特性
- Ultra-low current consumption
- 9V or 3V to 5V battery operation
- LDO for microcontroller supply
- 10-bit ADC for measuring voltage on 7 analog pins
- Drives two LED emitters with 8-bit current DAC control from 45mA to 600mA
- Two photodiode receivers with programmable gain amplifiers
- General purpose IO
- Horn driver with clamp diodes
- SPI interface
描述
The RAA239101 is a low-power Analog Front-End (AFE) IC; combined with a microcontroller, photoelectric emitter/detector(s), horn, and minimal external components, it forms a complete smoke detector.
The IC operates from a 3V to 5V or 9V battery and has an LDO to provide power to a microcontroller. The battery-check feature can be used to signal an alarm when the battery is low.
The RAA239101 provides a driver that can switch between two LEDs to pulse the smoke detection LED emitters with a DAC adjustable current. Two photodiode receiver channels with programmable gain amplification using an ADC allow the detection of smoke by sensing the LED light scattered off of smoke in a detection chamber.
产品参数
| 属性 | 值 |
|---|---|
| Function | Photoelectric AFE |
| Automotive Qual. | No |
| Supply Voltage (V) | 9 - 9, 3 - 5 |
| Interface | SPI, GPIO |
| Adj. Analog Gain | 2 - 160 |
| Resolution (bits) | 10 |
| Sample Rate Max (KHz) | 100 |
| Temp. Range (°C) | -40 to +125°C |
封装选项
| Pkg. Type | Pkg. Dimensions (mm) | Lead Count (#) | Pitch (mm) |
|---|---|---|---|
| QFN | 4.0 x 4.0 x 9.00 | 32 | 0.4 |
应用方框图
完成您的设计
寻找相关的产品，完善您的设计
Renesas Boards & Kits
家用烟雾探测器开发板
光电烟雾探测器由一个红外光电二极管（发射器）和一个光电晶体管（接收器/探测器）组成，安装在所谓的“小白盒”内。 空气在盒子内流动，而空气中可能含有来自附近（早期）明火的烟雾，等等。
”小白盒“的结构可防止（日）光进入盒子，以免干扰测量。 由于发射器和探测器都位于 ~120 至 150 度的角度，因此光线不会在未受污染或“低污染”的空气中照射到传感器。 但是，如果（例如，由于烟雾或灰尘）盒子中的空气含有颗粒，光会散射，有些光会照射到探测器，从而触发声音警报（压电喇叭、蜂鸣器）。
该款烟雾探测器设计采用了瑞萨的 RAA239101 低功耗模拟前端（AFE）IC 和 RL78/G12... 阅读详情
