概览
描述
瑞萨 RZ/T2ME 入门套件+ 是 RZ/T2ME MPU 的一款评测和开发套件。
由于它具有板载仿真器，您只需将附带的数据线连接到 PC 即可开始评测。 该评测板包含千兆以太网 PHY 和八进制闪存等多功能 IC，您可以在没有扩展板的情况下完全评测功能。
特性
- 板载 RZ/T2ME MPU 320 别针（R9A07G075M29GBG）
- 安装千兆以太网 PHY 和八进制闪存等多功能 IC 后，可完全评估目标 MPU 的功能
- Pmod™/Grove®/QWIIC/® mikroBUS™ 等通用接口
- 用于外部扩展的引脚接口可以对多种使用情况进行评估
- 安装仿真器电路后，只需将 USB 点来连接到 PC 上（绑定两个 USB 电缆：一个用于仿真器，另一个用于电源），即可开始程序调试
- 瑞萨的 IDE e2 studio 和 FSP 可用于 RZ/T2
应用
文档
相关文档
请登录后开启订阅
|
|
|
|
|---|---|---|
| 类型 | 文档标题 | 日期 |
| 快速入门指南 | PDF 314 KB 日本語 | |
| 手册 - 开发工具 | PDF 3.20 MB 日本語 | |
| 应用说明 |
PDF
14.63 MB
This application note allows developers to use the Renesas Flexible Software Package (FSP) for writing applications for the RZ/T2, RZ/N2 microprocessor series.
|
|
| 应用说明 |
PDF
356 KB
Introduces practical example projects for the RZT2ME-RSK kit. The example projects contained within the bundle show how to write code for the various Renesas Flexible Software Package (FSP) modules supported by the RZT2ME-RSK kit.
|
|
| 应用说明 |
PDF
4.72 MB
The EtherCAT CiA402 SubDevice Sample Program for the RZ/T and RZ/N Series provides a reference implementation of the CiA402 drive profile using the adapted EtherCAT SubDevice Stack Code. This application note explains how to configure, build, and execute the sample program, including IDE project setup, hardware configuration, and TwinCAT-based evaluation of CiA402 functions such as state transitions, operation modes (CSP/CSV), and synchronization.
|
|
| 应用说明 |
PDF
4.38 MB
The EtherCAT ETG5003 SubDevice Sample Program for the RZ/T and RZ/N Series provides a reference implementation of the ETG.5003 Semiconductor Device Profile using an adapted EtherCAT SubDevice Stack Code. This application note describes how to set up, build, and run the sample program, including toolchain configuration, hardware setup, and TwinCAT-based verification, with a focus on FoE-based firmware updates and ETG.5003 profile compliance.
|
|
| 应用说明 |
PDF
3.82 MB
The EtherCAT EoE SubDevice Sample Program for the RZ/T and RZ/N Series provides a reference implementation of Ethernet over EtherCAT (EoE) using an adapted EtherCAT SubDevice Stack Code. This application note describes how to set up, build, and run the sample program, including IDE project configuration, hardware setup, and verification of EoE communication with TwinCAT, such as operation mode selection and TCP/IP echo communication.
|
|
| 应用说明 |
PDF
5.56 MB
Explains how to set up, build, and run the EtherNet/IP™ OpENer sample program for the RZ/T and RZ/N series, and how to connect it to a CODESYS software PLC for demonstration. This document describes required software and hardware, board setup, project build/debug procedures for e² studio and IAR EWARM, and basic operation using Exclusive Owner and Input Only connections.
|
|
| 发行说明 |
PDF
320 KB
The EtherCAT Sample Program for the RZ/T and RZ/N Series has been verified with Renesas Evaluation boards and RSK boards. It enables EtherCAT communication with major development environments. This release note describes the package structure and supported tools.
|
|
| 发行说明 |
PDF
210 KB
The EtherNet/IP™ OpENer sample program package for the RZ/T and RZ/N series has been validated with Renesas evaluation boards and RSK boards. It provides a ready-to-use reference environment for EtherNet/IP communication based on the open-source OpENer stack. This release note describes the package structure and the supported devices and development tools.
|
|
| 发行说明 |
PDF
344 KB
The lwIP (lightweight IP) Protocol Stack Sample Program Package for the RZ/T2M and RZ/T2ME Group provides verified sample projects for implementing embedded TCP/IP communication. This release note describes the package structure, development requirements, and updates in the current version.
