 KB
Demonstrates some of the capabilities of the EK-RA8T2 and FSP by using multiple peripherals. The example project initializes the OSPI, UART, various timers, and GPIO modules along with various supporting stacks to create an interactive user demo.
3 项目
器件号状态库存Sampleable
RTK7EKA8T2S00001BEActive缺货N/A

EK-RA8T2 满足以下认证/标准要求。 请参阅 EK-RA8T2 用户手册,了解免责声明、注意事项和有关认证的更多详细信息。

EMC/EMI 标准

  • FCC 公告(A 类)– 第 15 部分
  • 符合加拿大创新、科学和经济发展 ICES-003 标准:CAN ICES-3 (A)/NMB-3(A)
  • CE A 类(EMC 指令 2004/108/EEC)
  • UKCA A 级 (EMC)
  • 符合台湾 13438,C6357,A 类限值
  • 澳大利亚/新西兰 AS/NZS CISPR 32:2015,A 类

材料选择、废弃物、循环利用以及废弃标准

  • 欧盟 RoHS
  • WEEE
  • 中国 SJ/T 113642014,10 年环境保护使用期限

安全标准

  • UL 94V-0
支持社区

支持社区

在线询问瑞萨电子工程社群的技术人员,快速获得技术支持。
浏览文章

知识库

浏览我们的知识库,获取文章、常见问题解答及其他实用资源。
提交工单

提交工单

需要咨询技术性问题或提供非公开信息吗?