瑞萨电子 (Renesas Electronics Corporation)
搜索

RA2E1 快速原型开发板

FPB-RA2E1

有效
立即订购
FPB-RA2E1-Quick Start GuideFPB-RA2E1 v1 – User's ManualFPB-RA2E1 v1 - Design Package

RA2E1 快速原型开发板搭载 RA2E1 MCU，是专门用于 RA2E1 MCU 各种应用原型开发的评估板。 内置 E2 Lite 仿真器同级别的仿真器电路，无需增设工具即可实现程序的写入/调试。 此外，标配 Arduino Uno™ 和 Pmod™ 接口，并可通过通孔连接微控制器的所有引脚，具有很高的可扩展性。

示例软件可用于演示 RA2E1 MCU 的功能，并促进 RA2E1 快速原型板与各种无线或传感器模块之间的连接。

使用时，请根据各国家/地区的无线电法规使用蓝牙™、LoRa® 和 Wi-Fi。

RA2E1 Fast Prototyping Board
  • 配备 RA2E1 32位微控制器（R7FA2E1A92DFM）
    • 48MHz，Arm® Cortex®-M23 内核
    • ROM：128KB，RAM：16KB，Data Flash：4KB
    • 64 引脚 LFQFP（10mm x 10mm x 1.7mm，0.5mm 间距）
  • 板载 E2 Lite 仿真器电路，无需额外工具即可对程序进行烧写/调试
  • 通孔，可连接 MCU 的所有引脚
  • Arduino Uno™ 和 Pmod™ 接口
  • 小尺寸板：53mm x 85mm
  • 支持各种 RA2E1 软件和工具
相关文档
类型 文档标题 日期
快速入门指南
FPB-RA2E1-Quick Start Guide
PDF 534 KB 日本語
手册 - 开发工具
FPB-RA2E1 v1 – User's Manual
PDF 1.18 MB 日本語
PCB 设计文件
FPB-RA2E1 v1 - Design Package
登录后下载 ZIP 42.93 MB
应用说明
Combination of Private LoRa® and LoRaWAN® Stack Reference Guide Rev.4.90
PDF 286 KB
The Combination of Private LoRa and LoRaWAN Stack is a sample software that can switch the LoRaWAN and the Private LoRa wireless communications dynamically. This document describes the specification and usage of the sample software.
应用说明
LoRaWAN® Stack Reference Guide Rev.4.90
PDF 579 KB
The LoRaWAN stack supports LoRaWAN interface which implements LoRaWAN protocol (Class A/B/C) specified in the specification version 1.0.4 and 1.0.3 which encompasses version 1.0.2. This document describes the API references and other information to use the LoRaWAN stack.
应用说明
LoRaWAN® Stack Sample Application Rev.4.90
PDF 490 KB
The LoRaWAN stack supports LoRaWAN interface which implements LoRaWAN protocol (Class A/B/C) specified in the specification version 1.0.4 and 1.0.3 which encompasses version 1.0.2. This document describes a sample software to control the LoRaWAN stack by AT command sets.
应用说明
Private LoRa® Stack Reference Guide Rev.4.90
PDF 482 KB
The Private LoRa stack supports a custom protocol for the LoRa-based wireless communication, which can be mainly used for the peer-to-peer and star network. This document describes the API references and other information to use the Private LoRa stack.
应用说明
Private LoRa® Stack Sample Application Rev.4.90
PDF 493 KB
The Private LoRa stack supports a custom protocol for the LoRa-based wireless communication, which can be mainly used for the peer-to-peer and star network. This document describes a sample software to control the Private LoRa stack by AT command sets.
应用说明
RA2E1, RA2L1, RA0E1, RA0E2 LoRaWAN® Sensor Demo Rev.2.90
PDF 667 KB
AI 生成的摘要: The LoRaWAN Sensor Demo package includes sample software that introduces how to visualize sensor data transmitted by a sensor node to Cloud (AWS/Azure) via LoRaWAN networks. This document describes the specification and usage of the sample software.
相关文件：
应用说明
RA2E1, RA2L1, RA0E1, RA0E2 LoRa®-based Wireless Software Package Rev.4.90
PDF 786 KB
AI 生成的摘要: This LoRa-based wireles softwar package includes the sample software and evaluation tools to develop the LoRa and LoRaWAN based applications.This document describes the information on the contents of this package and how to setup the hardware and software.
相关文件：
应用说明
Radio Driver Reference Guide Rev.4.90
PDF 411 KB
The Radio Driver supports basic wireless communictions such as transmit and receive frames with LoRa-based modulation and (G)FSK modulation. This document is an API reference guide for the Radio Driver and MCU timer driver.
