概述
描述
This driver controls Renesas serial EEPROM products that employ the latest memory technology to deliver low-voltage operation, low power consumption, high-speed operation, and high reliability. The driver is configured to work with the industry-standard bus of the serial EEPROM.
特性
- The microcontroller's on-chip I2C control circuit is used for control.
- Data can be read and written simply by calling user API functions.
- Simultaneous communication on multiple channels is supported.
- Multiple slave devices with different model numbers can be controlled via a single channel bus.
- Learn More
目标设备
文档
请登录后开启订阅
|
|
|
|
|---|---|---|
| 类型 | 文档标题 | 日期 |
| 应用说明 |
PDF
969 KB
日本語
This application note describes the I2C bus interface (RIIC) module using firmware integration technology (FIT) for communications between devices using the I2C bus interface.
|
|
| 应用说明 |
PDF
1.13 MB
日本語
AI 生成的摘要:
This application note describes the simple I2C module using firmware integration technology (FIT) for communications between devices using the serial communications interface (SCI).
|
|
| 工具新闻 - 注意事项 | PDF 236 KB 日本語 | |
| 应用说明 |
PDF
829 KB
日本語
AI 生成的摘要:
The document details software for single master control of the FC bus using the RL78 Family microcontroller's IICA serial interface. It supports master transmission, reception, and composite operations with up to four transmission patterns. Multiple channels and slave devices can be managed, though communication with other devices is blocked during active communication. The software handles protocol control via start and advance functions, supports communication rates up to 400 kHz, and includes error handling for noise and NACK conditions. It only supports 7-bit addressing and provides SCL pseudo clock generation to recover from bus lock conditions.
|
|
| 应用说明 |
PDF
688 KB
日本語
AI 生成的摘要:
The document details control software for Renesas R1EX24xxx series serial EEPROMs using Renesas MCUs. It explains communication protocols including write, acknowledge polling, and read operations via I2C single master control software. The software supports multiple channels and slave devices, handles address conversion based on EEPROM capacity, and includes recovery functions for bus errors. It also outlines peripheral functions and usage examples for serial EEPROM communication.
|
|
| 应用说明 |
PDF
1.36 MB
日本語
AI 生成的摘要:
The RX600 and RX200 series IC bus single master control software uses the RIIC serial interface to manage I²C communication. It supports master transmission, reception, and composite operations with multiple channels and slave devices. The software handles start and stop conditions, error detection including NACK and no response errors, and allows user-configurable communication rates up to 400 kHz. It also includes functions for SCL pseudo clock generation to resolve synchronization issues and supports only 7-bit addressing.
|
|
6 项目
|
||
设计和开发
样例程序
样例程序
筛选
|
||
|---|---|---|
| 类型 | 文档标题 | 日期 日期 |
| 示例代码 | RX Family I2C Bus Interface (RI2C) Module Using Firmware Integration Technology Rev.3.11 - Sample Code
[Software=RX Driver Package|V1.50],[Toolchains=CC-RX|V3.07.00;GNURX|14.02.00.202511;CCRX|5.20.01]
ZIP
22.57 MB
应用:
工业
Compiler:
CC-RX, GNURX, ICCRX
Function:
Communication Interface, Driver or Library
IDE:
e2 studio, IAR EWRX
|
|
| 示例代码 | RX Family Simple I2C Module Using Firmware Integration Technology Rev.2.91 - Sample Code
[Software=RX Driver Package|V1.50],[Toolchains=CC-RX|V3.07.00;GNURX|14.02.00.202511;CCRX|5.20.01]
ZIP
16.24 MB
应用:
工业
Compiler:
CC-RX, GNURX, ICCRX
Function:
Communication Interface, Driver or Library
IDE:
e2 studio, IAR EWRX
|
|
| 示例代码 | RL78/G14, RL78/G1C, RL78/L12, RL78/L13, RL78/L1C Group I2C Bus Single Master Control Software Using IICA Serial Interface Rev.1.04 - Sample Code
|
|
| 示例代码 | RX Family, RL78 Family Renesas R1EX24xxx Series Serial EEPROM Control Software Rev.1.03 - Sample Code
|
|
| 示例代码 | RX600, RX200 Series I²C Bus Single Master Control Software Using RIIC Serial Interface Rev.1.03 - Sample Code
|
|
5 项目
|
||
Additional Details
Application Examples
- Mobile phones/Cordless phones/Fax machine: Abbreviated dialing systems/Communication History Administration
- TV/VCR/Remote Control; Channel, Mode setting
- Measurement devices: Application Software, Log data storage
- Home telephones: Fine adjustment setting, usage status history administration
- LCD TV: Parameter settings
- Camera modules: Adjustment settings
- DVC: Adjustment settings
图像
System Configuration
For systems on which the following devices are mounted, you can use it to control the each devices:
| Slave Device | Renesas I2C Serial EEPROM (R1EX24xxx Series) |
|---|---|
| Master Device | Renesas MCU (RX Family, RL78 Family) |
Please refer to Supported Memory for detailed Memory Information, Target Devices and Product Lineup for detailed MCU information.
Supported Memory
R1EX24xxx Series
- R1EX24512B (512K bit)
- R1EX24256B (256K bit)
- R1EX24128B (128K bit)
- R1EX24064A (64K bit)
- R1EX24032A (32K bit)
- R1EX24016A (16K bit)
- R1EX24008A (8K bit)
- R1EX24004A (4K bit)
- R1EX24002A (2K bit)
Target Devices and Products Lineup
Here we present each software lineup by MCU. Please refer to each application note for a corresponding Integrated Development Environment.
RX Family (FIT module) RX Family (except FIT module), RL78 Family
RX Family (FIT module)
The software components shown in the figure below are FIT modules based on the Renesas Firmware Integration Technology (FIT). You can easily embed sample code in user applications by combining the required FIT modules. (About FIT)
The RX Driver Package provides the set of FIT modules. Obtain the package, and you can then download the set of FIT modules you require. Furthermore, FIT modules work in combination with the Smart Configurator, which eases both downloading of the FIT modules and embedding them in user applications.
图像
Sample Program list
I2C Single Master Control Software
| Target MCU | Application Note Title |
|---|---|
| RX-family MCUs that support FIT modules | RX Family I2C Bus Interface (RI2C) Module Using Firmware Integration Technology Rev.3.11 - Sample Code (ZIP) |
| RX Family Simple I2C Module Using Firmware Integration Technology Rev.2.91 - Sample Code (ZIP) |
RX Family (except FIT module), RL78 Family
图像
Sample Program List
Slave Device Control Software (Higher-level layer of the software)
| Target Memory | Application Note Title |
|---|---|
| I2C Serial EEPROM: R1EX24xxx Series, R1EV24xxx Series | RX Family, RL78 Family Renesas R1EX24xxx Series Serial EEPROM Control Software Rev.1.03 - Sample Code (ZIP | English, 日本語) |
I2C Single Master Control Software (Lower-level layer of the software)
| Target Device | Application Note Title |
|---|---|
| RX Family: RX62N, RX63N, RX63T, RX210, RX21A | RX600, RX200 Series I²C Bus Single Master Control Software Using RIIC Serial Interface Rev.1.03 - Sample Code (ZIP | English, 日本語) |
| RL78 Family: RL78/G14, RL78/G1C, RL78/L12, RL78/L13, RL78/L1C | RL78/G14, RL78/G1C, RL78/L12, RL78/L13, RL78/L1C Group I2C Bus Single Master Control Software Using IICA Serial Interface Rev.1.04 - Sample Code (ZIP | English, 日本語) |
