跳转到主要内容

特性

  • CPU:RL78 内核,最高 16MHz
  • 电压:2.4V 到 5.5V
  • 封装:8 到 20 引脚
  • 闪存:程序闪存:4/8KB,SRAM 1KB,数据闪存 1KB
  • 工作温度:不超过 125°C
  • 定时器:8 路 16 位定时器,1 路看门狗定时器,1 路 12 位间隔定时器
  • 模拟功能:11 路 10 位 A/D 转换器,比较器
  • 片上振荡器 (MHz):高速:1、2、4、8、16MHz;低速:15kHz
  • 连接:SCI(CSI、UART、简单版 I2C)、I2C
  • 其他:可选通电重置、低电压检测、片上调试 2.4V 到 5.5V(单线、双线)

描述

RL78/G15是一种通用微控制器,工作频率为16MHz。包括RL78系列最小的8引脚封装在内,我们提供丰富的产品阵容,适用于-40℃-125℃的各种工作环境温度。产品内置高精度(±1.0%)高速片上振荡器、数据闪存和丰富的串行接口和比较器,因此适合需要节省空间的小型应用场景。RL78/G15包括丰富的开发环境,只需连接USB线缆, 即可编写和调试评估板(Fast Prototyping Board)、可通过GUI简化软件设计的Smart Configurator和Arduino库等。它与现有的RL78系列兼容,适用于家电、消费类电子产品到工业设备的广泛用途。

产品参数

属性
Program Memory (KB) 4, 8
Data Flash (KB) 1
RAM (KB) 1
Carrier Type Full Carton (Tray), Full Magazine, Full Tray (Tray), Magazine, Tape & Reel
Supply Voltage (V) -
I/O Ports 6, 8, 14, 18
Temp. Range (°C) Ta = -40 to +85, Ta = -40 to +105, Ta = -40 to +125
Operating Freq (Max) (MHz) 16
USB FS (host ch/device ch) ( 0 / 0 )
SCI or UART (ch) 1
SPI (ch) 1, 2
I2C (#) 2, 3
CAN (ch) 0
CAN-FD (ch) 0
Wireless No
LIN (#) 0
16-Bit Timer (ch) (#) 8
12-Bit A/D Converter (ch) 0
10-Bit A/D Converter (ch) 3, 4, 7, 11
24-Bit Sigma-Delta A/D Converter (ch) 0
12-Bit D/A Converter (ch) 0
10-Bit D/A Converter (ch) (#) 0
8-Bit D/A Converter (ch) 0
Capacitive Touch Sensing Unit (ch) 0
Segment LCD Controller No
Security & Encryption No

封装选项

Pkg. Type Pkg. Dimensions (mm) Lead Count (#) Pitch (mm)
HWQFN 3 x 3 x 0.8 16 0.5
LSSOP 4.4 x 3.6 x 1.45 10 0.65
LSSOP 6 x 4 x 1.45 20 0.65
SOP 3.9 x 4.9 x 1.75 8 1.27
SSOP 5 x 4.4 x 1.73 16 0.65
TSSOP 6.5 x 4.4 x 1.2 20 0.65
WDFN 3 x 3 x 0.8 8 0.65

应用方框图

100W Multi-Output USB Power Delivery Adapter Block Diagram
100W 多路输出 USB PD 电源适配器
高性能 USB PD 电源适配器,可为多个电子设备高效充电。

其他应用

  • 通用
  • 民用
  • 家电
  • 工业自动化
  • 楼宇自动化

当前筛选条件

This video introduces how to add the RL78 board platform released by Renesas Electronics 
on GitHub to Arduino IDE version 1 and run sketches.

Related resources: Quick Start Guide page (GitHub)

00:00 Opening
00:30 Install the Arduino IDE
00:47 Install the tools
01:54 Write the sketch
02:02 COM port setting
02:29 Board setting
02:44 Compile, upload, LED blinking