|
|
| 发行说明 |
PDF
236 KB
The Modbus Sample Program for the RZ/T2M and RZ/T2ME Group has been verified with Renesas Evaluation boards and supports dual-core configurations. It enables Modbus communication with major development environments. This release note describes the package structure and supported tools.
|
|
| 应用说明 |
PDF
1.64 MB
The Modbus TCP Sample Program for the RZ/T2M and RZ/T2ME Group provides a reference implementation of Modbus TCP functionality using an adapted Modbus protocol stack. This application note describes the procedure to set up, build, and run the sample program, including project configuration for e² studio and IAR Embedded Workbench, hardware setup, and communication with a Modbus TCP client.
|
|
| 应用说明 |
PDF
4.25 MB
日本語
The lwIP (lightweight IP) Protocol Stack Sample Software for the RZ/T2M, RZ/T2ME, RZ/N2L, and RZ/T2L Groups provides a reference implementation of embedded TCP/IP communication using the lwIP stack. This application note outlines setup and execution procedures and introduces sample demonstrations such as an echo server, SNTP client, and iperf-based performance measurement.
|
|
| 应用说明 |
PDF
1.04 MB
日本語
Systematically presents key design points for board design. This hardware design guide utilizes RZ/T2M, RZ/T2ME, RZ/T2L, and RZ/N2L, covering essential topics such as power supply, startup sequence, reset circuits, and connection methods for interfaces including flash memory, Ethernet, USB2.0, and ADC. It provides practical recommendations for reliable operation and noise immunity, emphasizing power separation, equal wiring lengths, and optimal placement of bypass capacitors.
|
|
| 应用说明 |
PDF
2.04 MB
日本語
The example of separating loader program and application program projects shows how the loader program transfers the application program stored in external flash memory into RAM. The loader performs initialization after reset, copies the application according to the loader table. The application starts in RAM, configures peripherals, and toggles LEDs using software interrupt. The structure supports multiple development environments and allows memory layout adjustments for flexible system design.
|
|
| 快速入门指南 |
PDF
14.98 MB
The Renesas Flexible Software Package (FSP) is an enhanced software package designed to deliver user-friendly, scalable, high-quality software for embedded system designs. FSP provides hardware abstraction layer (HAL) drivers and board support packages (BSP), enabling efficient project creation, configuration, and debugging. The guide covers evaluation board setup, initial project validation with Blinky, multicore support, toolchain selection, and debugging steps.
|
|
| 发行说明 |
PDF
267 KB
The RZ/T2M, RZ/T2ME example program package is a collection of sample programs that allow users to verify the operation of various functions and modules on the target device within the FSP environment. This is the release note for the example program running on the RZ/T2M, RZ/T2ME.
|
|
| 发行说明 | RZ/T2ME Group Security Solution package
The Security Solution Package for RZ/T2ME provides resources for implementing and evaluating security features, including a user manual, cryptographic library, secure boot, and firmware update sample programs. It also describes board/device compatibility and known issues. This is the release note for the Security Solution Package.
|
|
| 应用说明 | RZ/T2ME Group On the Fly Decryption Application Note
On-The-Fly Decryption (OTFD) for RZ/T2ME enables secure execution of encrypted programs from external flash by decrypting in real time. It protects confidential code and supports direct execution, but can't detect tampering. Combining OTFD with Secure Boot ensures integrity.
|
|
| 其他 |
PDF
303 KB
日本語
RZ/T2ME EDG (Easy Download Guide) is a structured collection of essential resources designed to support the development and evaluation of the RZ/T2ME MPU. It provides organized access to key documents, instructional videos, and sample programs for each development phase, allowing users to efficiently obtain the information relevant to their specific needs.
|
|
| 应用说明 | PDF 325 KB | |
| PCB 设计文件 | ZIP 70.42 MB | |
| 工具新闻 - 发布公告 | PDF 343 KB 日本語 | |
| 应用说明 |
PDF
2.23 MB
日本語
AI 生成的摘要:
The sample application implements IEEE 1588-2019 (PTPv2) for high-precision clock synchronization on the RZ/T2ME Starter Kit using the Linux PTP library and Ethernet Switch module. It supports best master clock selection, two delay measurement mechanisms (End-to-End and Peer-to-Peer), and two time distribution methods (one-step and two-step clocks). The application logs operation status via UART and outputs clock waveforms through GPIO for verification. Development environments include EWARM and e² studio. The package includes project files and application notes in English and Japanese.
