概览
描述
The ISL9113A provides a power supply solution for devices powered by three-cell alkaline, NiCd, NiMH, or one-cell Li-Ion/Li-Polymer batteries. It offers either a fixed 5V or an adjustable output option for USB-OTG or portable HDMI applications. The device is guaranteed to supply 500mA from a 3V input and 5V output, and has a typical 1. 3A peak current limit. High 1. 8MHz switching frequency allows for the use of tiny, low-profile inductors, and ceramic capacitors to minimize the size of the overall solution. The ISL9113A is an internally compensated, fully integrated synchronous converter optimized for efficiency with minimal external components. At light load, the device enters Skip mode and consumes only 20μA of quiescent current, resulting in higher efficiency at light loads and maximum battery life. The device is available in an 8 Ld DFN package.
特性
- Up to 95% efficiency at typical operating conditions
- Input voltage range: 0.8V to 4.7V
- Output current: Up to 500mA (VBAT = 3.0V, VOUT = 5.0V)
- Low quiescent current: 20μA (typical)
- Logic control shutdown (IQ < 1μA)
- 1.2V EN high logic
- Output disconnect during shutdown
- Skip mode under light-load condition
- Undervoltage lockout
- Fault protection: OVP, OTP, short-circuit
- 8 Ld 2mmx2mm DFN Package
产品对比
应用
设计和开发
开发板与套件
评估
Synchronous Boost Converter with 1.3A Switch Evaluation Board
The ISL9113ERAZ-EVZ (WLCSP) evaluation board is used to evaluate the ISL9113 low input voltage and high-efficiency synchronous boost converter. The ISL9113 provides a power supply solution for devices powered by 3-cell alkaline, NiCd, NiMH, or 1-cell Li-ion/Li-polymer batteries. The device uses...
Recommended Documents:
评估
Synchronous Boost Converter with 1.3A Switch Evaluation Board
The ISL9113ER7Z-EVZ evaluation board is used to evaluate the ISL9113 low input voltage and high-efficiency synchronous boost converter. The ISL9113 provides a power supply solution for devices powered by 3-cell alkaline, NiCd, NiMH, or 1-cell Li-ion/Li-polymer batteries. The device uses Renesas'...
Recommended Documents:
开发
ASi-5 多传感器网络开发套件
EU036-MULTISENSEVZ 概念验证板展示了通过 ASi-5 快速读取来自众多传感器的数据，并将数据快速写入其他微控制器单元的能力。 电路板上支持的传感器可测量空气或液体流速、相对湿度、温度、室内或室外空气质量、距离、SpO2/心率或客户自己的模拟传感器。 EU036-MULTISENSEVZ 的辅助材料包括原理图、BOM 和大量演示软件。 使用您最喜爱的瑞萨 MCU 和/或 ASi-5 总线快速启动多传感器开发！
Recommended Documents:
远程测试该板卡
该板卡已上线云上实验室（Lab on the Cloud)，使用我们的 PC 图形界面，无需实体板卡，便可在虚拟实验室中立即开始配置和测试设计。
模型
ECAD 模块
点击产品选项表中的 CAD 模型链接，查找 SamacSys 中的原理图符号、PCB 焊盘布局和 3D CAD 模型。如果符号和模型不可用，可直接在 SamacSys 请求该符号或模型。
产品选项
当前筛选条件
视频和培训
新闻和博客
博客
2020年10月12日
|