跳转到主要内容
瑞萨电子 (Renesas Electronics Corporation) - June is Pride Month, a month to raise awareness of the rights and the culture of the LGBTQ+ community

描述

This driver controls Renesas serial EEPROM products that employ the latest memory technology to deliver low-voltage operation, low power consumption, high-speed operation, and high reliability. The driver is configured to work with the industry-standard bus of the serial EEPROM.

特性

  • Data can be read and written simply by calling user API functions.
  • The clock-synchronous serial I/O function of the microcontroller and a single port are used for control.
  • Learn More

目标设备

类型 文档标题 日期
应用说明 PDF 565 KB 日本語
This application note explains how to control and use R1EX25xxx and HN58X25xxx Series SPI serial EEPROM, manufactured by Renesas Electronics, with Renesas microcontrollers. The control software accompanying this application note is upper-layer software that controls the serial EEPROM as a slave device.
应用说明 PDF 579 KB 日本語
This application note describes the memory access driver interface module using Firmware Integration Technology (FIT).The MEMDRV FIT module functions as an adapter between an upper layer consisting of serial NOR or NAND flash command control middleware and a lower layer consisting of an RSPI, QSPI, QSPIX, SCI (SPI mode) device driver, or RSCI (SPI mode) device driver. The MEMDRV FIT module does not include NOR/NAND flash command control middleware or a RSPI/QSPI/QSPIX device driver. These must be obtained separately.
应用说明 PDF 1.10 MB 日本語
This application note describes a clock synchronous single master control module using Firmware Integration Technology (FIT), which uses clock synchronous serial communication over the quad serial peripheral interface (QSPI) on RX Family microcontrollers, and explains its use. SPI/QSPI mode single master control can be enabled by adding slave device selection control by means of port control. The QSPI FIT module implements single master basic control. Use the QSPI FIT module to create software for controlling slave devices.
应用说明 PDF 817 KB 日本語
This application note describes the enhanced serial communications interface (RSCI) module which uses Firmware Integration Technology (FIT). This module uses RSCI to provide Asynchronous, Synchronous, SPI (SSPI), and Manchester support for all channels of the RSCI peripheral.
应用说明 PDF 825 KB 日本語
This document covers the RSPI Module Using Firmware Integration Technology (FIT) for the supported RX family MCUs. Details are provided that describe the RSPI driver’s architecture, integration of the FIT module into a user's application, and how to use the API. The RX family MCUs supported by this module have a built-in Serial Peripheral Interface (RSPI) for up to three channels. The RSPI performs synchronous serial communication with full duplex or only transmission. It has a function that performs high-speed serial communication with multiple processors and peripheral devices.
应用说明 PDF 1.35 MB 日本語
This application note describes the serial communications interface (SCI) module and the infrared data association (IrDA) interface which uses Firmware Integration Technology (FIT). This module uses SCI to provide Asynchronous, Synchronous, and SPI (SSPI) support for all channels of the SCI peripheral and Infrared data communication support for the IrDA peripheral.
应用说明 PDF 665 KB 日本語
AI 生成的摘要: The software controls clock synchronous communication using the 3-wire serial I/O (CSI mode) of the RL78 microcontroller's serial array unit as a single master. It supports MSB-first transfer and CPU-driven data transfer but lacks chip-select control and DMA or interrupt-driven transfer. The software operates under specified conditions with RL78/G14 and Renesas R1EX25xxx SPI EEPROM, using CS+ development environments and standard compiler settings.
应用说明 PDF 802 KB 日本語
AI 生成的摘要: The document details a sample program for RX family microcontrollers using RSPI for clock synchronous single master control via a three-wire serial communication method. It supports single-channel operation with MSB-first data transfer in both big and little endian formats. The code excludes chip select control and DMA transfers and allows normal or high-speed receive modes. Supervisor mode operation is required for high-speed mode, while normal mode supports both user and supervisor modes. The RSPI module's features and peripheral usage are outlined, including port requirements for slave device selection.
应用说明 PDF 1.79 MB 日本語
AI 生成的摘要: The document details the Renesas R1EX25xxx Series Serial EEPROM control software for RX, RL78, and 78KOR/Kx3-L MCU families. It describes driver initialization, read/write processes, command handling, and internal functions. The software manages SPI Serial EEPROM devices via MCU's synchronous serial communication, supporting up to two devices with configurable communication speed and endian modes. Evaluation conditions for RX610 MCU include operating frequency, voltage, development environment, and compiler settings.
应用说明 PDF 1.15 MB 日本語
AI 生成的摘要: This document details the implementation of clock synchronous single master control using the SCI interface on RX family microcontrollers. It supports SPI mode with software-based MSB-first data transfer and both big and little endian formats. The sample code handles single master transmit, receive, and transmit/receive operations using CPU transfers only, without support for DMAC, EXDMAC, DTC, or interrupt-driven transfers. Chip select control is not included and must be implemented separately if needed.
应用说明 PDF 241 KB 日本語
应用说明 PDF 257 KB 日本語
AI 生成的摘要: The document details verified operating conditions for RX62N microcontrollers interfacing with various serial EEPROM and flash memory devices, specifying clock frequencies, voltages, development environments, and compiler settings. It explains RSPI module operation modes, focusing on clock synchronous (three-wire) operation, and describes hardware connections including pin functions and the need for external pull-up resistors and circuit matching components for high-speed operation.
12 项目

