概览
描述
The SLG46117 combines the functionality and versatility of a programmable mixed-signal matrix with the capabilities of Renesas' Copper-based Field-Effect Transistor (CuFET) technology. Capable of integrating a number of common discrete ICs and passive components into a single device, the GreenPAK family’s SLG46117 enables high power switching with a soft-start 1.25A P-Channel MOSFET with slew rate control and integrated discharge resistor.
特性
- Logic and Mixed Signal Circuits
- Highly Versatile Macrocells
- Read Back Protection (Read Lock)
- 1.8V (±5%) to 5V (±10%) Supply
- Operating Temperature Range -40 °C to 85 °C
- Soft-Start 1.25A P-FET Power Switch with discharge
- Pb-Free/Halogen-Free/RoHS compliant
- Macrocells Overview
- Two Analog Comparators (ACMP)
- Voltage References (Vref)
- Four Combinatorial Look-Up Tables (LUTs)
- Two 2-bit LUTs
- Two 3-bit LUTs
- Seven Combination Function Macrocell
- Two Selectable DFF/Latch or 2-bit LUTs
- Two Selectable DFF/Latch or 3-bit LUTs
- One Selectable Pipe Delay or 3-bit LUT
- Pipe Delay – 8 stage/2 output
- One Selectable Counter/Delay or 4-bit LUT
- One Programmable Delay/Deglitch Filter
- Three Counter/Delay Generators (CNT/DLY)
- Three 8-bit counter/delays with external clock/reset
- Four D Flip-Flop/Latches (DFF) (Part of Combination Function Macrocell)
- Pipe Delay – 8 stage/2 output (Part of Combination Function Macrocell)
- Trimmed RC Oscillator (RC OSC)
- Power-On Reset (POR)
- One Bandgap
- Soft-Start P-FET Power Switch
- Power Switch IDS: 1.25A
- Slew Rate Control
- VIN: 1.5V to 5.5V
- Integrated Discharge Resistor
- Low RDSON
- 28.5mΩ at 5.0V
- 36.4mΩ at 3.3V
- 44.3mΩ at 2.5V
- 60.8mΩ at 1.8V
- 77.6mΩ at 1.5V
产品对比
应用
文档
|
|
|
---|---|---|
类型 | 文档标题 | 日期 |
数据手册 | PDF 1.37 MB | |
宣传手册 | PDF 12.71 MB 日本語 | |
器件勘误表 | PDF 1.03 MB | |
应用说明 | PDF 363 KB | |
应用说明 | PDF 255 KB | |
5 items
|
设计和开发
开发板与套件
GreenPAK SLG46117 Development Kit with Socket Adapter
The SLG46117V-SKT is a socket adapter kit for use with the SLG4DVKADV GreenPAK Advanced Development Board or SLG4DVKLITE GreenPAK Lite Development Board. The SLG46117V-SKT kit includes the SLG4SA14-16x25 socket adapter and 50 SLG46117V GreenPAK programmable mixed-signal matrix IC samples.
Used...
GreenPAK SLG46117 20-Pin DIP Prototyping Board
The SLG46117V-DIP 20-pin DIP prototyping board is perfect for breadboarding and fast prototypes. It requires the DIP Adapter (SLG4SA-DIP) to use it with the Advanced Development Board.
GreenPAK 高级开发板
GreenPAK 高级开发板为 GreenPAK 器件提供完整的编程、仿真和测试功能 - 适用于 SLG46xxxX-SKT / SLG47xxxV-SKT 插座套件。
它与 GreenPAK Designer 软件(内置于 Go Configure™ Software Hub 中)协同工作,并允许设计人员:
- 快速对自定义样品进行编程
- 在线测试GreenPAK项目
- 使用任 一 GreenPAK 器件进行开发
套件包含
- 高级开发板
- USB 线材
- 快速入门指南
请注意:插座适配器应单独订购
Test this Board Remotely
GreenPAK DIP Adapter for GreenPAK Advanced Development Board
The GreenPAK™ DIP Adapter for the GreenPAK Advanced Development Board allows for using the SLG46xxxV-DIP and SLG47xxxV-DIP prototyping boards with the GreenPAK Advanced Development Board. It acts as the bridge between the advanced and DIP development platforms.
GreenPAK Lite 开发板
GreenPAK Lite 开发板为 GreenPAK 设备提供完整的编程、仿真和测试功能,与 Go Configure™ 软件中心配对工作。 板卡功能由瑞萨电子的 RX66T MCU 提供。
RZ/N2L 工业网络 SOM 套件
YCONNECT-IT-RZN2L 是一款紧凑型开发套件,用于评估使用工业以太网与 RZ/N2L MPU 通信的应用。 该套件包含两个预组装的电路板,分别为“Stamp 模块”和“载板”。
该套件提供 EtherCAT、EtherNet/IP 和 Modbus 的示例软件。 有了千兆位 PHY,该套件就能很好地支持基于 TSN 的实时以太网通信。
此外,该套件还安装了 Pmod 和 Arduino 等标准接口以及主机接口(QSPI从机),可轻松连接到应用MCU板。
注:YCONNECT-IT-RZN2L 存在两个板卡版本(V2 和 V3)。请通过模块上的丝印标识确认板卡版本。
Test this Board Remotely
模型
ECAD 模块
点击产品选项表中的 CAD 模型链接,查找 SamacSys 中的原理图符号、PCB 焊盘布局和 3D CAD 模型。如果符号和模型不可用,可直接在 SamacSys 请求该符号或模型。

产品选项
当前筛选条件