应用说明
Radio Driver Support Functions for Regional Radio Regulations Rev.4.90
PDF 430 KB
The support functions for regional radio regulations can be used for the Radio Driver to comply with the regional radio regulations. This document describes the support functions and how to configure each support function.
应用说明
Radio Evaluation Program Commands Reference Rev.4.90
PDF 426 KB
The Radio Evaluation Program can be used when to evaluate the characteristics of the board utilizing the LoRa-based transceiver. This document describes the specification and usage of the Radio Evaluation Program.
手册 - 软件
Renesas LPWA Power Estimator
PDF 370 KB
手册 - 软件
Renesas LPWA Studio
PDF 1.86 MB
应用说明
Low Power Application (Use of ADC, DTC and ELC at Snooze mode) for FPB-RA2E1 and FPB-RA2E2
PDF 3.78 MB
AI 生成的摘要: The RA2E1 and RA2E2 MCUs enable low-power data logging by using ADC, DTC, ELC, and low-power modes such as Snooze and Software Standby. Sensor data is acquired periodically, compared against thresholds, and stored. If data exceeds thresholds, the MCU exits low-power mode to transmit data via UART. The system minimizes CPU activity to reduce power consumption, making it suitable for applications like fitness trackers and fleet devices. Hardware and software resources include Renesas RA kits, Grove sensors, e2 studio IDE, and FSP. The document details mode transitions, peripheral usage, and data handling for efficient low-power operation.
相关文件：
手册 - 开发工具
FPB-RA2E1 Errata
PDF 662 KB 日本語
传单
Flexible Software Package
PDF 412 KB
演示文稿
An Introduction to Renesas Advanced (RA) MCU Kits
PDF 7.02 MB
快速入门指南
RA LoRaWAN® Sensor Demo Tutorial
PDF 2.69 MB 日本語
传单
Renesas RA2E1 Group Flyer
PDF 557 KB 日本語
应用说明
RA2E1 HS3001 Sensor Device Sample - Application Project
PDF 1.50 MB
AI 生成的摘要: The RA2E1 microcontroller interfaces with the HS3001 sensor to measure indoor temperature and humidity, displaying results on an OLED screen with color-coded levels for easy interpretation. The RA2E1 Fast Prototyping Board supports rapid development with built-in debugging, Arduino and Pmod™ compatibility, and extensive pin access. The HS3001 sensor provides highly accurate, calibrated humidity and temperature data via I²C, requiring no user calibration. The document details the RA2E1 architecture, key features including memory, connectivity, analog functions, timers, safety, and security, along with system design, hardware schematics, software environment, and sample code for application development.
相关文件：
应用说明
RA2E1 ZMOD4410 Sensor Device Sample - Application Note
PDF 1.45 MB
AI 生成的摘要: The RA2E1 microcontroller interfaces with the ZMOD4410 sensor module to detect indoor air quality by measuring total volatile organic compounds (TVOC) and estimating carbon dioxide levels. It displays air quality data on an OLED screen using color codes to indicate different health concern levels. The RA2E1 Fast Prototyping Board supports easy development with built-in debugging, Arduino and Pmod™ interfaces, and high expandability. The ZMOD4410 sensor integrates a heater and metal oxide chemiresistor on a MEMS structure, controlled via I2C for flexible measurement options. Applications include thermostats, air purifiers, HVAC, and smart devices. The document details hardware schematics, software environment, sensor middleware integration, and programming instructions.
相关文件：
报告
Table of Hazardous Substance for China RoHS
PDF 187 KB 日本語
24 项目