样例程序

样例程序

筛选
类型 文档标题 日期 日期
示例代码
[Software=RX Driver Package|V1.50],[Toolchains=CC-RX|V3.07.00;GNURX|14.02.00.202511;CCRX|5.20.01]
登录后下载 ZIP 3.08 MB
应用: 医疗与保健, 工业, 消费电子产品
Compiler: CC-RX, GNURX, ICCRX Function: Communication Interface, Driver or Library IDE: e2 studio, IAR EWRX
示例代码
[Software=RX Driver Package|V1.50],[Toolchains=CC-RX|V3.07.00;GNURX|14.02.00.202511;CCRX|5.20.01]
登录后下载 ZIP 8.07 MB
应用: 工业
Compiler: CC-RX, GNURX, ICCRX Function: Communication Interface, Driver or Library IDE: e2 studio, IAR EWRX
示例代码
[Software=RX Driver Package|V1.50],[Toolchains=CC-RX|V3.07.00;GNURX|14.02.00.202511;CCRX|5.20.01]
登录后下载 ZIP 11.34 MB
应用: 工业
Compiler: CC-RX, GNURX, ICCRX Function: Communication Interface, Driver or Library IDE: e2 studio, IAR EWRX
示例代码
[Software=RX Driver Package|V1.50],[Toolchains=CC-RX|V3.07.00;GNURX|14.02.00.202511;CCRX|5.20.01]
登录后下载 ZIP 5.82 MB
应用: 工业
Compiler: CC-RX, GNURX, ICCRX Function: Communication Interface, Driver or Library IDE: e2 studio, IAR EWRX
示例代码
[Software=RX Driver Package|V1.50],[Toolchains=CC-RX|V3.07.00;GNURX|14.02.00.202511;CCRX|5.20.01]
登录后下载 ZIP 6.94 MB
应用: 工业
Compiler: CC-RX, GNURX, ICCRX Function: Communication Interface, Driver or Library IDE: e2 studio, IAR EWRX
示例代码
[Software=RX Driver Package|V1.50],[Toolchains=CC-RX|V3.07.00;GNURX|14.02.00.202511;CCRX|5.20.01]
登录后下载 ZIP 23.17 MB
应用: 工业
Compiler: CC-RX, GNURX, ICCRX Function: Communication Interface, Driver or Library IDE: e2 studio, IAR EWRX
示例代码
[Toolchains=CC-RL|v1.10.00;ICCRL78|4.21.1.2409;LLVM for Renesas RL78|10.0.0.202203]
登录后下载 ZIP 1.61 MB
应用: 工业, 消费电子产品
Compiler: CC-RL, ICCRL78, LLVM Function: Application Example IDE: CS+, e2 studio, IAR EWRL78
示例代码
登录后下载 ZIP 871 KB 日本語 Compiler: CC-RX IDE: CS+ for CC, e2 studio
示例代码
登录后下载 ZIP 1.80 MB 日本語 Compiler: CA78K0R, CC-RL, ICCRL78 IDE: CS+ for CA, CX, CS+ for CC, IAR EWRL78
示例代码
登录后下载 ZIP 698 KB 日本語
示例代码
登录后下载 ZIP 270 KB 日本語
示例代码
登录后下载 ZIP 284 KB 日本語
12 项目

