概览
描述
MCK-RX26T 是一款便于评估使用永磁同步电机（无刷直流电机）的电机控制的开发套件。
通过使用本产品以及可从网站下载的样例程序和QE for Motor，即刻开始使用RX26T进行电机控制评估。
特性
- CPU 板搭载 RX26T 作为电机控制 MCU。
- 用于 3 相 BLDC 电机（额定功率 48V/10A）的逆变板
- 用于 RX26T 闪存编程的板载调试器
- 支持单分流/三分流方式电流检测
- 过载电流检测
- 可适用电机控制开发支持工具“Renesas Motor Workbench”
- 通过将 PC 和 CPU 板进行电气隔离的通信板，实现安全的电机控制评估和调试工作
- 包含的组件
- RX26T CPU 板 (MCB-RX26T Type A)
- 变频器电路板 (MCI-LV-1)
- 通信板 (MC-COM)
- 永磁同步电机
- 配件（电缆、垫片等）
应用
文档
相关文档
请登录后开启订阅
|
|
|
|
|---|---|---|
| 类型 | 文档标题 | 日期 |
| 手册 - 开发工具 |
PDF
1.59 MB
日本語
MCK-RX26T is a motor control evaluation kit. It supports brushless DC motors with 1, 2, or 3-shunt current sensing and includes an overcurrent protection function. The kit is compatible with the Motor Control Development Support Tool (Renesas Motor Workbench). This manual provides essential information for using the board, including specifications and jumper settings, as well as software design details such as function descriptions and pin assignment information for interface connectors.
|
|
| 快速入门指南 |
PDF
1.40 MB
日本語
To connect the MCK-RX26T board, power it on, and operate the switches, simply follow the procedure described in this guide. It also outlines the steps for executing the program pre-installed on the CPU board and explains how to write a new program. By following these instructions, users can easily drive motors using this product.
|
|
| 工具新闻 - 发布公告 | PDF 358 KB 日本語 | |
| 应用说明 |
PDF
3.00 MB
日本語
This sample program provides a vector control (Hall Field Oriented Control, FOC) function that uses a threephase permanent magnet synchronous motor (PM motor) equipped with a Hall sensor as a position, speed and rotary direction detector over the whole speed range from standstill to low, middle, and high speed. Hall sensor can be viewed as a low-resolution encoder.
|
|
| 应用说明 |
PDF
5.07 MB
日本語
Provide various control algorithms primarily featuring PM sensorless vector control functions and flying start functions for RA family/RX family CPU boards and the Renesas Electronics inverter MCI-LV-1.
|
|
| 应用说明 |
PDF
3.21 MB
日本語
This sample project enables vector control of a permanent magnet synchronous motor (PMSM). Current detection for vector control supports both 2-shunt and 1-shunt resistor methods.
|
|
| 应用说明 |
PDF
3.47 MB
日本語
This sample program enables vector control of an encoder-equipped permanent magnet synchronous motor (PMSM).
|
|
| 应用说明 |
PDF
12.71 MB
日本語
By using the FIT module, users can easily incorporate firmware update functionality and secure boot functionality into their applications.
The firmware update module provides middleware that functions as a component when adding firmware update functionality to the user's system.
|
|
| 工具新闻 - 发布公告 |
PDF
150 KB
日本語
This is a Tool News announcing the revision of QE for Motor V1.5.1, Development Assistance Tool for Motor Applications.
QE for Motor is a development support tool that supports the development of embedded systems for motors that can be tuned and analyzed in conjunction with Renesas Motor Workbench, in addition to configuring the motor middleware and related drivers of Renesas microcontrollers.
The main revision upgrades is support for MCK-RA6T2 Version 2.
|
|
| 工具新闻 - 发布公告 | PDF 596 KB 日本語 | |
| 应用说明 |
PDF
2.77 MB
日本語
This sample program provides a software that can drive 3-phase interior permanent magnet (IPM) motor using sensorless vector control (Sensorless FOC) over the whole speed range from standstill to low, middle, and high speed ranges.
|
|
| 应用说明 |
PDF
2.32 MB
日本語
AI 生成的摘要:
This sample program enables vector control of two permanent magnet synchronous motors (PMSM) using a Renesas RX26T microcontroller.
|
|
| PCB 设计文件 | MCK-RX26T Design Package
The design files for the MCK-RX26T include the schematic, BOM lists, and Gerber data for the board layout. These files are essential for board design and manufacturing, enabling a more detailed evaluation of the board.
