概览
描述
The SLG46811 programmable mixed-signal matrix IC offers an I2C serial communications bus and a multichannel sampling analog comparator, making it the smallest GreenPAK that can sample up to four analog channels.
The SLG46811 offers digital macrocells, including shift registers and a long pattern generator block, that enable the device to generate master transactions for SPI, I2C, UART, and 1-wire. Also, a small size and energy efficiency make the device ideal for a wide range of applications.
特性
- Read Back Protection (Read Lock)
- Power Supply: 2.5V (±8%) to 5V (±10%)
- Operating Temperature Range: -40°C to 85°C
- RoHS-Compliant/Halogen-Free
- Macrocells Overview
- Multichannel Sampling Analog Comparator (MS ACMP)
- Sampling up to Four Analog Channels
- Selectable Voltage Reference for Each Channel
- Different Sampling Scenarios
- Synchronous or Asynchronous Result Appearance
- Integrated Voltage Reference
- Twelve Combination Function Macrocells
- Two 2-Bit LUTs or (DFF/LATCH) Macrocells
- One Selectable Programmable Pattern Generator or 2-bit LUT
- Four 3-Bit LUTs or (DFF/LATCH) with Set/Reset
- Four Selectable DFF/LATCH or 3-bit LUTs or Shift Registers
- One 4-Bit LUT or (DFF/LATCH) with Set/Reset Macrocell
- Six Multi-Function Macrocells
- Five Selectable DFF/Latch or 3-bit LUTs + 8-bit Delay/Counters
- One Selectable DFF/Latch or 3-bit LUT + 8-bit Delay/Counter/FSM
- Extended Pattern Generator
- Up to 8 Parallel Outputs
- 92 Bytes Pattern Stored in the Non-Volatile Memory (NVM)
- I²C Communication
- Programmable Delay with Edge Detector Output
- Deglitch Filter or Edge Detector
- Two Oscillators (OSC)
- 2.048/10kHz Oscillator
- 25MHz Oscillator
- Analog Temperature Sensor
- Power-On Reset (POR) with CRC
- Multichannel Sampling Analog Comparator (MS ACMP)
产品对比
应用
文档
|
|
|
---|---|---|
类型 | 文档标题 | 日期 |
数据手册 | PDF 2.32 MB | |
应用说明 | PDF 634 KB | |
应用说明 | PDF 790 KB | |
应用说明 | PDF 558 KB | |
应用说明 | PDF 441 KB | |
应用说明 | PDF 424 KB | |
应用说明 | PDF 621 KB | |
应用说明 | PDF 876 KB | |
器件勘误表 | PDF 198 KB | |
9 项目
|
设计和开发
软件与工具
软件与工具
Software title
|
Software type
|
公司
|
---|---|---|
Go Configure Software Hub Go Configure Software Hub 为各种产品提供开发支持,包括 GreenPAK 可配置混合信号矩阵和 ForgeFPGA™ 器件。
|
Software Package | 瑞萨电子 |
1 项目
|
开发板与套件
GreenPAK SLG46811 Development Kit with Socket Adapter
The SLG46811V-SKT includes the SLG4SA12-16x16 socket adapter and 50 SLG46811V samples.
GreenPAK SLG46811 20-Pin DIP Prototyping Board
The SLG46811V-DIP 20-pin DIP prototyping board is perfect for breadboarding and fast prototypes. It requires the DIP Adapter (SLG4SA-DIP) to use it with the Advanced Development Board.
GreenPAK 高级开发板
GreenPAK 高级开发板为 GreenPAK 器件提供完整的编程、仿真和测试功能 - 适用于 SLG46xxxX-SKT / SLG47xxxV-SKT 插座套件。
它与 GreenPAK Designer 软件(内置于 Go Configure™ Software Hub 中)协同工作,并允许设计人员:
- 快速对自定义样品进行编程
- 在线测试GreenPAK项目
- 使用任 一 GreenPAK 器件进行开发
套件包含
- 高级开发板
- USB 线材
- 快速入门指南
请注意:插座适配器应单独订购
远程测试该板卡
GreenPAK DIP Adapter for GreenPAK Advanced Development Board
The GreenPAK™ DIP Adapter for the GreenPAK Advanced Development Board allows for using the SLG46xxxV-DIP and SLG47xxxV-DIP prototyping boards with the GreenPAK Advanced Development Board. It acts as the bridge between the advanced and DIP development platforms.
GreenPAK Serial Debugger Board (GSD)
The GreenPAK™ Serial Debugger (GSD) device can be used for programming GreenPAK programmable mixed-signal matrix IC products with multiple-time non-volatile memory (NVM) or for configuring the interconnect logic, the IOs, and the macrocells of all GreenPAK chips with an I²C interface. This...
GreenPAK Lite 开发板
GreenPAK Lite 开发板为 GreenPAK 设备提供完整的编程、仿真和测试功能,与 Go Configure™ 软件中心配对工作。 板卡功能由瑞萨电子的 RX66T MCU 提供。
模型
ECAD 模块
点击产品选项表中的 CAD 模型链接,查找 SamacSys 中的原理图符号、PCB 焊盘布局和 3D CAD 模型。如果符号和模型不可用,可直接在 SamacSys 请求该符号或模型。

产品选项
当前筛选条件