样例程序
类型
文档标题
日期
示例代码
RA2E1, RA2L1, RA0E1, RA0E2 LoRaWAN® Sensor Demo Rev.2.90
[Software=RA Flexible Software Package|v6.2.0],[Toolchains=GNU Arm Embedded|13.2.1.arm-13-7]
登录后下载 ZIP 1.92 MB
应用: 互联家居与娱乐, 安全性, 家电, 工业, 工业自动化, 楼宇自动化, 通信基础结构
Compiler: GNU ARM Embedded Function: Software Package IDE: e2 studio
The LoRaWAN Sensor Demo package includes sample software that introduces how to visualize sensor data transmitted by a sensor node to Cloud (AWS/Azure) via LoRaWAN networks. This document describes the specification and usage of the sample software.
相关文件：
示例代码
RA2E1, RA2L1, RA0E1, RA0E2 LoRa®-based Wireless Software Package Rev.4.90
[Software=RA Flexible Software Package|v6.2.0],[Toolchains=GNU Arm Embedded|13.2.1.arm-13-7]
登录后下载 ZIP 12.01 MB
应用: 互联家居与娱乐, 安全性, 家电, 工业, 工业自动化, 楼宇自动化, 通信基础结构
Compiler: GNU ARM Embedded Function: Software Package IDE: e2 studio
This LoRa-based wireles softwar package includes the sample software and evaluation tools to develop the LoRa and LoRaWAN based applications.This document describes the information on the contents of this package and how to setup the hardware and software.
相关文件：
示例代码
Low Power Application (Use of ADC, DTC and ELC at Snooze mode) for FPB-RA2E1 and FPB-RA2E2
登录后下载 ZIP 3.62 MB Compiler: GNU Arm Embedded IDE: e2 studio
相关文件：
示例代码
RA2E1 HS3001 Sensor Device Sample - Application Project - Sample Code
[Toolchains=GCC Arm Embedded|8.3.1.20190703] [Software=RA FSP|v3.4.0] [Board=FPB-RA2E1]
登录后下载 ZIP 2.20 MB Compiler: GNU Arm Embedded IDE: e2 studio
相关文件：
示例代码
RA2E1 ZMOD4410 Sensor Device Sample - Application Note - Sample Code
登录后下载 ZIP 2.55 MB
相关文件：
5 项目

开发板与套件

EK-RA2E1 Board
评估
EK-RA2E1 有效

RA2E1 MCU 群组评估套件

EK-RA2E1 评估套件可通过通过瑞萨电子的灵活软件包 (FSP) 和 e2 studio IDE，帮助用户轻松评估 RA2E1 MCU 产品组的特性，并开发嵌入式系统应用程序。 用户可利用丰富的板载功能以及自选的热门生态系统插件来将丰富创意变为现实。

入门

运行快速入门示例项目

  1. EK-RA2E1 板具有预先编程过的快速入门示例项目（EK-RA2E1 示例项目包中提供源代码）。
  2. 用户可使用连接至 5V 电源的 micro USB 设备电缆，通过 USB 调试端口 (J10) 启动 EK-RA2E1 板。 白色电源 LED 指示灯将会亮起... 阅读详情
推荐文档：
EK-RA2E1 – Quick Start Guide
EK-RA2E1 v1 – User's Manual
EK-RA2E1 v1 - Design Package
立即订购

云上实验室

使用我们基于 PC 的 GUI，无需物理板即可在虚拟实验室中立即开始配置和测试设计
无接触式传感器解决方案

本实验演示了基于 RA2E1 MCU 的非接触式触摸操作，让您深入了解家电的创新控制解决方案。
器件号状态库存预算价格（美元）Sampleable
RTK7FPA2E1S00001BEActive有库存1u | $10.95Available

我们将引导首次接触 RA2 系列的用户完成开发环境的安装、项目生成以及使用Fast Prototyping Board 进行基本功能的验证。通过搭载了J-Link ARM 或 E2 Lite（ARM）板载调试器的 RA2 系列开发板作为实际示例，帮助新开发者快速且有信心地开始开发。

其他视频

支持社区

  1. RA2E1_FPB_ZMOD4410_App

    我直接从官网下载的RA2E1_FPB_ZMOD4410_App例程，导入工程以后编译发现有错误 community-ja.renesas.com/.../6712.r01an6014ec0100_2D00_ra2e1_2D00_zmod_2D00_sensor.zip

    2022年8月18日
支持社区

支持社区

在线询问瑞萨电子工程社群的技术人员，快速获得技术支持。
获取支持
浏览文章

知识库

浏览我们的知识库，获取文章、常见问题解答及其他实用资源。
浏览文章
提交工单

提交工单

需要咨询技术性问题或提供非公开信息吗？
提交工单