|
|
| 工具新闻 - 发布公告 | PDF 333 KB 日本語 | |
| 应用说明 |
PDF
7.70 MB
日本語
AI 生成的摘要:
QE for Motor streamlines motor control software development by providing an integrated workflow for configuration, tuning, and analysis. It supports RA6T2 and RX26T MCU groups with flexible motor control kits and automates settings for Renesas Motor Workbench, enabling efficient motor middleware and driver configuration via GUI. The environment requires Windows 10/11, e2 studio IDE, GNU Arm toolchain, and specific Renesas software versions. Sample programs for sensorless vector control of permanent magnet synchronous motors are included. Reference manuals cover hardware and software tools to facilitate development and validation.
|
|
| 工具新闻 - 发布公告 | PDF 913 KB 日本語 | |
|
16 项目
|
||
设计和开发
软件与工具
软件与工具
| Software title
|
Software type
|
公司
|
|---|---|---|
| Renesas Motor Workbench Renesas Motor Workbench is a development support tool for debugging, analyzing, and tuning motor control programs.
|
Solution Toolkit | 瑞萨电子 |
| QE for Motor: Development Assistance Tool for Motor Applications The development assistance tool that supports the development of motor software for MCUs. It allows to configure motor middleware and drivers easily, and tune and analyze motors with Renesas Motor Workbench. [Plugin for Renesas IDE "e² studio"] [Support MCU/MPU: RA, RX, RL78]
|
Solution Toolkit | 瑞萨电子 |
2 项目
|
||
样例程序
样例程序
筛选
|
||
|---|---|---|
| 类型 | 文档标题 | 日期 日期 |
| 示例代码 | Hall sensor vector control of PM motors Rev.1.10
[Software=RX Smart Configurator|v2.25.0],[Toolchains=CC-RX|V3.07.00]
ZIP
11.41 MB
日本語
应用:
工业
Compiler:
CC-RX
Function:
Application Example
IDE:
CS+ for CC, e2 studio
This sample program provides a vector control (Hall Field Oriented Control, FOC) function that uses a threephase permanent magnet synchronous motor (PM motor) equipped with a Hall sensor as a position, speed and rotary direction detector over the whole speed range from standstill to low, middle, and high speed. Hall sensor can be viewed as a low-resolution encoder.
|
|
| 示例代码 | Sensorless Vector Control of PM Motor - Equipped with Flying Start (For MCK/MCB, RA Family/RX Family)
[Software=RA Flexible Software Package|v6.2.0],[Toolchains=CC-RX|V3.07.00;GNU Arm Embedded|13.2.1.arm-13-7]
ZIP
28.37 MB
日本語
Compiler:
CC-RX, GNU ARM Embedded
Function:
Application Example
IDE:
CS+ for CC, e2 studio
Provide various control algorithms primarily featuring PM sensorless vector control functions and flying start functions for RA family/RX family CPU boards and the Renesas Electronics inverter MCI-LV-1.
|
|
| 示例代码 | Sensorless Vector Control of a Permanent Magnet Synchronous Motor - For MCK Rev.1.20
[Software=RX Smart Configurator|v2.25.0],[Toolchains=CC-RX|V3.07.00]
ZIP
33.01 MB
日本語
应用:
工业
Compiler:
CC-RX
Function:
Application Example
IDE:
CS+ for CC, e2 studio
This sample project enables vector control of a permanent magnet synchronous motor (PMSM) using a Renesas RX26T microcontroller. Current detection for vector control supports both 2-shunt and 1-shunt resistor methods.
|
|
| 示例代码 | Vector Control for Permanent Magnet Synchronous Motor with Encoder - For MCK Rev.1.20
[Software=RX Smart Configurator|v2.25.0],[Toolchains=CC-RX|V3.07.00]
ZIP
23.96 MB
日本語
应用:
工业
Compiler:
CC-RX
Function:
Application Example
IDE:
CS+ for CC, e2 studio
This sample program enables vector control of an encoder-equipped permanent magnet synchronous motor (PMSM).
|
|
| 示例代码 | RX Family Firmware Update module Using Firmware Integration Technology Application Notes Rev.2.06 - Sample Code
[Software=RX Driver Package|V1.48],[Toolchains=CC-RX|V3.07.00;GNURX|14.2.0.202505;IAR Compiler for RX|v.5.20.1]
ZIP
156.61 MB
应用:
消费电子产品
Compiler:
CC-RX, ICCRX
Function:
Driver or Library
IDE:
e2 studio, GCC EWRX, IAR EWRX
By using the FIT module, users can easily incorporate firmware update functionality and secure boot functionality into their applications.
