跳转到主要内容

特性

  • Optimized for notebook/laptop/tablet PCs, smartphones/wireless handsets, high‑definition digital cameras, and set‑top boxes
  • 45mΩ RDSON while supporting 2.0A
  • Power supply/input voltage range: 1.5V ≤ VIN ≤ 5.5V
  • Reverse-current/voltage Protection
  • ON-OFF Control: Active LOW

描述

The SLG59M1641V is a dual-channel, 45mΩ PMOS load switch designed to switch 1.5V to 5.5 V power rails up to 2A in each channel. When either channel is enabled, reverse‑current protection will quickly open the switch in the event a reverse‑voltage condition is detected (a VOUT > VIN + 50mV condition opens the switch). If the channel’s VIN voltage is too low, the load switch also contains an internal UVLO threshold monitor to keep or to turn the switch OFF. Each load switch is independently controlled via its own low-voltage compatible CMOS input. Designed to operate over a -40 °C to 85 °C temperature range, the SLG59M1641V is available in a RoHS-compliant, ultra‑small 1.6mm x 1.0mm STDFN package.

产品参数

属性
FET Pass Device TypeDual P-Channel
VIN Channel 1 min. (V)1.5
VIN Channel 1 max. (V)5.5
VIN Channel 2 min. (V)1.5
VIN Channel 2 max. (V)5.5
RDSON (Typ) Channel 1 (mΩ)45
RDSON (Typ) Channel 2 (mΩ)45
IDS Channel 1 (A)2
IDS Channel 2 (A)2
EnableActive Low
Output Voltage Slew Rate set byNo
Discharge CircuitNo
Undervoltage ProtectionYes
Over Voltage ProtectionNo
Power Good (PG), FAULT indicatorNo
Reverse current blockingYes
Reverse voltage detectionYes
Over Current Protection (OCP)No
Short Circuit ProtectionNo
Over Temperature Protection (OTP)No
Current Monitor OutputNo
Internal TVS Surge ProtectionNo
Temp. Range (°C)-40 to +85°C

封装选项

Pkg. TypePkg. Dimensions (mm)Lead Count (#)Pitch (mm)
STDFN-81.0 x 1.6 mm80.4

应用

  • Power-Rail Switching
  • Notebook/Laptop/Tablet PCs
  • Smartphones/Wireless Handsets
  • High-definition Digital Cameras
  • Set-top Boxes
  • Point of Sales Pins
  • GPS Navigation Devices

当前筛选条件