特性
- Integrated secondary-side protocol IC and USB type-C control for USB Power Delivery 3.1 EPR solutions and multiple D+/D- protocols
- Backwards compatible with USB PD 3.0 w/PPS
- Protocol interface
- Secondary-side regulation
- USB Type-C® NFET driver for disconnect function
- Supports USB PD 3.1 w/EPR and other RapidCharge™ protocols
- TDFN-16 5mm x 4mm package for small total solution size
- Intelligent, eco-friendly low standby power
- High resolution, accurate control over the output voltage and current
- Built-in digital loop compensation reduces external component count
- Programmable fast discharge to 5V at adapter unplug or voltage request
- Supports both DCM and CCM operation
- Rich protection for:
- Over-voltage (OVP)
- Over-current (OCP)
- User-configurable over-temperature
- USB PD-based power derating
- And many more
描述
The iW780 protocol IC is a highly flexible and programmable AC/DC interface controller that supports USB Power Delivery (PD) 3.1 and multiple D+/D- protocols. The device integrates protocol support, secondary-side regulation control and a USB Type-C® disconnect FET controller into one device for single-port and multi-port adapter designs.
The device pairs virtually with all of Renesas’s primary-side controllers including the iW9860, iW9801, and iW9802, enabling power supplies for fast charging up to 240W output power. With its integrated intelligence, the iW780 automatically enters a low power state at no-load to enable zero standby power solutions when paired with the iW9860 or the iW9870. For even higher efficiency, the device can be paired with the iW610 secondary-side synchronous rectifier controller to further increase active-mode efficiency.
Designed for multi-port applications, multiple iW780 devices can be used to control additional DC/DC converter stages on the secondary side, such as the ISL81401 or ISL8117, providing true multi-port solutions at power levels between 60W and 240W. The iW780 has several protection features and uses fully digital voltage compensation to eliminate the need for external passive components for loop compensation.
产品参数
属性 | 值 |
---|---|
Function | Zero Standby Power when paired with iW9870, Support USB PD 3.1 with EPR, Support multiple D+/D- fast charging protocols, Accurate multi-level voltage and current control, Built-in digital loop compensation minimizes BOM cost, Support single and multi-port adaptors up to 240W |
Supported Protocols | USB PD 3.0 w/PPS, USB PD 3.1 EPR |
封装选项
Pkg. Type | Lead Count (#) |
---|---|
TDFN-16L | 14 |
应用方框图
|
Wi-Fi 联网开关模式电源(SMPS)
支持 Wi-Fi 和低功耗蓝牙 SMPS 技术,可将高效智能家居设备的功耗维持在超低或零位水平。
|
|
100W/140W USB-C 和 USB PD 电源
具有多路输出、更高效率和高性价比设计的 USB-C 和 USB PD 电源。
|
|
高效ZVS 140W USB-C电源
140W USB-C 电源,支持 SuperGaN、自适应 ZVS、智能 PFC,以及 28V/5A 的高效。
|
|
65W USB-C 适配器,零待机功耗,支持单/双输出
紧凑型 65W USB-C 适配器,采用 USB PD 3.1 和 ZSP 设计,单/双端口充电,效率高。
|
|
240W USB PD AC/DC 适配器
高效 240W AC/DC 适配器,配备 USB PD 3.2 EPR 输出接口。
|
其他应用
- USB Power Delivery 3.1 EPR power supplies
- Multi-port chargers and adapters
当前筛选条件