|
|
| 发行说明 | PDF 183 KB | |
| 应用说明 |
PDF
718 KB
AI 生成的摘要:
Instructions guide converting Flexible Software Package (FSP) configurations to run RZ/T2M sample code on RZ/T2ME devices. It covers setting up the Renesas Starter Kit+ for RZ/T2ME, software requirements including IDEs, compilers, and emulators, and detailed steps to modify FSP configurations and source code for compatibility. The document also references related resources such as sample codes and patches needed for debugging with IAR Embedded Workbench. It ensures smooth migration between RZ/T2M and RZ/T2ME platforms by addressing hardware and software adjustments.
|
|
| 其他 | PDF 99 KB | |
28 项目
|
||
设计和开发
软件与工具
软件与工具
| Software title
|
Software type
|
公司
|
|---|---|---|
| 快速连接平台 快速连接平台通过提供兼容的硬件和软件构建模块，实现快速原型设计。
|
Software and Hardware Development Tools | 瑞萨电子 |
| IAR Embedded Workbench for Arm IAR Embedded Workbench for Arm 是 IAR 为 Arm 开发环境打造的一体化嵌入式开发平台，它拥有完善的工具链，涵盖高度优化的 C/C++ 编译器、调试器和分析工具等。
|
IDE and Coding Tool | IAR Systems |
| RZ Flexible Software Package (FSP) RZ FSP 是一款增强型软件包，旨在为基于瑞萨电子 RZ 系列 Arm 微处理器的嵌入式系统设计提供用户友好、可扩展的高质量软件。
|
Software Package | 瑞萨电子 |
3 项目
|
||
样例程序
样例程序
筛选
|
||
|---|---|---|
| 类型 | 文档标题 | 日期 日期 |
| 示例代码 | RZ/T2ME-RSK Example Project Bundle
Demonstrates how to write code using various unified Renesas RZ Flexible Software Package (FSP) v4.x.x modules supported by the RZT2ME-RSK. The unified RZ FSP consolidates all previous family‑specific FSPs into a single package and provides an optimized, easy‑to‑use, scalable, high‑quality software solution for embedded system design.
|
|
| 示例代码 | RZ/T2, RZ/N2 EtherCAT Sample Program Package
[Software=RZ FSP|v4.0.0],[Toolchains=Arm GNU Toolchain|13.3.Rel1;IAR Embedded Workbench for ARM v9.60.3]
ZIP
42.66 MB
Compiler:
GNU ARM Embedded, ICCARM
IDE:
e2 studio, IAR EWARM
The EtherCAT sample program for the RZ/T and RZ/N Series enables testing of the SubDevice function using EtherCAT stack code. Designed for Renesas evaluation boards, it includes source code for IAR Embedded Workbench for Arm (EWARM) and e2 studio, as well as application notes and release notes for the sample program.
|
|
| 示例代码 | RZ/T2, RZ/N2 EtherNet/IP OpENer Sample Program Package
[Software=RZ FSP|v4.0.0],[Toolchains=Arm GNU Toolchain|13.3.Rel1;IAR Embedded Workbench for ARM v9.60.3]
ZIP
14.20 MB
Compiler:
GNU ARM Embedded, ICCARM
IDE:
e2 studio, IAR EWARM
The EtherNet/IP™ OpENer sample program package for the RZ/T and RZ/N series enables evaluation of EtherNet/IP adapter communication using the OpENer stack ported to these devices. Designed for Renesas evaluation boards and RSK boards, the package includes source code projects for IAR Embedded Workbench for Arm (EWARM) and e² studio, along with a quick start guide and a release note.
|
|
| 示例代码 | RZ/T2M, RZ/T2ME Group lwIP Protocol Stack Sample Program Package
[Software=RZ FSP|v4.0.0],[Toolchains=Arm GNU Toolchain|13.3.Rel1;IAR Embedded Workbench for ARM v9.60.3]
ZIP
9.61 MB
Compiler:
GNU ARM Embedded, ICCARM
IDE:
e2 studio, IAR EWARM
The lwIP (lightweight IP) Protocol Stack Sample Program for the RZ/T2M, RZ/T2ME Group provides reference sample code for embedded TCP/IP communication using lwIP and FreeRTOS. Designed for Renesas Starter Kit (RSK), it includes sample projects for popular development environments and provides flexible integration options for various application needs.
