跳转到主要内容

特性

  • Up to 95% efficiency at typical operating conditions
  • Input voltage range: 0.8V to 4.7V
  • Output current: Up to 500mA (VBAT = 3.0V, VOUT = 5.0V)
  • Low quiescent current: 20μA (typical)
  • Logic control shutdown (IQ < 1μA)
  • Fixed 5V, 5.1V or adjustable output
  • 1.2V EN high logic
  • Output disconnect during shutdown
  • Skip mode under light load condition
  • Undervoltage lockout
  • Fault protection: OVP (ADJ version only), OTP, short circuit
  • 8 Ld 2mmx2mm DFN package and 6 bump 0.8mmx1.36mm WLCSP

描述

The ISL9113 provides a power supply solution for devices powered by three-cell alkaline, NiCd, NiMH or one-cell Li-Ion/Li-Polymer batteries. It offers either a fixed 5V or an adjustable output option for USB-OTG or portable HDMI applications. The device is guaranteed to supply 500mA from a 3V input and 5V output and has a typical 1.3A peak current limit. High 1.8MHz switching frequency allows for the use of tiny, low-profile inductors and ceramic capacitors to minimize the size of the overall solution.

The ISL9113 is an internally compensated, fully integrated synchronous converter optimized for efficiency with minimal external components. At light load, the device enters skip mode and consumes only 20μA of quiescent current, resulting in higher efficiency at light loads and maximum battery life. The device is available in an 8 Ld DFN package and a 6 bump WLCSP.

产品参数

属性
Outputs (#) 1
Topology [Rail 1] Boost
Input Voltage (Min) [Rail 1] (V) 0.8
Input Voltage (Max) [Rail 1] (V) -
Output Voltage (Max) [Rail 1] (V) 5.2
Output Current (Max) [Rail 1] (A) 0.5
Switching Frequency Range (Typical) (kHz) -
Peak Efficiency (%) 95
IQ [Rail 1] (µA) 20
SYNCH Capability No
POR No
Control Type Current Mode
Input Voltage (Min) (V) 0.8
Input Voltage (Max) (V) 4.7
Output Voltage (Min) (V) 1
Output Voltage (Max) (V) 5.2
Quiescent Current 20 µA
Switching Frequency (KHz) -
Qualification Level Standard

封装选项

Pkg. Type Pkg. Dimensions (mm) Lead Count (#) Pitch (mm)
DFN 2.0 x 2.0 x 0.90 8
WLCSP-BP 0.8 x 1.4 x 0.00 6 0.4

应用方框图

Infusion Level Monitor Using Capacitive Touch Sensing Block Diagram
电容式触控输液液位监测仪
输液监测仪可监测液位,在各种液罐应用场景中提供可靠的警报。
Smart Grid Fault Indicator Unit Block Diagram
智能电网故障指示器单元
低功耗智能电网故障指示器,具有高性能 MCU 和高效监控功能。

其他应用

  • Products including portable HDMI and USB-OTG
  • Smartphones
  • Tablet and mobile internet devices

当前筛选条件

新闻和博客