GreenPAK SLG46826 (STQFN-20) Development Kit with Socket Adapter
The SLG46826V-SKT includes the SLG4SA20SP-20x30 socket adapter and 50 SLG46826V (STQFN-20) samples.
概览
简介
The SLG46826 provides a small, low power component for commonly used mixed-signal functions. The user creates the circuit design by programming the multiple time Non-Volatile Memory (NVM) to configure the interconnect logic, the IOs and the macrocells of the SLG46826. This highly versatile device allows a wide variety of mixed-signal functions to be designed within a very small, low power single integrated circuit.
特性
- In-System Programmability
- Multiple Time Programmable Memory
- Wide Range Power Supply
- 2.5 V (±8%) to 5 V (±10%) VDD
- 1.8 V (±5%) to 5 V (±10%) VDD2 (VDD2 ≤ VDD)
- Operating Temperature Range: -40°C to 85°C
- RoHS Compliant / Halogen-Free
Macrocells Overview
- Two High Speed General Purpose Rail-to-Rail Analog Comparators (ACMPxH);
- Two Low Power General Purpose Rail-to-Rail Analog Comparators (ACMPxL);
- Two Voltage References (Vref)
- Two Vref Outputs;
- Eleven Combination Function Macrocells:
- Three Selectable DFF/Latch or 2-bit LUTs;
- One Selectable Programmable Pattern Generator or 2-bit LUT;
- Six Selectable DFF/Latch or 3-bit LUTs;
- One Selectable Pipe Delay or Ripple Counter or 3-bit LUT;
- Eight Multi-Function Macrocells:
- Seven Selectable DFF/Latch or 3-bit LUTs + 8-bit Delay/Counters;
- One Selectable DFF/Latch or 4-bit LUT + 16-bit Delay/Counter;
- Serial Communications:
- I2C Protocol Interface;
- 2-Kbit (256 x 8) I2C-Compatible (2-Wire) Serial EEPROM emulation with Software Write Protection;
- Programmable Delay with Edge Detector Output;
- Deglitch Filter with Edge Detector;
- Three Oscillators (OSC):
- 2.048 kHz Oscillator;
- 2.048 MHz Oscillator;
- 25 MHz Oscillator;
- Analog Temperature Sensor;
- Power On Reset (POR).
产品对比
应用
- Personal Computers and Servers
- PC Peripherals
- Consumer Electronics
- Data Communications Equipment
- Handheld and Portable Electronics
设计和开发
软件与工具
软件与工具
| Software title
|
Software type
|
公司
|
|---|---|---|
| Go Configure Software Hub Go Configure Software Hub 为各种产品提供开发支持，包括 GreenPAK 可配置混合信号矩阵和 ForgeFPGA™ 器件。
|
Software Package | 瑞萨电子 |
1 item
|
||
开发板与套件
GreenPAK SLG46826 20-pin DIP Prototyping Board
The SLG46826V-DIP 20-pin DIP Prototyping Board is perfect for breadboarding and fast prototypes. It requires the DIP Adapter (SLG4SA-DIP) to use it with the Advanced...
GreenPAK SLG46826 (TSSOP-20) Development Kit with Socket Adapter
The SLG46826G-SKT includes the SLG4SA20-65x64 socket adapter and 50 SLG46826G (TSSOP-20) samples.
Training Adapter Board for SLG46826
The SLG4TA20SP-SLG46826 is a training adapter board for the SLG46826 programmable mixed-signal matrix with in-system programmability.
GreenPAK DIP Adapter for GreenPAK Advanced Development Board
The GreenPAK DIP Adapter for the GreenPAK Advanced Development Board allows using the SLG46xxxV-DIP and SLG47xxxV-DIP Proto boards with the GreenPAK Advanced...
GreenPAK 高级开发板
GreenPAK 高级开发板为 GreenPAK 器件提供完整的编程、仿真和测试功能 - 适用于 SLG46xxxX-SKT / SLG47xxxV-SKT 插座套件。
它与 GreenPAK Designer 软件（内置于 Go Configure™ Software Hub...
可在云上实验室使用
使用我们基于 PC 的 GUI，无需物理板即可在虚拟实验室中立即开始配置和测试设计
GreenPAK Serial Debugger Board (GSD)
GreenPAK Serial Debugger (GSD) device can be used for programming GreenPAK products with multiple-time Non-Volatile Memory (NVM) or for configuring the interconnect...
GreenPAK 入门套件
SLG4DVKINTRO GreenPAK 入门套件非常适合新客户评估。
GreenPAK 入门套件包括：
- SLG4DVKADV GreenPAK 高级开发板
- 用于GreenPAK高级开发板的SLG4SA-DIP适配器
- 以下 DIP 原型板：
- 2x SLG46120V-DIP
- 2x SLG46721V-DIP
- 2x SLG46620V-DIP
- 2x...
GreenPAK Lite 开发板
GreenPAK Lite 开发板为 GreenPAK 设备提供完整的编程、仿真和测试功能，与 Go Configure™ 软件中心配对工作。 板卡功能由瑞萨电子的 RX66T MCU 提供。
具备成本优化功能集的 IO-Link 设备收发器评估板
CCE4503-EVAL-V3 评估板的设计用于评估和演示 CCE4503 IO-Link 设备收发器。
CCE4503 是一款易于使用的 IO-Link 兼容收发器。 它符合 IO-Link 标准的通信功能结合了高级保护电路和其他附加功能，并且整个设备简易又小巧。
具有集成帧处理器的 IO-Link 物理层设备评估板
CCE4502-EVAL-V4 评估板的设计可用于评估 CCE4502 这款具有集成帧处理器的 IO-Link 物理层设备。
CCE4502 是一款高度集成的 IO-Link 设备类兼容收发器 IC。 内置的基于硬件的 IO-Link 帧处理器提供完整的 IO-Link 通信协议处理功能，让 UART...
GreenPAK Programmable Mixed-signal Matrix Evaluation Board
The QCIOT-SLG46826POCZ evaluation board enables quick prototyping of the GreenPAK™ SLG46826V programmable mixed-signal matrix. The QCIOT-SLG46826POCZ board is a part of...
GreenPAK 入门套件 Lite
SLG4DVKLITEINTRO GreenPAK™ 入门套件是非常适合给使用 GreenPAK 可编程混合信号产品的客户去启动新的开发。
GreenPAK 入门套件包括：
- 附有 USB...
模型
ECAD 模块
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on products in the Product Options table. If a symbol or model isn't available, it can be requested directly from the website.
此为出厂可配置设备。试用自定义部件配置工具。
Processing table
Tips for Using This Parametric Table:
- Hide Filters button in header: Collapse or expands filters
- Column sort buttons in header: Sort Column alphabetically / numerically descending or ascending
- Reset button in header: Reset all filters to the page default
- Full Screen button in header: Expand the table to full screen view (user must close out of full screen before they can interact with rest of page)
- Export button in header: Export the filtered results of the table to an Excel document
- Filter parts search bar in header: Type to filter table results by part number
- Hide column button in column headers: Select to hide columns in table
- AND / OR toggle switches in header: Toggles the logic of this particular filter to be “AND” or “OR” logic for filtering results
- Multiselect checkboxes at beginning of each row in table: Select these checkboxes to compare products against each other
- Document icon next to product name in row: View the featured document for this product
- Chip icon next to the right of the document icon in row: View the block diagram for this product
- Cart icon to the right of the chip icon: Indicates that samples are available for this product
视频和培训
GreenPAK I2C
Video List