|
|
| 示例代码 | RZ/T2M and RZ/T2ME Group Modbus Sample Program Package
[Software=RZ/T2 FSP|v4.0.0],[Toolchains=Arm GNU Toolchain|13.3.Rel1;IAR Embedded Workbench for ARM v9.60.3]
ZIP
3.43 MB
Compiler:
GNU ARM Embedded, ICCARM
IDE:
e2 studio, IAR EWARM
The Modbus sample program for the RZ/T2M and RZ/T2ME group enables testing of Modbus TCP server functionality. Designed for Renesas RSK boards, it includes source code for IAR Embedded Workbench for Arm (EWARM) and e2 studio, as well as application notes and release notes for the sample program.
|
|
| 示例代码 | RZ/T2M RZ/T2ME Group Example of Separating Loader and Application Program Projects
[Software=RZ/T2 FSP|v3.0.0],[Toolchains=GNU ARM Embedded Toolchain|13.3.1.arm-13-24;IAR Embedded Workbench for ARM v9.60.3]
ZIP
4.31 MB
日本語
应用:
工业
Compiler:
GNU ARM Embedded, ICCARM
Function:
Application Example, BSP
IDE:
e2 studio, IAR EWARM
The example of separating loader program and application program projects shows how the loader program transfers the application program stored in external flash memory into RAM. The loader performs initialization after reset, copies the application according to the loader table. The application starts in RAM, configures peripherals, and toggles LEDs using software interrupt. The structure supports multiple development environments and allows memory layout adjustments for flexible system design.
|
|
| 示例代码 | RZ/T2M, RZ/T2ME Example program V3.00 (Deprecated)
[Software=RZ/T2 FSP|v2.0],[Toolchains=GNU ARM Embedded|v12.2.Rel1.1;IAR Embedded Workbench for ARM v9.50.1]
ZIP
24.43 MB
应用:
工业
Compiler:
GCC, ICCARM
Function:
Software Package
IDE:
e2 studio, IAR EWARM
The RZ/T2M, RZ/T2ME example program package is a collection of sample programs that allow users to verify the operation of various functions and modules on the target device within the FSP environment. This package includes source code for both IAR Embedded Workbench and e2 studio, as well as concise documentation explaining the operation of each module.
|
|
| 示例代码 | RZ/T2ME Group Security Solution package
[Software=RZ/T2 FSP|v3.0.0],[Toolchains=GNU Arm Embedded|v13.3.Rel1;IAR Embedded Workbench for ARM|v9.60.3]
ZIP
33.80 MB
Compiler:
GNU ARM Embedded, ICCARM
IDE:
e2 studio, IAR EWARM
The Security Solution Package for RZ/T2ME provides resources for implementing and evaluating security features, including a user manual, cryptographic library, secure boot, and firmware update sample programs. It also describes board/device compatibility and known issues.
|
|
| 示例代码 | RZ/T2ME Group On The Fly Decryption
[Software=RZ/T2 FSP|v3.0.0],[Toolchains=GNU Arm Embedded|v13.3.Rel1;IAR Embedded Workbench for ARM|v9.60.3]
ZIP
23.90 MB
Compiler:
GNU ARM Embedded, ICCARM
Function:
Security
IDE:
e2 studio, IAR EWARM
On-The-Fly Decryption (OTFD) for RZ/T2ME enables secure execution of encrypted programs from external flash by decrypting in real time. It protects confidential code and supports direct execution, but can't detect tampering. Combining OTFD with Secure Boot ensures integrity. The sample includes OTFD and Secure Boot demos, setup guides, key tools. AES-CTR (128/256-bit) is supported; docs explain setup and usage.
|
|
| 示例代码 | RZ/T2ME Group IEEE 1588-2019 Sample application
|
|
| 示例代码 | RZ/T2ME Group Release Note for RZ/T2ME Example program V2.00
[Software=RZ/T2 FSP|v2.1.0],[Toolchains=GNU ARM Embedded Toolchain|v12.2.Rel 1;IAR Embedded Workbench for ARM v9.60.1]
ZIP
948 KB
Compiler:
GCC
IDE:
e2 studio, IAR EWARM
|
|
11 项目
|
||
产品选项
| 器件号 | 状态 | 库存 | 预算价格（美元） | Sampleable |
|---|---|---|---|---|
| RTK9RZT2M1S00000BE | Active | 缺货 | 1u | $377.65 | N/A |
视频和培训
本视频概述了 FSP 配置中的所有选项卡。 [PIN] 除外，此部分已在引脚配置功能视频中介绍。
相关资源
FSP 链接
开发板链接
用户手册链接
视频链接