Application Examples

  • Mobile phones/Cordless phones/Fax machine: Abbreviated dialing systems/Communication History Administration
  • TV/VCR/Remote Control; Channel, Mode setting
  • Measurement devices: Application Software, Log data storage
  • Home telephones: Fine adjustment setting, usage status history administration
  • LCD TV: Parameter settings
  • Camera modules: Adjustment settings
  • DVC: Adjustment settings
图像
 app-eeprom-driver

System Configuration

For systems on which the following devices are mounted, you can use it to control the each devices:

Slave DeviceRenesas Serial EEPROM
(R1EX25xxx and HN58X25xxx Series)
Master DeviceRenesas MCU (RX Family, RL78 Family)

Please refer to Supported Memory for detailed Memory Information, Target devices and Products lineup for detailed MCU information.

Support Memory

R1EX25xxx Series

  • R1EX25512A(512Kbit)
  • R1EX25064A(64Kbit)
  • R1EX25032A(32Kbit)
  • R1EX25016A(16Kbit)
  • R1EX25008A(8Kbit)
  • R1EX25004A(4Kbit)
  • R1EX25002A(2Kbit)

HN58X25xxx Series

  • HN58X25256(256Kbit)
  • HN58X25128 (128Kbit)

Target Devices and Products lineup

Here we present each software lineup by MCU. Please refer to each application note for a corresponding Integrated Development Environment.

RX Family (FIT module) RX Family (except FIT module), RL78 Family Other

RX Family (FIT module)

The software components shown in the figure below are FIT modules based on the Renesas Firmware Integration Technology (FIT). You can easily embed sample code in user applications by combining the required FIT modules. For example, you can use the DMAC or DTC FIT module to handle transfer by the DMAC or DTC. (About FIT)

The RX Driver Package provides the set of FIT modules. Obtain the package, and you can then download the set of FIT modules you require. Furthermore, FIT modules work in combination with the Smart Configurator, which eases both downloading of the FIT modules and embedding them in user applications.

图像
RX Family (FIT module)
Sample Program list
Slave Device Control Software (Higher-level layer of the software)
Target MemoryApplication Note Title
R1EX25xxx and HN58X25xxx Series SPI Serial EEPROMRX Family Clock Synchronous Control Module for EEPROM Access Firmware Integration Technology Rev.3.23 - Sample Code (ZIP)
Clock Synchronous Single Master Control Software (Lower-level layer of the software)

RX Family (except FIT module), RL78 Family

图像
RX (except FIT module), RL78 Family
Sample Program list
Slave Device Control Software (Higher-level layer of the software)
Target MemoryApplication Note Title
R1EX25xxx and HN58X25xxx Series SPI Serial EEPROMRX Family, RL78 Family, 78K0R/Kx3-L Renesas R1EX25xxx Series Serial EEPROM Control Software Rev.1.06 - Sample Code (ZIP | English, 日本語)
Clock Synchronous Single Master Control Software (Lower-level layer of the software)

Other

The following software items are specific to the respective device families listed below and are used to control both slave and master devices.

Slave Device and Master Device Control Software (Common Software)

The software items listed below can be used in combination with the "RX Family, RL78 Family, 78K0R/Kx3-L Renesas R1EX25xxx Series Serial EEPROM Control Software" .

Clock Synchronous Single Master Control Software (Lower-level layer of the software)
支持社区

支持社区

在线询问瑞萨电子工程社群的技术人员,快速获得技术支持。
浏览文章

知识库

浏览我们的知识库,获取文章、常见问题解答及其他实用资源。
提交工单

提交工单

需要咨询技术性问题或提供非公开信息吗?