The firmware update module provides middleware that functions as a component when adding firmware update functionality to the user's system.
|
|
| 示例代码 | Sensorless Vector Control for IPMSM over the Whole Speed Range for MCK Rev.1.11
[Software=RX Smart Configurator|v2.25.0],[Toolchains=CC-RX|V3.07.00]
ZIP
8.25 MB
日本語
应用:
工业
Compiler:
CC-RX
Function:
Application Example
IDE:
e2 studio
This sample program provides a software that can drive 3-phase interior permanent magnet (IPM) motor using sensorless vector control (Sensorless FOC) over the whole speed range from standstill to low, middle, and high speed ranges.
|
|
| 示例代码 | Sensorless Vector Control of a Permanent Magnet Synchronous Motor - 2motor, For MCK Rev.1.01
[Software=RX Smart Configurator|v2.25.0],[Toolchains=CC-RX|V3.07.00]
ZIP
10.34 MB
日本語
应用:
工业
Compiler:
CC-RX
Function:
Application Example
IDE:
e2 studio
This sample program enables vector control of two permanent magnet synchronous motors (PMSM) using a Renesas RX26T microcontroller.
|
|
7 项目
|
||
相关评估板和套件
开发板与套件
参考设计
Dual Motor Control with Interleaved PFC for Air Conditioner Outdoor Unit Reference Design
Renesas' Air Conditioner Outdoor Unit (ODU) reference design is a total solution for controlling outdoor air conditioning units. It is used in combination with the MCI-HV-AC which is AC200V high-voltage inverter board, communication board, and peripheral devices. It is capable of evaluating and... 阅读详情
开发
Renesas Flexible Motor Control CPU Board for RX26T MCU Group
本产品是配备RX26T 的电机控制CPU板。 通过与对应的逆变板组合使用，可以简单地实现使用RX26T的电机控制。
通过将 PC 和 CPU 板进行电气隔离的通信板，实现安全的电机控制评估和调试工作。
- 支持的逆变板（套件）
MCI-LV-1 (P/N: RTK0EM0000S04020BJ) - 支持的通信板
MC-COM (P/N: RTK0EMXC90S00000BJ)
开发
Renesas Flexible Motor Control CPU Board for RX26T MCU Group with Trusted Secure IP (TSIP-Lite)
本产品是配备RX26T 的电机控制CPU板。 通过与对应的逆变板组合使用，可以简单地实现使用RX26T的电机控制。
通过将 PC 和 CPU 板进行电气隔离的通信板，实现安全的电机控制评估和调试工作。
- 支持的逆变板（套件）
MCI-LV-1 (P/N: RTK0EM0000S04020BJ) - 支持的通信板
MC-COM (P/N: RTK0EMXC90S00000BJ)
开发
Renesas Flexible Motor Control CPU Board for RX26T MCU Group
本产品是配备RX26T(P/N:R5F526TACDFM) 的电机控制CPU板。 通过与对应的逆变板组合使用，可以简单地实现使用RX26T的电机控制。
通过将 PC 和 CPU 板进行电气隔离的通信板，实现安全的电机控制评估和调试工作。
- 支持的逆变板（套件）
MCI-LV-1 (P/N: RTK0EM0000S04020BJ) - 支持的通信板
MC-COM (P/N: RTK0EMXC90S00000BJ)
开发
MCI-HV-1
有效
Renesas Flexible Motor Control Inverter Board for 100V/200V Three-Phase BLDC/Induction Motor
这是一款逆变器板，使用高压（100V/200V）BLDC/感应电机便可轻松评估电机控制。 与兼容的 CPU 板结合使用，便可立即开始评估电机控制。
支持的CPU板：MCB-RA6T2 和 MCB-RX26T-TYPE-A
支持的通信板：MC-COM
开发
MCI-HV-2-3PH
有效
Flexible Motor Control Inverter Board for Three-Phase BLDC/Induction Motor for Industrial Application, 200-240VAC 3PH Input
An inverter board that allows users to evaluate motor control using a high-voltage brushless DC (BLDC)/Induction motor at ease. By combining with a compatible CPU board, users can immediately start the evaluation of motor control.
This product supports only 3-phase AC200 - 240V 50Hz/60Hz of input... 阅读详情
开发
MCI-HV-2-1PH
有效
Flexible Motor Control Inverter Board for Three-Phase BLDC/Induction Motor for Industrial Application, 200-240VAC 1PH Input
An inverter board that allows users to evaluate motor control with ease using a high-voltage brushless DC (BLDC)/induction motor. By combining with a compatible CPU board, users can immediately start evaluating motor control.
This product supports only 1-phase AC200 - 240V 50Hz/60Hz input... 阅读详情
产品选项
| 器件号 | 状态 | 库存 | 预算价格（美元） | Description |
|---|---|---|---|---|
| RTK0EMXE70S00021BJ | Active | 缺货 | 1u | $529.41 | Renesas Flexible Motor Control Kit for RX26T MCU Group |
| RTK0EMXE70S00020BJ | Last Time Buy | 有库存 | 1u | $529.41 | Renesas Flexible Motor Control Kit for RX26T MCU Group |
视频和培训
新闻和博客
博客 2023年9月14日 |
